From: Joey Lu <a0987203069@gmail.com>
To: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
mcoquelin.stm32@gmail.com, richardcochran@gmail.com
Cc: alexandre.torgue@foss.st.com, joabreu@synopsys.com,
ychuang3@nuvoton.com, schung@nuvoton.com, yclu4@nuvoton.com,
peppe.cavallaro@st.com, linux-arm-kernel@lists.infradead.org,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
linux-stm32@st-md-mailman.stormreply.com,
Joey Lu <a0987203069@gmail.com>
Subject: [PATCH v5 2/3] arm64: dts: nuvoton: Add Ethernet nodes
Date: Wed, 18 Dec 2024 19:44:41 +0800 [thread overview]
Message-ID: <20241218114442.137884-3-a0987203069@gmail.com> (raw)
In-Reply-To: <20241218114442.137884-1-a0987203069@gmail.com>
Add GMAC nodes for our MA35D1 development boards:
two RGMII interfaces for SOM board, and one RGMII and one RMII
interface for IoT board.
Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
.../boot/dts/nuvoton/ma35d1-iot-512m.dts | 12 +++++
.../boot/dts/nuvoton/ma35d1-som-256m.dts | 10 ++++
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 54 +++++++++++++++++++
3 files changed, 76 insertions(+)
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
index 9482bec1aa57..5cc712ae92d8 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -18,6 +18,8 @@ aliases {
serial12 = &uart12;
serial13 = &uart13;
serial14 = &uart14;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
};
chosen {
@@ -126,3 +128,13 @@ &uart14 {
pinctrl-0 = <&pinctrl_uart14>;
status = "okay";
};
+
+&gmac0 {
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&gmac1 {
+ phy-mode = "rmii";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..1d9ac350a1f1 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -18,6 +18,8 @@ aliases {
serial12 = &uart12;
serial14 = &uart14;
serial16 = &uart16;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
};
chosen {
@@ -129,3 +131,11 @@ &uart16 {
pinctrl-0 = <&pinctrl_uart16>;
status = "okay";
};
+
+&gmac0 {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..89712e262ee6 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -379,5 +379,59 @@ uart16: serial@40880000 {
clocks = <&clk UART16_GATE>;
status = "disabled";
};
+
+ gmac0: ethernet@40120000 {
+ compatible = "nuvoton,ma35d1-dwmac";
+ reg = <0x0 0x40120000 0x0 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
+ clock-names = "stmmaceth", "ptp_ref";
+
+ nuvoton,sys = <&sys 0>;
+ resets = <&sys MA35D1_RESET_GMAC0>;
+ reset-names = "stmmaceth";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <ð_phy0>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+
+ gmac1: ethernet@40130000 {
+ compatible = "nuvoton,ma35d1-dwmac";
+ reg = <0x0 0x40130000 0x0 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clk EMAC1_GATE>, <&clk EPLL_DIV8>;
+ clock-names = "stmmaceth", "ptp_ref";
+
+ nuvoton,sys = <&sys 1>;
+ resets = <&sys MA35D1_RESET_GMAC1>;
+ reset-names = "stmmaceth";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <ð_phy1>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
};
};
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Joey Lu <a0987203069@gmail.com>
To: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
mcoquelin.stm32@gmail.com, richardcochran@gmail.com
Cc: devicetree@vger.kernel.org, ychuang3@nuvoton.com,
Joey Lu <a0987203069@gmail.com>,
netdev@vger.kernel.org, openbmc@lists.ozlabs.org,
alexandre.torgue@foss.st.com, linux-kernel@vger.kernel.org,
joabreu@synopsys.com, schung@nuvoton.com, peppe.cavallaro@st.com,
yclu4@nuvoton.com, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 2/3] arm64: dts: nuvoton: Add Ethernet nodes
Date: Wed, 18 Dec 2024 19:44:41 +0800 [thread overview]
Message-ID: <20241218114442.137884-3-a0987203069@gmail.com> (raw)
In-Reply-To: <20241218114442.137884-1-a0987203069@gmail.com>
Add GMAC nodes for our MA35D1 development boards:
two RGMII interfaces for SOM board, and one RGMII and one RMII
interface for IoT board.
Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
.../boot/dts/nuvoton/ma35d1-iot-512m.dts | 12 +++++
.../boot/dts/nuvoton/ma35d1-som-256m.dts | 10 ++++
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 54 +++++++++++++++++++
3 files changed, 76 insertions(+)
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
index 9482bec1aa57..5cc712ae92d8 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -18,6 +18,8 @@ aliases {
serial12 = &uart12;
serial13 = &uart13;
serial14 = &uart14;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
};
chosen {
@@ -126,3 +128,13 @@ &uart14 {
pinctrl-0 = <&pinctrl_uart14>;
status = "okay";
};
+
+&gmac0 {
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&gmac1 {
+ phy-mode = "rmii";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..1d9ac350a1f1 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -18,6 +18,8 @@ aliases {
serial12 = &uart12;
serial14 = &uart14;
serial16 = &uart16;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
};
chosen {
@@ -129,3 +131,11 @@ &uart16 {
pinctrl-0 = <&pinctrl_uart16>;
status = "okay";
};
+
+&gmac0 {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..89712e262ee6 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -379,5 +379,59 @@ uart16: serial@40880000 {
clocks = <&clk UART16_GATE>;
status = "disabled";
};
+
+ gmac0: ethernet@40120000 {
+ compatible = "nuvoton,ma35d1-dwmac";
+ reg = <0x0 0x40120000 0x0 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
+ clock-names = "stmmaceth", "ptp_ref";
+
+ nuvoton,sys = <&sys 0>;
+ resets = <&sys MA35D1_RESET_GMAC0>;
+ reset-names = "stmmaceth";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <ð_phy0>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+
+ gmac1: ethernet@40130000 {
+ compatible = "nuvoton,ma35d1-dwmac";
+ reg = <0x0 0x40130000 0x0 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clk EMAC1_GATE>, <&clk EPLL_DIV8>;
+ clock-names = "stmmaceth", "ptp_ref";
+
+ nuvoton,sys = <&sys 1>;
+ resets = <&sys MA35D1_RESET_GMAC1>;
+ reset-names = "stmmaceth";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <ð_phy1>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
};
};
--
2.34.1
next prev parent reply other threads:[~2024-12-18 11:49 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-18 11:44 [PATCH v5 0/3] Add support for Nuvoton MA35D1 GMAC Joey Lu
2024-12-18 11:44 ` Joey Lu
2024-12-18 11:44 ` [PATCH v5 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC Joey Lu
2024-12-18 11:44 ` Joey Lu
2024-12-31 1:03 ` Rob Herring (Arm)
2024-12-31 1:03 ` Rob Herring (Arm)
2024-12-18 11:44 ` Joey Lu [this message]
2024-12-18 11:44 ` [PATCH v5 2/3] arm64: dts: nuvoton: Add Ethernet nodes Joey Lu
2024-12-18 11:44 ` [PATCH v5 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family Joey Lu
2024-12-18 11:44 ` Joey Lu
2024-12-18 13:26 ` Przemek Kitszel
2024-12-18 13:26 ` Przemek Kitszel
2024-12-20 7:07 ` Joey Lu
2024-12-20 10:59 ` Przemek Kitszel
2024-12-20 10:59 ` Przemek Kitszel
2024-12-24 9:37 ` Joey Lu
2024-12-24 9:37 ` Joey Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241218114442.137884-3-a0987203069@gmail.com \
--to=a0987203069@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
--cc=yclu4@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.