[PATCH 01/21] hw/char/imx_serial: Fix reset value of UFCR register

[Bernhard Beschow <shentey@gmail.com>]

The value of the UCFR register is respected when echoing characters to the
terminal, but its reset value is reserved. Fix the reset value to the one
documented in the datasheet.

While at it move the related attribute out of the section of unimplemented
registers since its value is actually respected.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
 include/hw/char/imx_serial.h | 2 +-
 hw/char/imx_serial.c         | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h
index 65f0e97c76..90ba3ff18c 100644
--- a/include/hw/char/imx_serial.h
+++ b/include/hw/char/imx_serial.h
@@ -109,13 +109,13 @@ struct IMXSerialState {
     uint32_t ucr1;
     uint32_t ucr2;
     uint32_t uts1;
+    uint32_t ufcr;
 
     /*
      * The registers below are implemented just so that the
      * guest OS sees what it has written
      */
     uint32_t onems;
-    uint32_t ufcr;
     uint32_t ubmr;
     uint32_t ubrc;
     uint32_t ucr3;
diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
index 7c353fde50..cb6761d40e 100644
--- a/hw/char/imx_serial.c
+++ b/hw/char/imx_serial.c
@@ -160,6 +160,7 @@ static void imx_serial_reset(IMXSerialState *s)
     s->ucr3 = 0x700;
     s->ubmr = 0;
     s->ubrc = 4;
+    s->ufcr = BIT(11) | BIT(0);
 
     fifo32_reset(&s->rx_fifo);
     timer_del(&s->ageing_timer);
-- 
2.48.1