All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@edgeble.ai>
To: Heiko Stuebner <heiko@sntech.de>, linux-rockchip@lists.infradead.org
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Jagan Teki <jagan@edgeble.ai>
Subject: [PATCH 2/2] arm64: dts: rockchip: Enable HDMI1 out for Edgeble-6TOPS Modules
Date: Thu, 26 Dec 2024 23:05:30 +0530	[thread overview]
Message-ID: <20241226173530.37037-2-jagan@edgeble.ai> (raw)
In-Reply-To: <20241226173530.37037-1-jagan@edgeble.ai>

Edgeble-6TOPS modules configure HDMI1 for HDMI Out from RK3588.

Enable it on Edgeble-6TOPS IO Board dtsi.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
 .../dts/rockchip/rk3588-edgeble-neu6a-io.dtsi | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
index 7125790bbed2..4883b31ddeaf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
@@ -4,12 +4,24 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 
 / {
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	/* Unnamed gated oscillator: 100MHz,3.3V,3225 */
 	pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator {
 		compatible = "gated-fixed-clock";
@@ -81,6 +93,26 @@ &combphy2_psu {
 	status = "okay";
 };
 
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdptxphy_hdmi1 {
+	status = "okay";
+};
+
 &i2c6 {
 	status = "okay";
 
@@ -275,3 +307,18 @@ &usb_host1_ohci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp0>;
+	};
+};
-- 
2.34.1



WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@edgeble.ai>
To: Heiko Stuebner <heiko@sntech.de>, linux-rockchip@lists.infradead.org
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Jagan Teki <jagan@edgeble.ai>
Subject: [PATCH 2/2] arm64: dts: rockchip: Enable HDMI1 out for Edgeble-6TOPS Modules
Date: Thu, 26 Dec 2024 23:05:30 +0530	[thread overview]
Message-ID: <20241226173530.37037-2-jagan@edgeble.ai> (raw)
In-Reply-To: <20241226173530.37037-1-jagan@edgeble.ai>

Edgeble-6TOPS modules configure HDMI1 for HDMI Out from RK3588.

Enable it on Edgeble-6TOPS IO Board dtsi.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
 .../dts/rockchip/rk3588-edgeble-neu6a-io.dtsi | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
index 7125790bbed2..4883b31ddeaf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
@@ -4,12 +4,24 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 
 / {
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	/* Unnamed gated oscillator: 100MHz,3.3V,3225 */
 	pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator {
 		compatible = "gated-fixed-clock";
@@ -81,6 +93,26 @@ &combphy2_psu {
 	status = "okay";
 };
 
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdptxphy_hdmi1 {
+	status = "okay";
+};
+
 &i2c6 {
 	status = "okay";
 
@@ -275,3 +307,18 @@ &usb_host1_ohci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp0>;
+	};
+};
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2024-12-26 17:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-26 17:35 [PATCH 1/2] arm64: dts: rockchip: Add HDMI1 node to rk3588 Jagan Teki
2024-12-26 17:35 ` Jagan Teki
2024-12-26 17:35 ` Jagan Teki [this message]
2024-12-26 17:35   ` [PATCH 2/2] arm64: dts: rockchip: Enable HDMI1 out for Edgeble-6TOPS Modules Jagan Teki
2024-12-26 20:10 ` [PATCH 1/2] arm64: dts: rockchip: Add HDMI1 node to rk3588 Heiko Stübner
2024-12-26 20:10   ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241226173530.37037-2-jagan@edgeble.ai \
    --to=jagan@edgeble.ai \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.