From: Pengyu Luo <mitltlatltl@gmail.com>
To: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konradybcio@kernel.org>,
"Hans de Goede" <hdegoede@redhat.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
"Sebastian Reichel" <sre@kernel.org>,
"Heikki Krogerus" <heikki.krogerus@linux.intel.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
platform-driver-x86@vger.kernel.org, linux-pm@vger.kernel.org,
linux-usb@vger.kernel.org,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Nikita Travkin <nikita@trvn.ru>,
Pengyu Luo <mitltlatltl@gmail.com>
Subject: [PATCH 5/5] arm64: dts: qcom: gaokun3: Add Embedded Controller node
Date: Sat, 28 Dec 2024 01:13:53 +0800 [thread overview]
Message-ID: <20241227171353.404432-6-mitltlatltl@gmail.com> (raw)
In-Reply-To: <20241227171353.404432-1-mitltlatltl@gmail.com>
The Embedded Controller in the Huawei Matebook E Go (s8280xp)
is accessible on &i2c15 and provides battery and adapter status,
port orientation status, as well as HPD event notifications for
two USB Type-C port, etc.
Add the EC to the device tree and describe the relationship among
the type-c ports, orientation switches and the QMP combo PHY.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
.../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 139 ++++++++++++++++++
1 file changed, 139 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
index 09b95f89e..09ca9a560 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -28,6 +28,7 @@ / {
aliases {
i2c4 = &i2c4;
+ i2c15 = &i2c15;
serial1 = &uart2;
};
@@ -216,6 +217,40 @@ map1 {
};
};
+ usb0-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_sbu_default>;
+
+ orientation-switch;
+
+ port {
+ usb0_sbu_mux: endpoint {
+ remote-endpoint = <&ucsi0_sbu>;
+ };
+ };
+ };
+
+ usb1-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_sbu_default>;
+
+ orientation-switch;
+
+ port {
+ usb1_sbu_mux: endpoint {
+ remote-endpoint = <&ucsi1_sbu>;
+ };
+ };
+ };
+
wcn6855-pmu {
compatible = "qcom,wcn6855-pmu";
@@ -584,6 +619,81 @@ touchscreen@4f {
};
+&i2c15 {
+ clock-frequency = <400000>;
+
+ pinctrl-0 = <&i2c15_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ embedded-controller@38 {
+ compatible = "huawei,sc8280xp-gaokun-ec", "huawei,gaokun-ec";
+ reg = <0x38>;
+
+ interrupts-extended = <&tlmm 107 IRQ_TYPE_LEVEL_LOW>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ucsi0_ss_in: endpoint {
+ remote-endpoint = <&usb_0_qmpphy_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ucsi0_sbu: endpoint {
+ remote-endpoint = <&usb0_sbu_mux>;
+ };
+ };
+ };
+ };
+
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ucsi1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ucsi1_sbu: endpoint {
+ remote-endpoint = <&usb1_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+};
+
&mdss0 {
status = "okay";
};
@@ -1025,6 +1135,10 @@ &usb_0_qmpphy_dp_in {
remote-endpoint = <&mdss0_dp0_out>;
};
+&usb_0_qmpphy_out {
+ remote-endpoint = <&ucsi0_ss_in>;
+};
+
&usb_1 {
status = "okay";
};
@@ -1054,6 +1168,10 @@ &usb_1_qmpphy_dp_in {
remote-endpoint = <&mdss0_dp1_out>;
};
+&usb_1_qmpphy_out {
+ remote-endpoint = <&ucsi1_ss_in>;
+};
+
&usb_2 {
status = "okay";
};
@@ -1177,6 +1295,13 @@ i2c4_default: i2c4-default-state {
bias-disable;
};
+ i2c15_default: i2c15-default-state {
+ pins = "gpio36", "gpio37";
+ function = "qup15";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
mode_pin_active: mode-pin-state {
pins = "gpio26";
function = "gpio";
@@ -1301,6 +1426,20 @@ tx-pins {
};
};
+ usb0_sbu_default: usb0-sbu-state {
+ pins = "gpio164";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ usb1_sbu_default: usb1-sbu-state {
+ pins = "gpio47";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
wcd_default: wcd-default-state {
reset-pins {
pins = "gpio106";
--
2.47.1
next prev parent reply other threads:[~2024-12-27 17:15 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-27 17:13 [PATCH 0/5] platform: arm64: Huawei Matebook E Go embedded controller Pengyu Luo
2024-12-27 17:13 ` [PATCH 1/5] dt-bindings: platform: Add Huawei Matebook E Go EC Pengyu Luo
2024-12-27 18:18 ` Rob Herring (Arm)
2024-12-28 9:54 ` Krzysztof Kozlowski
2024-12-28 10:50 ` Pengyu Luo
2024-12-29 9:50 ` Krzysztof Kozlowski
2024-12-29 10:12 ` Pengyu Luo
2024-12-30 7:28 ` Aiqun(Maria) Yu
2024-12-30 7:35 ` Krzysztof Kozlowski
2024-12-30 9:10 ` Aiqun(Maria) Yu
2024-12-30 8:00 ` Pengyu Luo
2025-01-01 5:57 ` Pengyu Luo
2024-12-27 17:13 ` [PATCH 2/5] platform: arm64: add Huawei Matebook E Go (sc8280xp) EC driver Pengyu Luo
2024-12-27 18:21 ` Maya Matuszczyk
2024-12-28 5:42 ` Pengyu Luo
2024-12-28 9:58 ` Krzysztof Kozlowski
2024-12-28 11:34 ` [PATCH 1/5] dt-bindings: platform: Add Huawei Matebook E Go EC Pengyu Luo
2024-12-29 4:08 ` Dmitry Baryshkov
2024-12-29 9:04 ` [PATCH 2/5] platform: arm64: add Huawei Matebook E Go (sc8280xp) EC driver Pengyu Luo
2024-12-29 9:44 ` Krzysztof Kozlowski
2024-12-29 9:43 ` [PATCH 1/5] dt-bindings: platform: Add Huawei Matebook E Go EC Krzysztof Kozlowski
2024-12-29 10:28 ` Pengyu Luo
2024-12-29 21:45 ` Krzysztof Kozlowski
2024-12-28 12:33 ` [PATCH 2/5] platform: arm64: add Huawei Matebook E Go (sc8280xp) EC driver Bryan O'Donoghue
2024-12-28 13:51 ` Pengyu Luo
2024-12-29 15:32 ` Ilpo Järvinen
2024-12-29 15:55 ` Pengyu Luo
2024-12-29 14:49 ` Markus Elfring
2024-12-30 9:04 ` Aiqun(Maria) Yu
2024-12-30 10:44 ` Pengyu Luo
2024-12-31 5:00 ` Aiqun(Maria) Yu
2024-12-31 7:44 ` Pengyu Luo
2024-12-31 11:09 ` Bryan O'Donoghue
2025-01-03 5:38 ` Dmitry Baryshkov
2025-01-03 7:19 ` Pengyu Luo
2025-01-01 11:27 ` Pengyu Luo
2024-12-27 17:13 ` [PATCH 3/5] usb: typec: ucsi: add Huawei Matebook E Go (sc8280xp) ucsi driver Pengyu Luo
2024-12-28 13:06 ` Bryan O'Donoghue
2024-12-28 14:38 ` Pengyu Luo
2024-12-29 14:51 ` Bryan O'Donoghue
2024-12-29 16:25 ` Pengyu Luo
2024-12-29 4:40 ` Dmitry Baryshkov
2024-12-29 9:05 ` Pengyu Luo
2025-01-06 3:33 ` Dmitry Baryshkov
2025-01-06 9:20 ` [PATCH 1/5] dt-bindings: platform: Add Huawei Matebook E Go EC Pengyu Luo
2025-01-06 9:22 ` [PATCH 3/5] usb: typec: ucsi: add Huawei Matebook E Go (sc8280xp) ucsi driver Pengyu Luo
2024-12-29 16:15 ` Markus Elfring
2024-12-27 17:13 ` [PATCH 4/5] power: supply: add Huawei Matebook E Go (sc8280xp) psy driver Pengyu Luo
2024-12-27 17:13 ` Pengyu Luo [this message]
2024-12-30 14:53 ` [PATCH 5/5] arm64: dts: qcom: gaokun3: Add Embedded Controller node Konrad Dybcio
2024-12-30 16:22 ` Pengyu Luo
-- strict thread matches above, loose matches on Subject: below --
2024-12-30 14:54 [PATCH v2 3/3] arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp) Konrad Dybcio
2024-12-30 16:22 ` [PATCH 5/5] arm64: dts: qcom: gaokun3: Add Embedded Controller node Pengyu Luo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241227171353.404432-6-mitltlatltl@gmail.com \
--to=mitltlatltl@gmail.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nikita@trvn.ru \
--cc=platform-driver-x86@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.