From: Frank Wunderlich <linux@fw-web.de>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: Frank Wunderlich <frank-w@public-files.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH v3 00/22] continue mt7988 devicetree work
Date: Tue, 17 Dec 2024 10:12:14 +0100 [thread overview]
Message-ID: <20241217091238.16032-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
This series adds some missing labels and new nodes to mt7988 DTS.
based on pinctrl-series
https://patchwork.kernel.org/project/linux-mediatek/list/?series=918572
changes:
v3:
- reorder
- small fixes
- add some new patches (t-phy, pcie, mmc overlays)
- dropped pmic and proc-supply for now because we found a mismatch compared with schematic
v2:
- reorder and squash label-commits to where they are used
- add some more nodes
- add changes to bananapi-r4 board
- moving some nodes from SoC dtsi to board dts
Frank Wunderlich (22):
arm64: dts: mediatek: mt7988: Add reserved memory
arm64: dts: mediatek: mt7988: Add mmc support
arm64: dts: mediatek: mt7988: Add lvts node
arm64: dts: mediatek: mt7988: Add thermal-zone
arm64: dts: mediatek: mt7988: Add missing clock-div property for i2c
arm64: dts: mediatek: mt7988: Add mcu-sys node for cpu
arm64: dts: mediatek: mt7988: Add CPU OPP table for clock scaling
arm64: dts: mediatek: mt7988: Disable usb controllers by default
arm64: dts: mediatek: mt7988: Add t-phy for ssusb1
arm64: dts: mediatek: mt7988: Add pcie nodes
arm64: dts: mediatek: mt7988a-bpi-r4: Enable watchdog
arm64: dts: mediatek: mt7988a-bpi-r4: Add fixed regulators for 1v8 and
3v3
arm64: dts: mediatek: mt7988a-bpi-r4: Add dt overlays for sd + emmc
arm64: dts: mediatek: mt7988a-bpi-r4: Add thermal configuration
arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart
arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout
arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers
arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux
arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1
arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie
arch/arm64/boot/dts/mediatek/Makefile | 3 +
.../mt7988a-bananapi-bpi-r4-emmc.dtso | 33 ++
.../mediatek/mt7988a-bananapi-bpi-r4-sd.dtso | 31 ++
.../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 143 +++++++++
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 303 +++++++++++++++++-
5 files changed, 506 insertions(+), 7 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Frank Wunderlich <linux@fw-web.de>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/22] continue mt7988 devicetree work
Date: Tue, 17 Dec 2024 10:12:14 +0100 [thread overview]
Message-ID: <20241217091238.16032-1-linux@fw-web.de> (raw)
From: Frank Wunderlich <frank-w@public-files.de>
This series adds some missing labels and new nodes to mt7988 DTS.
based on pinctrl-series
https://patchwork.kernel.org/project/linux-mediatek/list/?series=918572
changes:
v3:
- reorder
- small fixes
- add some new patches (t-phy, pcie, mmc overlays)
- dropped pmic and proc-supply for now because we found a mismatch compared with schematic
v2:
- reorder and squash label-commits to where they are used
- add some more nodes
- add changes to bananapi-r4 board
- moving some nodes from SoC dtsi to board dts
Frank Wunderlich (22):
arm64: dts: mediatek: mt7988: Add reserved memory
arm64: dts: mediatek: mt7988: Add mmc support
arm64: dts: mediatek: mt7988: Add lvts node
arm64: dts: mediatek: mt7988: Add thermal-zone
arm64: dts: mediatek: mt7988: Add missing clock-div property for i2c
arm64: dts: mediatek: mt7988: Add mcu-sys node for cpu
arm64: dts: mediatek: mt7988: Add CPU OPP table for clock scaling
arm64: dts: mediatek: mt7988: Disable usb controllers by default
arm64: dts: mediatek: mt7988: Add t-phy for ssusb1
arm64: dts: mediatek: mt7988: Add pcie nodes
arm64: dts: mediatek: mt7988a-bpi-r4: Enable watchdog
arm64: dts: mediatek: mt7988a-bpi-r4: Add fixed regulators for 1v8 and
3v3
arm64: dts: mediatek: mt7988a-bpi-r4: Add dt overlays for sd + emmc
arm64: dts: mediatek: mt7988a-bpi-r4: Add thermal configuration
arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart
arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout
arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers
arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux
arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1
arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie
arch/arm64/boot/dts/mediatek/Makefile | 3 +
.../mt7988a-bananapi-bpi-r4-emmc.dtso | 33 ++
.../mediatek/mt7988a-bananapi-bpi-r4-sd.dtso | 31 ++
.../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 143 +++++++++
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 303 +++++++++++++++++-
5 files changed, 506 insertions(+), 7 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
--
2.43.0
next reply other threads:[~2024-12-17 9:22 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-17 9:12 Frank Wunderlich [this message]
2024-12-17 9:12 ` [PATCH v3 00/22] continue mt7988 devicetree work Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 01/22] arm64: dts: mediatek: mt7988: Add reserved memory Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 02/22] arm64: dts: mediatek: mt7988: Add mmc support Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 03/22] arm64: dts: mediatek: mt7988: Add lvts node Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 04/22] arm64: dts: mediatek: mt7988: Add thermal-zone Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 05/22] arm64: dts: mediatek: mt7988: Add missing clock-div property for i2c Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 06/22] arm64: dts: mediatek: mt7988: Add mcu-sys node for cpu Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 07/22] arm64: dts: mediatek: mt7988: Add CPU OPP table for clock scaling Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 08/22] arm64: dts: mediatek: mt7988: Disable usb controllers by default Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 09/22] arm64: dts: mediatek: mt7988: Add t-phy for ssusb1 Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 10/22] arm64: dts: mediatek: mt7988: Add pcie nodes Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 11/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable watchdog Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 12/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add fixed regulators for 1v8 and 3v3 Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 13/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add dt overlays for sd + emmc Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 14/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add thermal configuration Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 15/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 16/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 17/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 18/22] arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 19/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1 Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 20/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4 Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 21/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-17 9:12 ` [PATCH v3 22/22] arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie Frank Wunderlich
2024-12-17 9:12 ` Frank Wunderlich
2024-12-18 14:10 ` [PATCH v3 00/22] continue mt7988 devicetree work AngeloGioacchino Del Regno
2024-12-18 14:10 ` AngeloGioacchino Del Regno
2025-01-02 12:46 ` AngeloGioacchino Del Regno
2025-01-02 12:46 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241217091238.16032-1-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.