[PATCH 6.6 00/43] 6.6.75-rc1 review

[PATCH 6.6 00/43] 6.6.75-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.6.75 release.
There are 43 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 01 Feb 2025 13:34:42 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.75-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.6.75-rc1

Jack Greiner <jack@emoss.org>
    Input: xpad - add support for wooting two he (arm)

Matheos Mattsson <matheos.mattsson@gmail.com>
    Input: xpad - add support for Nacon Evol-X Xbox One Controller

Leonardo Brondani Schenkel <leonardo@schenkel.net>
    Input: xpad - improve name of 8BitDo controller 2dc8:3106

Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
    Input: xpad - add QH Electronics VID/PID

Nilton Perim Neto <niltonperimneto@gmail.com>
    Input: xpad - add unofficial Xbox 360 wireless receiver clone

Mark Pearson <mpearson-lenovo@squebb.ca>
    Input: atkbd - map F23 key to support default copilot shortcut

Nicolas Nobelis <nicolas@nobelis.eu>
    Input: xpad - add support for Nacon Pro Compact

Lianqin Hu <hulianqin@vivo.com>
    ALSA: usb-audio: Add delay quirk for USB Audio Device

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"

Qasim Ijaz <qasdev00@gmail.com>
    USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()

Easwar Hariharan <eahariha@linux.microsoft.com>
    scsi: storvsc: Ratelimit warning logs to prevent VM denial of service

Ido Schimmel <idosch@nvidia.com>
    ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()

Luis Henriques (SUSE) <luis.henriques@linux.dev>
    ext4: fix access to uninitialised lock in fc replay path

Alex Williamson <alex.williamson@redhat.com>
    vfio/platform: check the bounds of read/write syscalls

Linus Torvalds <torvalds@linux-foundation.org>
    cachestat: fix page cache statistics permission checking

Jiri Kosina <jkosina@suse.com>
    Revert "HID: multitouch: Add support for lenovo Y9000P Touchpad"

Alexey Dobriyan <adobriyan@gmail.com>
    block: fix integer overflow in BLKSECDISCARD

Jamal Hadi Salim <jhs@mojatatu.com>
    net: sched: fix ets qdisc OOB Indexing

Paulo Alcantara <pc@manguebit.com>
    smb: client: handle lack of EA support in smb2_query_path_info()

Chuck Lever <chuck.lever@oracle.com>
    libfs: Use d_children list to iterate simple_offset directories

Chuck Lever <chuck.lever@oracle.com>
    libfs: Replace simple_offset end-of-directory detection

Chuck Lever <chuck.lever@oracle.com>
    Revert "libfs: Add simple_offset_empty()"

Chuck Lever <chuck.lever@oracle.com>
    libfs: Return ENOSPC when the directory offset range is exhausted

Chuck Lever <chuck.lever@oracle.com>
    shmem: Fix shmem_rename2()

Chuck Lever <chuck.lever@oracle.com>
    libfs: Add simple_offset_rename() API

Chuck Lever <chuck.lever@oracle.com>
    libfs: Fix simple_offset_rename_exchange()

Chuck Lever <chuck.lever@oracle.com>
    libfs: Add simple_offset_empty()

Chuck Lever <chuck.lever@oracle.com>
    libfs: Define a minimum directory offset

Chuck Lever <chuck.lever@oracle.com>
    libfs: Re-arrange locking in offset_iterate_dir()

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag

Selvin Xavier <selvin.xavier@broadcom.com>
    RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop

Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
    ipv6: Fix soft lockups in fib6_select_path under high next hop churn

Anastasia Belova <abelova@astralinux.ru>
    cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value

Igor Pylypiv <ipylypiv@google.com>
    ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf()

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: samsung: Add missing depends on I2C

Russell Harmon <russ@har.mn>
    hwmon: (drivetemp) Set scsi command timeout to 10s

Philippe Simons <simons.philippe@gmail.com>
    irqchip/sunxi-nmi: Add missing SKIP_WAKE flag

Rob Herring (Arm) <robh@kernel.org>
    of/unittest: Add test that of_address_to_resource() fails on non-translatable address

Tom Chung <chiahsuan.chung@amd.com>
    drm/amd/display: Use HW lock mgr for PSR1

Xiang Zhang <hawkxiang.cpp@gmail.com>
    scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request

Linus Walleij <linus.walleij@linaro.org>
    seccomp: Stub for !CONFIG_SECCOMP

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: samsung: Add missing selects for MFD_WM8994

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: wm8994: Add depends on MFD core


-------------

Diffstat:

 Makefile                                           |   4 +-
 block/ioctl.c                                      |   9 +-
 drivers/ata/libahci.c                              |  12 +-
 drivers/ata/libata-core.c                          |   8 +
 drivers/cpufreq/amd-pstate.c                       |   7 +-
 .../gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c  |   3 +-
 drivers/hid/hid-ids.h                              |   1 -
 drivers/hid/hid-multitouch.c                       |   8 +-
 drivers/hwmon/drivetemp.c                          |   2 +-
 drivers/infiniband/hw/bnxt_re/main.c               |  10 +
 drivers/input/joystick/xpad.c                      |   9 +-
 drivers/input/keyboard/atkbd.c                     |   2 +-
 drivers/irqchip/irq-sunxi-nmi.c                    |   3 +-
 drivers/of/unittest-data/tests-platform.dtsi       |  13 +
 drivers/of/unittest.c                              |  14 ++
 drivers/scsi/scsi_transport_iscsi.c                |   4 +-
 drivers/scsi/storvsc_drv.c                         |   8 +-
 drivers/usb/gadget/function/u_serial.c             |   8 +-
 drivers/usb/serial/quatech2.c                      |   2 +-
 drivers/vfio/platform/vfio_platform_common.c       |  10 +
 fs/ext4/super.c                                    |   3 +-
 fs/gfs2/file.c                                     |   1 +
 fs/libfs.c                                         | 177 ++++++++++----
 fs/smb/client/smb2inode.c                          | 104 +++++---
 include/linux/fs.h                                 |   2 +
 include/linux/seccomp.h                            |   2 +-
 mm/filemap.c                                       |  19 ++
 mm/shmem.c                                         |   3 +-
 net/ipv4/ip_tunnel.c                               |   2 +-
 net/ipv6/ip6_fib.c                                 |   8 +-
 net/ipv6/route.c                                   |  45 ++--
 net/sched/sch_ets.c                                |   2 +
 sound/soc/codecs/Kconfig                           |   1 +
 sound/soc/samsung/Kconfig                          |   6 +-
 sound/usb/quirks.c                                 |   2 +
 tools/testing/selftests/net/Makefile               |   1 +
 .../selftests/net/ipv6_route_update_soft_lockup.sh | 262 +++++++++++++++++++++
 37 files changed, 640 insertions(+), 137 deletions(-)

[PATCH 6.6 01/43] ASoC: wm8994: Add depends on MFD core

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 5ed01155cea69801f1f0c908954a56a5a3474bed ]

The ASoC driver should not be used without the MFD component. This was
causing randconfig issues with regmap IRQ which is selected by the MFD
part of the wm8994 driver.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501061337.R0DlBUoD-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250106154639.3999553-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index f1e1dbc509f6e..6d105a23c8284 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -2209,6 +2209,7 @@ config SND_SOC_WM8993
 
 config SND_SOC_WM8994
 	tristate
+	depends on MFD_WM8994
 
 config SND_SOC_WM8995
 	tristate
-- 
2.39.5

[PATCH 6.6 02/43] ASoC: samsung: Add missing selects for MFD_WM8994

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit fd55c6065bec5268740e944a1800e6fad00974d9 ]

Anything selecting SND_SOC_WM8994 should also select MFD_WM8994, as
SND_SOC_WM8994 does not automatically do so. Add the missing selects.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501071530.UwIXs7OL-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107104134.12147-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/samsung/Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 93c2b1b08d0a6..77d3beea1d715 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -127,8 +127,9 @@ config SND_SOC_SAMSUNG_TM2_WM5110
 
 config SND_SOC_SAMSUNG_ARIES_WM8994
 	tristate "SoC I2S Audio support for WM8994 on Aries"
-	depends on SND_SOC_SAMSUNG && MFD_WM8994 && IIO && EXTCON
+	depends on SND_SOC_SAMSUNG && IIO && EXTCON
 	select SND_SOC_BT_SCO
+	select MFD_WM8994
 	select SND_SOC_WM8994
 	select SND_SAMSUNG_I2S
 	help
@@ -142,6 +143,7 @@ config SND_SOC_SAMSUNG_MIDAS_WM1811
 	tristate "SoC I2S Audio support for Midas boards"
 	depends on SND_SOC_SAMSUNG
 	select SND_SAMSUNG_I2S
+	select MFD_WM8994
 	select SND_SOC_WM8994
 	help
 	  Say Y if you want to add support for SoC audio on the Midas boards.
-- 
2.39.5

[PATCH 6.6 03/43] seccomp: Stub for !CONFIG_SECCOMP

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit f90877dd7fb5085dd9abd6399daf63dd2969fc90 ]

When using !CONFIG_SECCOMP with CONFIG_GENERIC_ENTRY, the
randconfig bots found the following snag:

   kernel/entry/common.c: In function 'syscall_trace_enter':
>> kernel/entry/common.c:52:23: error: implicit declaration
   of function '__secure_computing' [-Wimplicit-function-declaration]
      52 |                 ret = __secure_computing(NULL);
         |                       ^~~~~~~~~~~~~~~~~~

Since generic entry calls __secure_computing() unconditionally,
fix this by moving the stub out of the ifdef clause for
CONFIG_HAVE_ARCH_SECCOMP_FILTER so it's always available.

Link: https://lore.kernel.org/oe-kbuild-all/202501061240.Fzk9qiFZ-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250108-seccomp-stub-2-v2-1-74523d49420f@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/seccomp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 175079552f68d..8cf31bb887198 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -70,10 +70,10 @@ struct seccomp_data;
 
 #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
 static inline int secure_computing(void) { return 0; }
-static inline int __secure_computing(const struct seccomp_data *sd) { return 0; }
 #else
 static inline void secure_computing_strict(int this_syscall) { return; }
 #endif
+static inline int __secure_computing(const struct seccomp_data *sd) { return 0; }
 
 static inline long prctl_get_seccomp(void)
 {
-- 
2.39.5

[PATCH 6.6 04/43] scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiang Zhang <hawkxiang.cpp@gmail.com>

[ Upstream commit 63ca02221cc5aa0731fe2b0cc28158aaa4b84982 ]

The ISCSI_UEVENT_GET_HOST_STATS request is already handled in
iscsi_get_host_stats(). This fix ensures that redundant responses are
skipped in iscsi_if_rx().

 - On success: send reply and stats from iscsi_get_host_stats()
   within if_recv_msg().

 - On error: fall through.

Signed-off-by: Xiang Zhang <hawkxiang.cpp@gmail.com>
Link: https://lore.kernel.org/r/20250107022432.65390-1-hawkxiang.cpp@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_iscsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 3075b2ddf7a69..deeb657981a69 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -4103,7 +4103,7 @@ iscsi_if_rx(struct sk_buff *skb)
 		}
 		do {
 			/*
-			 * special case for GET_STATS:
+			 * special case for GET_STATS, GET_CHAP and GET_HOST_STATS:
 			 * on success - sending reply and stats from
 			 * inside of if_recv_msg(),
 			 * on error - fall through.
@@ -4112,6 +4112,8 @@ iscsi_if_rx(struct sk_buff *skb)
 				break;
 			if (ev->type == ISCSI_UEVENT_GET_CHAP && !err)
 				break;
+			if (ev->type == ISCSI_UEVENT_GET_HOST_STATS && !err)
+				break;
 			err = iscsi_if_send_reply(portid, nlh->nlmsg_type,
 						  ev, sizeof(*ev));
 			if (err == -EAGAIN && --retries < 0) {
-- 
2.39.5

[PATCH 6.6 05/43] drm/amd/display: Use HW lock mgr for PSR1

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Chung <chiahsuan.chung@amd.com>

[ Upstream commit b5c764d6ed556c4e81fbe3fd976da77ec450c08e ]

[Why]
Without the dmub hw lock, it may cause the lock timeout issue
while do modeset on PSR1 eDP panel.

[How]
Allow dmub hw lock for PSR1.

Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2b5a9956269f4c1a09537177f18ab0229fe79f7)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c b/drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c
index 2aa0e01a6891b..f11b071a896f5 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dmub_hw_lock_mgr.c
@@ -63,7 +63,8 @@ void dmub_hw_lock_mgr_inbox0_cmd(struct dc_dmub_srv *dmub_srv,
 
 bool should_use_dmub_lock(struct dc_link *link)
 {
-	if (link->psr_settings.psr_version == DC_PSR_VERSION_SU_1)
+	if (link->psr_settings.psr_version == DC_PSR_VERSION_SU_1 ||
+	    link->psr_settings.psr_version == DC_PSR_VERSION_1)
 		return true;
 	return false;
 }
-- 
2.39.5

[PATCH 6.6 06/43] of/unittest: Add test that of_address_to_resource() fails on non-translatable address

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Herring (Arm) <robh@kernel.org>

[ Upstream commit 44748065ed321041db6e18cdcaa8c2a9554768ac ]

of_address_to_resource() on a non-translatable address should return an
error. Additionally, this case also triggers a spurious WARN for
missing #address-cells/#size-cells.

Link: https://lore.kernel.org/r/20250110215030.3637845-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/unittest-data/tests-platform.dtsi | 13 +++++++++++++
 drivers/of/unittest.c                        | 14 ++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/drivers/of/unittest-data/tests-platform.dtsi b/drivers/of/unittest-data/tests-platform.dtsi
index fa39611071b32..cd310b26b50c8 100644
--- a/drivers/of/unittest-data/tests-platform.dtsi
+++ b/drivers/of/unittest-data/tests-platform.dtsi
@@ -34,5 +34,18 @@ dev@100 {
 				};
 			};
 		};
+
+		platform-tests-2 {
+			// No #address-cells or #size-cells
+			node {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				test-device@100 {
+					compatible = "test-sub-device";
+					reg = <0x100 1>;
+				};
+			};
+		};
 	};
 };
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 7986113adc7d3..3b22c36bfb0b7 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1186,6 +1186,7 @@ static void __init of_unittest_bus_3cell_ranges(void)
 static void __init of_unittest_reg(void)
 {
 	struct device_node *np;
+	struct resource res;
 	int ret;
 	u64 addr, size;
 
@@ -1202,6 +1203,19 @@ static void __init of_unittest_reg(void)
 		np, addr);
 
 	of_node_put(np);
+
+	np = of_find_node_by_path("/testcase-data/platform-tests-2/node/test-device@100");
+	if (!np) {
+		pr_err("missing testcase data\n");
+		return;
+	}
+
+	ret = of_address_to_resource(np, 0, &res);
+	unittest(ret == -EINVAL, "of_address_to_resource(%pOF) expected error on untranslatable address\n",
+		 np);
+
+	of_node_put(np);
+
 }
 
 static void __init of_unittest_parse_interrupts(void)
-- 
2.39.5

[PATCH 6.6 07/43] irqchip/sunxi-nmi: Add missing SKIP_WAKE flag

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Philippe Simons <simons.philippe@gmail.com>

[ Upstream commit 3a748d483d80f066ca4b26abe45cdc0c367d13e9 ]

Some boards with Allwinner SoCs connect the PMIC's IRQ pin to the SoC's NMI
pin instead of a normal GPIO. Since the power key is connected to the PMIC,
and people expect to wake up a suspended system via this key, the NMI IRQ
controller must stay alive when the system goes into suspend.

Add the SKIP_WAKE flag to prevent the sunxi NMI controller from going to
sleep, so that the power key can wake up those systems.

[ tglx: Fixed up coding style ]

Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250112123402.388520-1-simons.philippe@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-sunxi-nmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-sunxi-nmi.c b/drivers/irqchip/irq-sunxi-nmi.c
index e760b1278143d..262b625c30c10 100644
--- a/drivers/irqchip/irq-sunxi-nmi.c
+++ b/drivers/irqchip/irq-sunxi-nmi.c
@@ -186,7 +186,8 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
 	gc->chip_types[0].chip.irq_unmask	= irq_gc_mask_set_bit;
 	gc->chip_types[0].chip.irq_eoi		= irq_gc_ack_set_bit;
 	gc->chip_types[0].chip.irq_set_type	= sunxi_sc_nmi_set_type;
-	gc->chip_types[0].chip.flags		= IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED;
+	gc->chip_types[0].chip.flags		= IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED |
+						  IRQCHIP_SKIP_SET_WAKE;
 	gc->chip_types[0].regs.ack		= reg_offs->pend;
 	gc->chip_types[0].regs.mask		= reg_offs->enable;
 	gc->chip_types[0].regs.type		= reg_offs->ctrl;
-- 
2.39.5

[PATCH 6.6 08/43] hwmon: (drivetemp) Set scsi command timeout to 10s

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell Harmon <russ@har.mn>

[ Upstream commit b46ba47d7bb461a0969317be1f2e165c0571d6c5 ]

There's at least one drive (MaxDigitalData OOS14000G) such that if it
receives a large amount of I/O while entering an idle power state will
first exit idle before responding, including causing SMART temperature
requests to be delayed.

This causes the drivetemp request to exceed its timeout of 1 second.

Signed-off-by: Russell Harmon <russ@har.mn>
Link: https://lore.kernel.org/r/20250115131340.3178988-1-russ@har.mn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/drivetemp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/drivetemp.c b/drivers/hwmon/drivetemp.c
index 2a4ec55ddb47e..291d91f686467 100644
--- a/drivers/hwmon/drivetemp.c
+++ b/drivers/hwmon/drivetemp.c
@@ -194,7 +194,7 @@ static int drivetemp_scsi_command(struct drivetemp_data *st,
 	scsi_cmd[14] = ata_command;
 
 	err = scsi_execute_cmd(st->sdev, scsi_cmd, op, st->smartdata,
-			       ATA_SECT_SIZE, HZ, 5, NULL);
+			       ATA_SECT_SIZE, 10 * HZ, 5, NULL);
 	if (err > 0)
 		err = -EIO;
 	return err;
-- 
2.39.5

[PATCH 6.6 09/43] ASoC: samsung: Add missing depends on I2C

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 704dbe97a68153a84319ad63f526e12ba868b88e ]

When switching to selects for MFD_WM8994 a dependency should have also
been added for I2C, as the dependency on MFD_WM8994 will not be
considered by the select.

Fixes: fd55c6065bec ("ASoC: samsung: Add missing selects for MFD_WM8994")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501082020.2bpGGVTW-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250108134828.246570-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/samsung/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 77d3beea1d715..e8716501685bc 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -127,7 +127,7 @@ config SND_SOC_SAMSUNG_TM2_WM5110
 
 config SND_SOC_SAMSUNG_ARIES_WM8994
 	tristate "SoC I2S Audio support for WM8994 on Aries"
-	depends on SND_SOC_SAMSUNG && IIO && EXTCON
+	depends on SND_SOC_SAMSUNG && I2C && IIO && EXTCON
 	select SND_SOC_BT_SCO
 	select MFD_WM8994
 	select SND_SOC_WM8994
@@ -141,7 +141,7 @@ config SND_SOC_SAMSUNG_ARIES_WM8994
 
 config SND_SOC_SAMSUNG_MIDAS_WM1811
 	tristate "SoC I2S Audio support for Midas boards"
-	depends on SND_SOC_SAMSUNG
+	depends on SND_SOC_SAMSUNG && I2C
 	select SND_SAMSUNG_I2S
 	select MFD_WM8994
 	select SND_SOC_WM8994
-- 
2.39.5

[PATCH 6.6 10/43] ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Igor Pylypiv <ipylypiv@google.com>

commit 18676c6aab0863618eb35443e7b8615eea3535a9 upstream.

ATA_QCFLAG_RTF_FILLED is not specific to ahci and can be used generally
to check if qc->result_tf contains valid data.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-7-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Cc: Christian Kühnke <christian@kuehnke.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/libahci.c     |   12 ++----------
 drivers/ata/libata-core.c |    8 ++++++++
 2 files changed, 10 insertions(+), 10 deletions(-)

--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2082,13 +2082,6 @@ static void ahci_qc_fill_rtf(struct ata_
 	struct ahci_port_priv *pp = qc->ap->private_data;
 	u8 *rx_fis = pp->rx_fis;
 
-	/*
-	 * rtf may already be filled (e.g. for successful NCQ commands).
-	 * If that is the case, we have nothing to do.
-	 */
-	if (qc->flags & ATA_QCFLAG_RTF_FILLED)
-		return;
-
 	if (pp->fbs_enabled)
 		rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
 
@@ -2102,7 +2095,6 @@ static void ahci_qc_fill_rtf(struct ata_
 	    !(qc->flags & ATA_QCFLAG_EH)) {
 		ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
 		qc->result_tf.status = (rx_fis + RX_FIS_PIO_SETUP)[15];
-		qc->flags |= ATA_QCFLAG_RTF_FILLED;
 		return;
 	}
 
@@ -2125,12 +2117,10 @@ static void ahci_qc_fill_rtf(struct ata_
 		 */
 		qc->result_tf.status = fis[2];
 		qc->result_tf.error = fis[3];
-		qc->flags |= ATA_QCFLAG_RTF_FILLED;
 		return;
 	}
 
 	ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
-	qc->flags |= ATA_QCFLAG_RTF_FILLED;
 }
 
 static void ahci_qc_ncq_fill_rtf(struct ata_port *ap, u64 done_mask)
@@ -2165,6 +2155,7 @@ static void ahci_qc_ncq_fill_rtf(struct
 			if (qc && ata_is_ncq(qc->tf.protocol)) {
 				qc->result_tf.status = status;
 				qc->result_tf.error = error;
+				qc->result_tf.flags = qc->tf.flags;
 				qc->flags |= ATA_QCFLAG_RTF_FILLED;
 			}
 			done_mask &= ~(1ULL << tag);
@@ -2189,6 +2180,7 @@ static void ahci_qc_ncq_fill_rtf(struct
 			fis += RX_FIS_SDB;
 			qc->result_tf.status = fis[2];
 			qc->result_tf.error = fis[3];
+			qc->result_tf.flags = qc->tf.flags;
 			qc->flags |= ATA_QCFLAG_RTF_FILLED;
 		}
 		done_mask &= ~(1ULL << tag);
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4792,8 +4792,16 @@ static void fill_result_tf(struct ata_qu
 {
 	struct ata_port *ap = qc->ap;
 
+	/*
+	 * rtf may already be filled (e.g. for successful NCQ commands).
+	 * If that is the case, we have nothing to do.
+	 */
+	if (qc->flags & ATA_QCFLAG_RTF_FILLED)
+		return;
+
 	qc->result_tf.flags = qc->tf.flags;
 	ap->ops->qc_fill_rtf(qc);
+	qc->flags |= ATA_QCFLAG_RTF_FILLED;
 }
 
 static void ata_verify_xfer(struct ata_queued_cmd *qc)

[PATCH 6.6 11/43] cpufreq: amd-pstate: add check for cpufreq_cpu_gets return value

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anastasia Belova <abelova@astralinux.ru>

commit 5493f9714e4cdaf0ee7cec15899a231400cb1a9f upstream.

cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return in case of error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ Raj: on 6.6, there don't have function amd_pstate_update_limits()
  so applied the NULL checking in amd_pstate_adjust_perf() only ]
Signed-off-by: Rajani Kantha <rajanikantha@engineer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/amd-pstate.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -579,8 +579,13 @@ static void amd_pstate_adjust_perf(unsig
 	unsigned long max_perf, min_perf, des_perf,
 		      cap_perf, lowest_nonlinear_perf, max_freq;
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-	struct amd_cpudata *cpudata = policy->driver_data;
 	unsigned int target_freq;
+	struct amd_cpudata *cpudata;
+
+	if (!policy)
+		return;
+
+	cpudata = policy->driver_data;
 
 	if (policy->min != cpudata->min_limit_freq || policy->max != cpudata->max_limit_freq)
 		amd_pstate_update_min_max_limit(policy);

[PATCH 6.6 12/43] ipv6: Fix soft lockups in fib6_select_path under high next hop churn

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>

commit d9ccb18f83ea2bb654289b6ecf014fd267cc988b upstream.

Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.

Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.

Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.

Kernel log:

 0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
 1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
 2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
 3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
 4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
 5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
 6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
 7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
 8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
    [exception RIP: fib6_select_path+299]
    RIP: ffffffff8ddafe7b  RSP: ffffbd13003d37b8  RFLAGS: 00000287
    RAX: ffff975850b43600  RBX: ffff975850b40200  RCX: 0000000000000000
    RDX: 000000003fffffff  RSI: 0000000051d383e4  RDI: ffff975850b43618
    RBP: ffffbd13003d3800   R8: 0000000000000000   R9: ffff975850b40200
    R10: 0000000000000000  R11: 0000000000000000  R12: ffffbd13003d3830
    R13: ffff975850b436a8  R14: ffff975850b43600  R15: 0000000000000007
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb

Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rajani Kantha <rajanikantha@engineer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_fib.c                                           |    8 
 net/ipv6/route.c                                             |   45 +
 tools/testing/selftests/net/Makefile                         |    1 
 tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh |  262 +++++++++++
 4 files changed, 297 insertions(+), 19 deletions(-)
 create mode 100755 tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh

--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1179,8 +1179,8 @@ next_iter:
 		while (sibling) {
 			if (sibling->fib6_metric == rt->fib6_metric &&
 			    rt6_qualify_for_ecmp(sibling)) {
-				list_add_tail(&rt->fib6_siblings,
-					      &sibling->fib6_siblings);
+				list_add_tail_rcu(&rt->fib6_siblings,
+						  &sibling->fib6_siblings);
 				break;
 			}
 			sibling = rcu_dereference_protected(sibling->fib6_next,
@@ -1241,7 +1241,7 @@ add:
 							 fib6_siblings)
 					sibling->fib6_nsiblings--;
 				rt->fib6_nsiblings = 0;
-				list_del_init(&rt->fib6_siblings);
+				list_del_rcu(&rt->fib6_siblings);
 				rt6_multipath_rebalance(next_sibling);
 				return err;
 			}
@@ -1954,7 +1954,7 @@ static void fib6_del_route(struct fib6_t
 					 &rt->fib6_siblings, fib6_siblings)
 			sibling->fib6_nsiblings--;
 		rt->fib6_nsiblings = 0;
-		list_del_init(&rt->fib6_siblings);
+		list_del_rcu(&rt->fib6_siblings);
 		rt6_multipath_rebalance(next_sibling);
 	}
 
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -418,8 +418,8 @@ void fib6_select_path(const struct net *
 		      struct flowi6 *fl6, int oif, bool have_oif_match,
 		      const struct sk_buff *skb, int strict)
 {
-	struct fib6_info *sibling, *next_sibling;
 	struct fib6_info *match = res->f6i;
+	struct fib6_info *sibling;
 
 	if (!match->nh && (!match->fib6_nsiblings || have_oif_match))
 		goto out;
@@ -445,8 +445,8 @@ void fib6_select_path(const struct net *
 	if (fl6->mp_hash <= atomic_read(&match->fib6_nh->fib_nh_upper_bound))
 		goto out;
 
-	list_for_each_entry_safe(sibling, next_sibling, &match->fib6_siblings,
-				 fib6_siblings) {
+	list_for_each_entry_rcu(sibling, &match->fib6_siblings,
+				fib6_siblings) {
 		const struct fib6_nh *nh = sibling->fib6_nh;
 		int nh_upper_bound;
 
@@ -5186,14 +5186,18 @@ static void ip6_route_mpath_notify(struc
 	 * nexthop. Since sibling routes are always added at the end of
 	 * the list, find the first sibling of the last route appended
 	 */
+	rcu_read_lock();
+
 	if ((nlflags & NLM_F_APPEND) && rt_last && rt_last->fib6_nsiblings) {
-		rt = list_first_entry(&rt_last->fib6_siblings,
-				      struct fib6_info,
-				      fib6_siblings);
+		rt = list_first_or_null_rcu(&rt_last->fib6_siblings,
+					    struct fib6_info,
+					    fib6_siblings);
 	}
 
 	if (rt)
 		inet6_rt_notify(RTM_NEWROUTE, rt, info, nlflags);
+
+	rcu_read_unlock();
 }
 
 static bool ip6_route_mpath_should_notify(const struct fib6_info *rt)
@@ -5538,17 +5542,21 @@ static size_t rt6_nlmsg_size(struct fib6
 		nexthop_for_each_fib6_nh(f6i->nh, rt6_nh_nlmsg_size,
 					 &nexthop_len);
 	} else {
-		struct fib6_info *sibling, *next_sibling;
 		struct fib6_nh *nh = f6i->fib6_nh;
+		struct fib6_info *sibling;
 
 		nexthop_len = 0;
 		if (f6i->fib6_nsiblings) {
 			rt6_nh_nlmsg_size(nh, &nexthop_len);
 
-			list_for_each_entry_safe(sibling, next_sibling,
-						 &f6i->fib6_siblings, fib6_siblings) {
+			rcu_read_lock();
+
+			list_for_each_entry_rcu(sibling, &f6i->fib6_siblings,
+						fib6_siblings) {
 				rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len);
 			}
+
+			rcu_read_unlock();
 		}
 		nexthop_len += lwtunnel_get_encap_size(nh->fib_nh_lws);
 	}
@@ -5712,7 +5720,7 @@ static int rt6_fill_node(struct net *net
 		    lwtunnel_fill_encap(skb, dst->lwtstate, RTA_ENCAP, RTA_ENCAP_TYPE) < 0)
 			goto nla_put_failure;
 	} else if (rt->fib6_nsiblings) {
-		struct fib6_info *sibling, *next_sibling;
+		struct fib6_info *sibling;
 		struct nlattr *mp;
 
 		mp = nla_nest_start_noflag(skb, RTA_MULTIPATH);
@@ -5724,14 +5732,21 @@ static int rt6_fill_node(struct net *net
 				    0) < 0)
 			goto nla_put_failure;
 
-		list_for_each_entry_safe(sibling, next_sibling,
-					 &rt->fib6_siblings, fib6_siblings) {
+		rcu_read_lock();
+
+		list_for_each_entry_rcu(sibling, &rt->fib6_siblings,
+					fib6_siblings) {
 			if (fib_add_nexthop(skb, &sibling->fib6_nh->nh_common,
 					    sibling->fib6_nh->fib_nh_weight,
-					    AF_INET6, 0) < 0)
+					    AF_INET6, 0) < 0) {
+				rcu_read_unlock();
+
 				goto nla_put_failure;
+			}
 		}
 
+		rcu_read_unlock();
+
 		nla_nest_end(skb, mp);
 	} else if (rt->nh) {
 		if (nla_put_u32(skb, RTA_NH_ID, rt->nh->id))
@@ -6168,7 +6183,7 @@ void inet6_rt_notify(int event, struct f
 	err = -ENOBUFS;
 	seq = info->nlh ? info->nlh->nlmsg_seq : 0;
 
-	skb = nlmsg_new(rt6_nlmsg_size(rt), gfp_any());
+	skb = nlmsg_new(rt6_nlmsg_size(rt), GFP_ATOMIC);
 	if (!skb)
 		goto errout;
 
@@ -6181,7 +6196,7 @@ void inet6_rt_notify(int event, struct f
 		goto errout;
 	}
 	rtnl_notify(skb, net, info->portid, RTNLGRP_IPV6_ROUTE,
-		    info->nlh, gfp_any());
+		    info->nlh, GFP_ATOMIC);
 	return;
 errout:
 	if (err < 0)
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -91,6 +91,7 @@ TEST_PROGS += test_vxlan_mdb.sh
 TEST_PROGS += test_bridge_neigh_suppress.sh
 TEST_PROGS += test_vxlan_nolocalbypass.sh
 TEST_PROGS += test_bridge_backup_port.sh
+TEST_PROGS += ipv6_route_update_soft_lockup.sh
 
 TEST_FILES := settings
 TEST_FILES += in_netns.sh lib.sh net_helper.sh setup_loopback.sh setup_veth.sh
--- /dev/null
+++ b/tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh
@@ -0,0 +1,262 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Testing for potential kernel soft lockup during IPv6 routing table
+# refresh under heavy outgoing IPv6 traffic. If a kernel soft lockup
+# occurs, a kernel panic will be triggered to prevent associated issues.
+#
+#
+#                            Test Environment Layout
+#
+# ┌----------------┐                                         ┌----------------┐
+# |     SOURCE_NS  |                                         |     SINK_NS    |
+# |    NAMESPACE   |                                         |    NAMESPACE   |
+# |(iperf3 clients)|                                         |(iperf3 servers)|
+# |                |                                         |                |
+# |                |                                         |                |
+# |    ┌-----------|                             nexthops    |---------┐      |
+# |    |veth_source|<--------------------------------------->|veth_sink|<┐    |
+# |    └-----------|2001:0DB8:1::0:1/96  2001:0DB8:1::1:1/96 |---------┘ |    |
+# |                |         ^           2001:0DB8:1::1:2/96 |           |    |
+# |                |         .                   .           |       fwd |    |
+# |  ┌---------┐   |         .                   .           |           |    |
+# |  |   IPv6  |   |         .                   .           |           V    |
+# |  | routing |   |         .           2001:0DB8:1::1:80/96|        ┌-----┐ |
+# |  |  table  |   |         .                               |        | lo  | |
+# |  | nexthop |   |         .                               └--------┴-----┴-┘
+# |  | update  |   |         ............................> 2001:0DB8:2::1:1/128
+# |  └-------- ┘   |
+# └----------------┘
+#
+# The test script sets up two network namespaces, source_ns and sink_ns,
+# connected via a veth link. Within source_ns, it continuously updates the
+# IPv6 routing table by flushing and inserting IPV6_NEXTHOP_ADDR_COUNT nexthop
+# IPs destined for SINK_LOOPBACK_IP_ADDR in sink_ns. This refresh occurs at a
+# rate of 1/ROUTING_TABLE_REFRESH_PERIOD per second for TEST_DURATION seconds.
+#
+# Simultaneously, multiple iperf3 clients within source_ns generate heavy
+# outgoing IPv6 traffic. Each client is assigned a unique port number starting
+# at 5000 and incrementing sequentially. Each client targets a unique iperf3
+# server running in sink_ns, connected to the SINK_LOOPBACK_IFACE interface
+# using the same port number.
+#
+# The number of iperf3 servers and clients is set to half of the total
+# available cores on each machine.
+#
+# NOTE: We have tested this script on machines with various CPU specifications,
+# ranging from lower to higher performance as listed below. The test script
+# effectively triggered a kernel soft lockup on machines running an unpatched
+# kernel in under a minute:
+#
+# - 1x Intel Xeon E-2278G 8-Core Processor @ 3.40GHz
+# - 1x Intel Xeon E-2378G Processor 8-Core @ 2.80GHz
+# - 1x AMD EPYC 7401P 24-Core Processor @ 2.00GHz
+# - 1x AMD EPYC 7402P 24-Core Processor @ 2.80GHz
+# - 2x Intel Xeon Gold 5120 14-Core Processor @ 2.20GHz
+# - 1x Ampere Altra Q80-30 80-Core Processor @ 3.00GHz
+# - 2x Intel Xeon Gold 5120 14-Core Processor @ 2.20GHz
+# - 2x Intel Xeon Silver 4214 24-Core Processor @ 2.20GHz
+# - 1x AMD EPYC 7502P 32-Core @ 2.50GHz
+# - 1x Intel Xeon Gold 6314U 32-Core Processor @ 2.30GHz
+# - 2x Intel Xeon Gold 6338 32-Core Processor @ 2.00GHz
+#
+# On less performant machines, you may need to increase the TEST_DURATION
+# parameter to enhance the likelihood of encountering a race condition leading
+# to a kernel soft lockup and avoid a false negative result.
+#
+# NOTE: The test may not produce the expected result in virtualized
+# environments (e.g., qemu) due to differences in timing and CPU handling,
+# which can affect the conditions needed to trigger a soft lockup.
+
+source lib.sh
+source net_helper.sh
+
+TEST_DURATION=300
+ROUTING_TABLE_REFRESH_PERIOD=0.01
+
+IPERF3_BITRATE="300m"
+
+
+IPV6_NEXTHOP_ADDR_COUNT="128"
+IPV6_NEXTHOP_ADDR_MASK="96"
+IPV6_NEXTHOP_PREFIX="2001:0DB8:1"
+
+
+SOURCE_TEST_IFACE="veth_source"
+SOURCE_TEST_IP_ADDR="2001:0DB8:1::0:1/96"
+
+SINK_TEST_IFACE="veth_sink"
+# ${SINK_TEST_IFACE} is populated with the following range of IPv6 addresses:
+# 2001:0DB8:1::1:1  to 2001:0DB8:1::1:${IPV6_NEXTHOP_ADDR_COUNT}
+SINK_LOOPBACK_IFACE="lo"
+SINK_LOOPBACK_IP_MASK="128"
+SINK_LOOPBACK_IP_ADDR="2001:0DB8:2::1:1"
+
+nexthop_ip_list=""
+termination_signal=""
+kernel_softlokup_panic_prev_val=""
+
+terminate_ns_processes_by_pattern() {
+	local ns=$1
+	local pattern=$2
+
+	for pid in $(ip netns pids ${ns}); do
+		[ -e /proc/$pid/cmdline ] && grep -qe "${pattern}" /proc/$pid/cmdline && kill -9 $pid
+	done
+}
+
+cleanup() {
+	echo "info: cleaning up namespaces and terminating all processes within them..."
+
+
+	# Terminate iperf3 instances running in the source_ns. To avoid race
+	# conditions, first iterate over the PIDs and terminate those
+	# associated with the bash shells running the
+	# `while true; do iperf3 -c ...; done` loops. In a second iteration,
+	# terminate the individual `iperf3 -c ...` instances.
+	terminate_ns_processes_by_pattern ${source_ns} while
+	terminate_ns_processes_by_pattern ${source_ns} iperf3
+
+	# Repeat the same process for sink_ns
+	terminate_ns_processes_by_pattern ${sink_ns} while
+	terminate_ns_processes_by_pattern ${sink_ns} iperf3
+
+	# Check if any iperf3 instances are still running. This could happen
+	# if a core has entered an infinite loop and the timeout for detecting
+	# the soft lockup has not expired, but either the test interval has
+	# already elapsed or the test was terminated manually (e.g., with ^C)
+	for pid in $(ip netns pids ${source_ns}); do
+		if [ -e /proc/$pid/cmdline ] && grep -qe 'iperf3' /proc/$pid/cmdline; then
+			echo "FAIL: unable to terminate some iperf3 instances. Soft lockup is underway. A kernel panic is on the way!"
+			exit ${ksft_fail}
+		fi
+	done
+
+	if [ "$termination_signal" == "SIGINT" ]; then
+		echo "SKIP: Termination due to ^C (SIGINT)"
+	elif [ "$termination_signal" == "SIGALRM" ]; then
+		echo "PASS: No kernel soft lockup occurred during this ${TEST_DURATION} second test"
+	fi
+
+	cleanup_ns ${source_ns} ${sink_ns}
+
+	sysctl -qw kernel.softlockup_panic=${kernel_softlokup_panic_prev_val}
+}
+
+setup_prepare() {
+	setup_ns source_ns sink_ns
+
+	ip -n ${source_ns} link add name ${SOURCE_TEST_IFACE} type veth peer name ${SINK_TEST_IFACE} netns ${sink_ns}
+
+	# Setting up the Source namespace
+	ip -n ${source_ns} addr add ${SOURCE_TEST_IP_ADDR} dev ${SOURCE_TEST_IFACE}
+	ip -n ${source_ns} link set dev ${SOURCE_TEST_IFACE} qlen 10000
+	ip -n ${source_ns} link set dev ${SOURCE_TEST_IFACE} up
+	ip netns exec ${source_ns} sysctl -qw net.ipv6.fib_multipath_hash_policy=1
+
+	# Setting up the Sink namespace
+	ip -n ${sink_ns} addr add ${SINK_LOOPBACK_IP_ADDR}/${SINK_LOOPBACK_IP_MASK} dev ${SINK_LOOPBACK_IFACE}
+	ip -n ${sink_ns} link set dev ${SINK_LOOPBACK_IFACE} up
+	ip netns exec ${sink_ns} sysctl -qw net.ipv6.conf.${SINK_LOOPBACK_IFACE}.forwarding=1
+
+	ip -n ${sink_ns} link set ${SINK_TEST_IFACE} up
+	ip netns exec ${sink_ns} sysctl -qw net.ipv6.conf.${SINK_TEST_IFACE}.forwarding=1
+
+
+	# Populate nexthop IPv6 addresses on the test interface in the sink_ns
+	echo "info: populating ${IPV6_NEXTHOP_ADDR_COUNT} IPv6 addresses on the ${SINK_TEST_IFACE} interface ..."
+	for IP in $(seq 1 ${IPV6_NEXTHOP_ADDR_COUNT}); do
+		ip -n ${sink_ns} addr add ${IPV6_NEXTHOP_PREFIX}::$(printf "1:%x" "${IP}")/${IPV6_NEXTHOP_ADDR_MASK} dev ${SINK_TEST_IFACE};
+	done
+
+	# Preparing list of nexthops
+	for IP in $(seq 1 ${IPV6_NEXTHOP_ADDR_COUNT}); do
+		nexthop_ip_list=$nexthop_ip_list" nexthop via ${IPV6_NEXTHOP_PREFIX}::$(printf "1:%x" $IP) dev ${SOURCE_TEST_IFACE} weight 1"
+	done
+}
+
+
+test_soft_lockup_during_routing_table_refresh() {
+	# Start num_of_iperf_servers iperf3 servers in the sink_ns namespace,
+	# each listening on ports starting at 5001 and incrementing
+	# sequentially. Since iperf3 instances may terminate unexpectedly, a
+	# while loop is used to automatically restart them in such cases.
+	echo "info: starting ${num_of_iperf_servers} iperf3 servers in the sink_ns namespace ..."
+	for i in $(seq 1 ${num_of_iperf_servers}); do
+		cmd="iperf3 --bind ${SINK_LOOPBACK_IP_ADDR} -s -p $(printf '5%03d' ${i}) --rcv-timeout 200 &>/dev/null"
+		ip netns exec ${sink_ns} bash -c "while true; do ${cmd}; done &" &>/dev/null
+	done
+
+	# Wait for the iperf3 servers to be ready
+	for i in $(seq ${num_of_iperf_servers}); do
+		port=$(printf '5%03d' ${i});
+		wait_local_port_listen ${sink_ns} ${port} tcp
+	done
+
+	# Continuously refresh the routing table in the background within
+	# the source_ns namespace
+	ip netns exec ${source_ns} bash -c "
+		while \$(ip netns list | grep -q ${source_ns}); do
+			ip -6 route add ${SINK_LOOPBACK_IP_ADDR}/${SINK_LOOPBACK_IP_MASK} ${nexthop_ip_list};
+			sleep ${ROUTING_TABLE_REFRESH_PERIOD};
+			ip -6 route delete ${SINK_LOOPBACK_IP_ADDR}/${SINK_LOOPBACK_IP_MASK};
+		done &"
+
+	# Start num_of_iperf_servers iperf3 clients in the source_ns namespace,
+	# each sending TCP traffic on sequential ports starting at 5001.
+	# Since iperf3 instances may terminate unexpectedly (e.g., if the route
+	# to the server is deleted in the background during a route refresh), a
+	# while loop is used to automatically restart them in such cases.
+	echo "info: starting ${num_of_iperf_servers} iperf3 clients in the source_ns namespace ..."
+	for i in $(seq 1 ${num_of_iperf_servers}); do
+		cmd="iperf3 -c ${SINK_LOOPBACK_IP_ADDR} -p $(printf '5%03d' ${i}) --length 64 --bitrate ${IPERF3_BITRATE} -t 0 --connect-timeout 150 &>/dev/null"
+		ip netns exec ${source_ns} bash -c "while true; do ${cmd}; done &" &>/dev/null
+	done
+
+	echo "info: IPv6 routing table is being updated at the rate of $(echo "1/${ROUTING_TABLE_REFRESH_PERIOD}" | bc)/s for ${TEST_DURATION} seconds ..."
+	echo "info: A kernel soft lockup, if detected, results in a kernel panic!"
+
+	wait
+}
+
+# Make sure 'iperf3' is installed, skip the test otherwise
+if [ ! -x "$(command -v "iperf3")" ]; then
+	echo "SKIP: 'iperf3' is not installed. Skipping the test."
+	exit ${ksft_skip}
+fi
+
+# Determine the number of cores on the machine
+num_of_iperf_servers=$(( $(nproc)/2 ))
+
+# Check if we are running on a multi-core machine, skip the test otherwise
+if [ "${num_of_iperf_servers}" -eq 0 ]; then
+	echo "SKIP: This test is not valid on a single core machine!"
+	exit ${ksft_skip}
+fi
+
+# Since the kernel soft lockup we're testing causes at least one core to enter
+# an infinite loop, destabilizing the host and likely affecting subsequent
+# tests, we trigger a kernel panic instead of reporting a failure and
+# continuing
+kernel_softlokup_panic_prev_val=$(sysctl -n kernel.softlockup_panic)
+sysctl -qw kernel.softlockup_panic=1
+
+handle_sigint() {
+	termination_signal="SIGINT"
+	cleanup
+	exit ${ksft_skip}
+}
+
+handle_sigalrm() {
+	termination_signal="SIGALRM"
+	cleanup
+	exit ${ksft_pass}
+}
+
+trap handle_sigint SIGINT
+trap handle_sigalrm SIGALRM
+
+(sleep ${TEST_DURATION} && kill -s SIGALRM $$)&
+
+setup_prepare
+test_soft_lockup_during_routing_table_refresh

[PATCH 6.6 13/43] RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Selvin Xavier <selvin.xavier@broadcom.com>

commit 8be3e5b0c96beeefe9d5486b96575d104d3e7d17 upstream.

Driver waits indefinitely for the fifo occupancy to go below a threshold
as soon as the pacing interrupt is received. This can cause soft lockup on
one of the processors, if the rate of DB is very high.

Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th
if the loop is taking more time. Pacing will be continuing until the
occupancy is below the threshold. This is ensured by the checks in
bnxt_re_pacing_timer_exp and further scheduling the work for pacing based
on the fifo occupancy.

Fixes: 2ad4e6303a6d ("RDMA/bnxt_re: Implement doorbell pacing algorithm")
Link: https://patch.msgid.link/r/1728373302-19530-7-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
[ Add the declaration of variable pacing_data to make it work on 6.6.y ]
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/bnxt_re/main.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -485,6 +485,8 @@ static void bnxt_re_set_default_pacing_d
 static void __wait_for_fifo_occupancy_below_th(struct bnxt_re_dev *rdev)
 {
 	u32 read_val, fifo_occup;
+	struct bnxt_qplib_db_pacing_data *pacing_data = rdev->qplib_res.pacing_data;
+	u32 retry_fifo_check = 1000;
 
 	/* loop shouldn't run infintely as the occupancy usually goes
 	 * below pacing algo threshold as soon as pacing kicks in.
@@ -500,6 +502,14 @@ static void __wait_for_fifo_occupancy_be
 
 		if (fifo_occup < rdev->qplib_res.pacing_data->pacing_th)
 			break;
+		if (!retry_fifo_check--) {
+			dev_info_once(rdev_to_dev(rdev),
+				      "%s: fifo_occup = 0x%xfifo_max_depth = 0x%x pacing_th = 0x%x\n",
+				      __func__, fifo_occup, pacing_data->fifo_max_depth,
+					pacing_data->pacing_th);
+			break;
+		}
+
 	}
 }
 

[PATCH 6.6 14/43] gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Gruenbacher <agruenba@redhat.com>

commit 7c9d9223802fbed4dee1ae301661bf346964c9d2 upstream.

Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag:
depending on that flag, the pages in the address space will either use
buffer heads or iomap_folio_state structs, and we cannot mix the two.

Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/gfs2/file.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -251,6 +251,7 @@ static int do_gfs2_set_flags(struct inod
 		error = filemap_fdatawait(inode->i_mapping);
 		if (error)
 			goto out;
+		truncate_inode_pages(inode->i_mapping, 0);
 		if (new_flags & GFS2_DIF_JDATA)
 			gfs2_ordered_del_inode(ip);
 	}

[PATCH 6.6 15/43] libfs: Re-arrange locking in offset_iterate_dir()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 3f6d810665dfde0d33785420618ceb03fba0619d ]

Liam and Matthew say that once the RCU read lock is released,
xa_state is not safe to re-use for the next xas_find() call. But the
RCU read lock must be released on each loop iteration so that
dput(), which might_sleep(), can be called safely.

Thus we are forced to walk the offset tree with fresh state for each
directory entry. xa_find() can do this for us, though it might be a
little less efficient than maintaining xa_state locally.

We believe that in the current code base, inode->i_rwsem provides
protection for the xa_state maintained in
offset_iterate_dir(). However, there is no guarantee that will
continue to be the case in the future.

Since offset_iterate_dir() doesn't build xa_state locally any more,
there's no longer a strong need for offset_find_next(). Clean up by
rolling these two helpers together.

Suggested-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Message-ID: <170785993027.11135.8830043889278631735.stgit@91.116.238.104.host.secureserver.net>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820142021.6328.15047865406275957018.stgit@91.116.238.104.host.secureserver.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -401,12 +401,13 @@ static loff_t offset_dir_llseek(struct f
 	return vfs_setpos(file, offset, U32_MAX);
 }
 
-static struct dentry *offset_find_next(struct xa_state *xas)
+static struct dentry *offset_find_next(struct offset_ctx *octx, loff_t offset)
 {
 	struct dentry *child, *found = NULL;
+	XA_STATE(xas, &octx->xa, offset);
 
 	rcu_read_lock();
-	child = xas_next_entry(xas, U32_MAX);
+	child = xas_next_entry(&xas, U32_MAX);
 	if (!child)
 		goto out;
 	spin_lock(&child->d_lock);
@@ -429,12 +430,11 @@ static bool offset_dir_emit(struct dir_c
 
 static void *offset_iterate_dir(struct inode *inode, struct dir_context *ctx)
 {
-	struct offset_ctx *so_ctx = inode->i_op->get_offset_ctx(inode);
-	XA_STATE(xas, &so_ctx->xa, ctx->pos);
+	struct offset_ctx *octx = inode->i_op->get_offset_ctx(inode);
 	struct dentry *dentry;
 
 	while (true) {
-		dentry = offset_find_next(&xas);
+		dentry = offset_find_next(octx, ctx->pos);
 		if (!dentry)
 			return ERR_PTR(-ENOENT);
 
@@ -443,8 +443,8 @@ static void *offset_iterate_dir(struct i
 			break;
 		}
 
+		ctx->pos = dentry2offset(dentry) + 1;
 		dput(dentry);
-		ctx->pos = xas.xa_index + 1;
 	}
 	return NULL;
 }

[PATCH 6.6 16/43] libfs: Define a minimum directory offset

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 7beea725a8ca412c6190090ce7c3a13b169592a1 ]

This value is used in several places, so make it a symbolic
constant.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820142741.6328.12428356024575347885.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: ecba88a3b32d ("libfs: Add simple_offset_empty()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -239,6 +239,11 @@ const struct inode_operations simple_dir
 };
 EXPORT_SYMBOL(simple_dir_inode_operations);
 
+/* 0 is '.', 1 is '..', so always start with offset 2 or more */
+enum {
+	DIR_OFFSET_MIN	= 2,
+};
+
 static void offset_set(struct dentry *dentry, u32 offset)
 {
 	dentry->d_fsdata = (void *)((uintptr_t)(offset));
@@ -260,9 +265,7 @@ void simple_offset_init(struct offset_ct
 {
 	xa_init_flags(&octx->xa, XA_FLAGS_ALLOC1);
 	lockdep_set_class(&octx->xa.xa_lock, &simple_offset_xa_lock);
-
-	/* 0 is '.', 1 is '..', so always start with offset 2 */
-	octx->next_offset = 2;
+	octx->next_offset = DIR_OFFSET_MIN;
 }
 
 /**
@@ -275,7 +278,7 @@ void simple_offset_init(struct offset_ct
  */
 int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry)
 {
-	static const struct xa_limit limit = XA_LIMIT(2, U32_MAX);
+	static const struct xa_limit limit = XA_LIMIT(DIR_OFFSET_MIN, U32_MAX);
 	u32 offset;
 	int ret;
 
@@ -480,7 +483,7 @@ static int offset_readdir(struct file *f
 		return 0;
 
 	/* In this case, ->private_data is protected by f_pos_lock */
-	if (ctx->pos == 2)
+	if (ctx->pos == DIR_OFFSET_MIN)
 		file->private_data = NULL;
 	else if (file->private_data == ERR_PTR(-ENOENT))
 		return 0;

[PATCH 6.6 17/43] libfs: Add simple_offset_empty()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit ecba88a3b32d733d41e27973e25b2bc580f64281 ]

For simple filesystems that use directory offset mapping, rely
strictly on the directory offset map to tell when a directory has
no children.

After this patch is applied, the emptiness test holds only the RCU
read lock when the directory being tested has no children.

In addition, this adds another layer of confirmation that
simple_offset_add/remove() are working as expected.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820143463.6328.7872919188371286951.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 5a1a25be995e ("libfs: Add simple_offset_rename() API")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c         |   32 ++++++++++++++++++++++++++++++++
 include/linux/fs.h |    1 +
 mm/shmem.c         |    4 ++--
 3 files changed, 35 insertions(+), 2 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -313,6 +313,38 @@ void simple_offset_remove(struct offset_
 }
 
 /**
+ * simple_offset_empty - Check if a dentry can be unlinked
+ * @dentry: dentry to be tested
+ *
+ * Returns 0 if @dentry is a non-empty directory; otherwise returns 1.
+ */
+int simple_offset_empty(struct dentry *dentry)
+{
+	struct inode *inode = d_inode(dentry);
+	struct offset_ctx *octx;
+	struct dentry *child;
+	unsigned long index;
+	int ret = 1;
+
+	if (!inode || !S_ISDIR(inode->i_mode))
+		return ret;
+
+	index = DIR_OFFSET_MIN;
+	octx = inode->i_op->get_offset_ctx(inode);
+	xa_for_each(&octx->xa, index, child) {
+		spin_lock(&child->d_lock);
+		if (simple_positive(child)) {
+			spin_unlock(&child->d_lock);
+			ret = 0;
+			break;
+		}
+		spin_unlock(&child->d_lock);
+	}
+
+	return ret;
+}
+
+/**
  * simple_offset_rename_exchange - exchange rename with directory offsets
  * @old_dir: parent of dentry being moved
  * @old_dentry: dentry being moved
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3197,6 +3197,7 @@ struct offset_ctx {
 void simple_offset_init(struct offset_ctx *octx);
 int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry);
 void simple_offset_remove(struct offset_ctx *octx, struct dentry *dentry);
+int simple_offset_empty(struct dentry *dentry);
 int simple_offset_rename_exchange(struct inode *old_dir,
 				  struct dentry *old_dentry,
 				  struct inode *new_dir,
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -3368,7 +3368,7 @@ static int shmem_unlink(struct inode *di
 
 static int shmem_rmdir(struct inode *dir, struct dentry *dentry)
 {
-	if (!simple_empty(dentry))
+	if (!simple_offset_empty(dentry))
 		return -ENOTEMPTY;
 
 	drop_nlink(d_inode(dentry));
@@ -3425,7 +3425,7 @@ static int shmem_rename2(struct mnt_idma
 		return simple_offset_rename_exchange(old_dir, old_dentry,
 						     new_dir, new_dentry);
 
-	if (!simple_empty(new_dentry))
+	if (!simple_offset_empty(new_dentry))
 		return -ENOTEMPTY;
 
 	if (flags & RENAME_WHITEOUT) {

[PATCH 6.6 18/43] libfs: Fix simple_offset_rename_exchange()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 23cdd0eed3f1fff3af323092b0b88945a7950d8e ]

User space expects the replacement (old) directory entry to have
the same directory offset after the rename.

Suggested-by: Christian Brauner <brauner@kernel.org>
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-2-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ cel: adjusted to apply to origin/linux-6.6.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c |   25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -294,6 +294,18 @@ int simple_offset_add(struct offset_ctx
 	return 0;
 }
 
+static int simple_offset_replace(struct offset_ctx *octx, struct dentry *dentry,
+				 long offset)
+{
+	void *ret;
+
+	ret = xa_store(&octx->xa, offset, dentry, GFP_KERNEL);
+	if (xa_is_err(ret))
+		return xa_err(ret);
+	offset_set(dentry, offset);
+	return 0;
+}
+
 /**
  * simple_offset_remove - Remove an entry to a directory's offset map
  * @octx: directory offset ctx to be updated
@@ -351,6 +363,9 @@ int simple_offset_empty(struct dentry *d
  * @new_dir: destination parent
  * @new_dentry: destination dentry
  *
+ * This API preserves the directory offset values. Caller provides
+ * appropriate serialization.
+ *
  * Returns zero on success. Otherwise a negative errno is returned and the
  * rename is rolled back.
  */
@@ -368,11 +383,11 @@ int simple_offset_rename_exchange(struct
 	simple_offset_remove(old_ctx, old_dentry);
 	simple_offset_remove(new_ctx, new_dentry);
 
-	ret = simple_offset_add(new_ctx, old_dentry);
+	ret = simple_offset_replace(new_ctx, old_dentry, new_index);
 	if (ret)
 		goto out_restore;
 
-	ret = simple_offset_add(old_ctx, new_dentry);
+	ret = simple_offset_replace(old_ctx, new_dentry, old_index);
 	if (ret) {
 		simple_offset_remove(new_ctx, old_dentry);
 		goto out_restore;
@@ -387,10 +402,8 @@ int simple_offset_rename_exchange(struct
 	return 0;
 
 out_restore:
-	offset_set(old_dentry, old_index);
-	xa_store(&old_ctx->xa, old_index, old_dentry, GFP_KERNEL);
-	offset_set(new_dentry, new_index);
-	xa_store(&new_ctx->xa, new_index, new_dentry, GFP_KERNEL);
+	(void)simple_offset_replace(old_ctx, old_dentry, old_index);
+	(void)simple_offset_replace(new_ctx, new_dentry, new_index);
 	return ret;
 }
 

[PATCH 6.6 19/43] libfs: Add simple_offset_rename() API

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 5a1a25be995e1014abd01600479915683e356f5c ]

I'm about to fix a tmpfs rename bug that requires the use of
internal simple_offset helpers that are not available in mm/shmem.c

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-3-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c         |   21 +++++++++++++++++++++
 include/linux/fs.h |    2 ++
 mm/shmem.c         |    3 +--
 3 files changed, 24 insertions(+), 2 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -357,6 +357,27 @@ int simple_offset_empty(struct dentry *d
 }
 
 /**
+ * simple_offset_rename - handle directory offsets for rename
+ * @old_dir: parent directory of source entry
+ * @old_dentry: dentry of source entry
+ * @new_dir: parent_directory of destination entry
+ * @new_dentry: dentry of destination
+ *
+ * Caller provides appropriate serialization.
+ *
+ * Returns zero on success, a negative errno value on failure.
+ */
+int simple_offset_rename(struct inode *old_dir, struct dentry *old_dentry,
+			 struct inode *new_dir, struct dentry *new_dentry)
+{
+	struct offset_ctx *old_ctx = old_dir->i_op->get_offset_ctx(old_dir);
+	struct offset_ctx *new_ctx = new_dir->i_op->get_offset_ctx(new_dir);
+
+	simple_offset_remove(old_ctx, old_dentry);
+	return simple_offset_add(new_ctx, old_dentry);
+}
+
+/**
  * simple_offset_rename_exchange - exchange rename with directory offsets
  * @old_dir: parent of dentry being moved
  * @old_dentry: dentry being moved
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3198,6 +3198,8 @@ void simple_offset_init(struct offset_ct
 int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry);
 void simple_offset_remove(struct offset_ctx *octx, struct dentry *dentry);
 int simple_offset_empty(struct dentry *dentry);
+int simple_offset_rename(struct inode *old_dir, struct dentry *old_dentry,
+			 struct inode *new_dir, struct dentry *new_dentry);
 int simple_offset_rename_exchange(struct inode *old_dir,
 				  struct dentry *old_dentry,
 				  struct inode *new_dir,
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -3434,8 +3434,7 @@ static int shmem_rename2(struct mnt_idma
 			return error;
 	}
 
-	simple_offset_remove(shmem_get_offset_ctx(old_dir), old_dentry);
-	error = simple_offset_add(shmem_get_offset_ctx(new_dir), old_dentry);
+	error = simple_offset_rename(old_dir, old_dentry, new_dir, new_dentry);
 	if (error)
 		return error;
 

[PATCH 6.6 20/43] shmem: Fix shmem_rename2()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit ad191eb6d6942bb835a0b20b647f7c53c1d99ca4 ]

When renaming onto an existing directory entry, user space expects
the replacement entry to have the same directory offset as the
original one.

Link: https://gitlab.alpinelinux.org/alpine/aports/-/issues/15966
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-4-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -365,6 +365,9 @@ int simple_offset_empty(struct dentry *d
  *
  * Caller provides appropriate serialization.
  *
+ * User space expects the directory offset value of the replaced
+ * (new) directory entry to be unchanged after a rename.
+ *
  * Returns zero on success, a negative errno value on failure.
  */
 int simple_offset_rename(struct inode *old_dir, struct dentry *old_dentry,
@@ -372,8 +375,14 @@ int simple_offset_rename(struct inode *o
 {
 	struct offset_ctx *old_ctx = old_dir->i_op->get_offset_ctx(old_dir);
 	struct offset_ctx *new_ctx = new_dir->i_op->get_offset_ctx(new_dir);
+	long new_offset = dentry2offset(new_dentry);
 
 	simple_offset_remove(old_ctx, old_dentry);
+
+	if (new_offset) {
+		offset_set(new_dentry, 0);
+		return simple_offset_replace(new_ctx, old_dentry, new_offset);
+	}
 	return simple_offset_add(new_ctx, old_dentry);
 }
 

[PATCH 6.6 21/43] libfs: Return ENOSPC when the directory offset range is exhausted

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 903dc9c43a155e0893280c7472d4a9a3a83d75a6 ]

Testing shows that the EBUSY error return from mtree_alloc_cyclic()
leaks into user space. The ERRORS section of "man creat(2)" says:

>	EBUSY	O_EXCL was specified in flags and pathname refers
>		to a block device that is in use by the system
>		(e.g., it is mounted).

ENOSPC is closer to what applications expect in this situation.

Note that the normal range of simple directory offset values is
2..2^63, so hitting this error is going to be rare to impossible.

Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets")
Cc: stable@vger.kernel.org # v6.9+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-2-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ cel: adjusted to apply to origin/linux-6.6.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -287,8 +287,8 @@ int simple_offset_add(struct offset_ctx
 
 	ret = xa_alloc_cyclic(&octx->xa, &offset, dentry, limit,
 			      &octx->next_offset, GFP_KERNEL);
-	if (ret < 0)
-		return ret;
+	if (unlikely(ret < 0))
+		return ret == -EBUSY ? -ENOSPC : ret;
 
 	offset_set(dentry, offset);
 	return 0;

[PATCH 6.6 22/43] Revert "libfs: Add simple_offset_empty()"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit d7bde4f27ceef3dc6d72010a20d4da23db835a32 ]

simple_empty() and simple_offset_empty() perform the same task.
The latter's use as a canary to find bugs has not found any new
issues. A subsequent patch will remove the use of the mtree for
iterating directory contents, so revert back to using a similar
mechanism for determining whether a directory is indeed empty.

Only one such mechanism is ever needed.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-3-cel@kernel.org
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ cel: adjusted to apply to origin/linux-6.6.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c         |   32 --------------------------------
 include/linux/fs.h |    1 -
 mm/shmem.c         |    4 ++--
 3 files changed, 2 insertions(+), 35 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -325,38 +325,6 @@ void simple_offset_remove(struct offset_
 }
 
 /**
- * simple_offset_empty - Check if a dentry can be unlinked
- * @dentry: dentry to be tested
- *
- * Returns 0 if @dentry is a non-empty directory; otherwise returns 1.
- */
-int simple_offset_empty(struct dentry *dentry)
-{
-	struct inode *inode = d_inode(dentry);
-	struct offset_ctx *octx;
-	struct dentry *child;
-	unsigned long index;
-	int ret = 1;
-
-	if (!inode || !S_ISDIR(inode->i_mode))
-		return ret;
-
-	index = DIR_OFFSET_MIN;
-	octx = inode->i_op->get_offset_ctx(inode);
-	xa_for_each(&octx->xa, index, child) {
-		spin_lock(&child->d_lock);
-		if (simple_positive(child)) {
-			spin_unlock(&child->d_lock);
-			ret = 0;
-			break;
-		}
-		spin_unlock(&child->d_lock);
-	}
-
-	return ret;
-}
-
-/**
  * simple_offset_rename - handle directory offsets for rename
  * @old_dir: parent directory of source entry
  * @old_dentry: dentry of source entry
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3197,7 +3197,6 @@ struct offset_ctx {
 void simple_offset_init(struct offset_ctx *octx);
 int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry);
 void simple_offset_remove(struct offset_ctx *octx, struct dentry *dentry);
-int simple_offset_empty(struct dentry *dentry);
 int simple_offset_rename(struct inode *old_dir, struct dentry *old_dentry,
 			 struct inode *new_dir, struct dentry *new_dentry);
 int simple_offset_rename_exchange(struct inode *old_dir,
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -3368,7 +3368,7 @@ static int shmem_unlink(struct inode *di
 
 static int shmem_rmdir(struct inode *dir, struct dentry *dentry)
 {
-	if (!simple_offset_empty(dentry))
+	if (!simple_empty(dentry))
 		return -ENOTEMPTY;
 
 	drop_nlink(d_inode(dentry));
@@ -3425,7 +3425,7 @@ static int shmem_rename2(struct mnt_idma
 		return simple_offset_rename_exchange(old_dir, old_dentry,
 						     new_dir, new_dentry);
 
-	if (!simple_offset_empty(new_dentry))
+	if (!simple_empty(new_dentry))
 		return -ENOTEMPTY;
 
 	if (flags & RENAME_WHITEOUT) {

[PATCH 6.6 23/43] libfs: Replace simple_offset end-of-directory detection

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 68a3a65003145644efcbb651e91db249ccd96281 ]

According to getdents(3), the d_off field in each returned directory
entry points to the next entry in the directory. The d_off field in
the last returned entry in the readdir buffer must contain a valid
offset value, but if it points to an actual directory entry, then
readdir/getdents can loop.

This patch introduces a specific fixed offset value that is placed
in the d_off field of the last entry in a directory. Some user space
applications assume that the EOD offset value is larger than the
offsets of real directory entries, so the largest valid offset value
is reserved for this purpose. This new value is never allocated by
simple_offset_add().

When ->iterate_dir() returns, getdents{64} inserts the ctx->pos
value into the d_off field of the last valid entry in the readdir
buffer. When it hits EOD, offset_readdir() sets ctx->pos to the EOD
offset value so the last entry is updated to point to the EOD marker.

When trying to read the entry at the EOD offset, offset_readdir()
terminates immediately.

It is worth noting that using a Maple tree for directory offset
value allocation does not guarantee a 63-bit range of values --
on platforms where "long" is a 32-bit type, the directory offset
value range is still 0..(2^31 - 1). For broad compatibility with
32-bit user space, the largest tmpfs directory cookie value is now
S32_MAX.

Fixes: 796432efab1e ("libfs: getdents() should return 0 after reaching EOD")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-5-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ cel: adjusted to apply to origin/linux-6.6.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c |   37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -239,9 +239,15 @@ const struct inode_operations simple_dir
 };
 EXPORT_SYMBOL(simple_dir_inode_operations);
 
-/* 0 is '.', 1 is '..', so always start with offset 2 or more */
+/* simple_offset_add() never assigns these to a dentry */
 enum {
-	DIR_OFFSET_MIN	= 2,
+	DIR_OFFSET_EOD		= S32_MAX,
+};
+
+/* simple_offset_add() allocation range */
+enum {
+	DIR_OFFSET_MIN		= 2,
+	DIR_OFFSET_MAX		= DIR_OFFSET_EOD - 1,
 };
 
 static void offset_set(struct dentry *dentry, u32 offset)
@@ -278,7 +284,8 @@ void simple_offset_init(struct offset_ct
  */
 int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry)
 {
-	static const struct xa_limit limit = XA_LIMIT(DIR_OFFSET_MIN, U32_MAX);
+	static const struct xa_limit limit = XA_LIMIT(DIR_OFFSET_MIN,
+						      DIR_OFFSET_MAX);
 	u32 offset;
 	int ret;
 
@@ -442,8 +449,6 @@ static loff_t offset_dir_llseek(struct f
 		return -EINVAL;
 	}
 
-	/* In this case, ->private_data is protected by f_pos_lock */
-	file->private_data = NULL;
 	return vfs_setpos(file, offset, U32_MAX);
 }
 
@@ -453,7 +458,7 @@ static struct dentry *offset_find_next(s
 	XA_STATE(xas, &octx->xa, offset);
 
 	rcu_read_lock();
-	child = xas_next_entry(&xas, U32_MAX);
+	child = xas_next_entry(&xas, DIR_OFFSET_MAX);
 	if (!child)
 		goto out;
 	spin_lock(&child->d_lock);
@@ -474,7 +479,7 @@ static bool offset_dir_emit(struct dir_c
 			  inode->i_ino, fs_umode_to_dtype(inode->i_mode));
 }
 
-static void *offset_iterate_dir(struct inode *inode, struct dir_context *ctx)
+static void offset_iterate_dir(struct inode *inode, struct dir_context *ctx)
 {
 	struct offset_ctx *octx = inode->i_op->get_offset_ctx(inode);
 	struct dentry *dentry;
@@ -482,7 +487,7 @@ static void *offset_iterate_dir(struct i
 	while (true) {
 		dentry = offset_find_next(octx, ctx->pos);
 		if (!dentry)
-			return ERR_PTR(-ENOENT);
+			goto out_eod;
 
 		if (!offset_dir_emit(ctx, dentry)) {
 			dput(dentry);
@@ -492,7 +497,10 @@ static void *offset_iterate_dir(struct i
 		ctx->pos = dentry2offset(dentry) + 1;
 		dput(dentry);
 	}
-	return NULL;
+	return;
+
+out_eod:
+	ctx->pos = DIR_OFFSET_EOD;
 }
 
 /**
@@ -512,6 +520,8 @@ static void *offset_iterate_dir(struct i
  *
  * On return, @ctx->pos contains an offset that will read the next entry
  * in this directory when offset_readdir() is called again with @ctx.
+ * Caller places this value in the d_off field of the last entry in the
+ * user's buffer.
  *
  * Return values:
  *   %0 - Complete
@@ -524,13 +534,8 @@ static int offset_readdir(struct file *f
 
 	if (!dir_emit_dots(file, ctx))
 		return 0;
-
-	/* In this case, ->private_data is protected by f_pos_lock */
-	if (ctx->pos == DIR_OFFSET_MIN)
-		file->private_data = NULL;
-	else if (file->private_data == ERR_PTR(-ENOENT))
-		return 0;
-	file->private_data = offset_iterate_dir(d_inode(dir), ctx);
+	if (ctx->pos != DIR_OFFSET_EOD)
+		offset_iterate_dir(d_inode(dir), ctx);
 	return 0;
 }
 

[PATCH 6.6 24/43] libfs: Use d_children list to iterate simple_offset directories

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit b9b588f22a0c049a14885399e27625635ae6ef91 ]

The mtree mechanism has been effective at creating directory offsets
that are stable over multiple opendir instances. However, it has not
been able to handle the subtleties of renames that are concurrent
with readdir.

Instead of using the mtree to emit entries in the order of their
offset values, use it only to map incoming ctx->pos to a starting
entry. Then use the directory's d_children list, which is already
maintained properly by the dcache, to find the next child to emit.

One of the sneaky things about this is that when the mtree-allocated
offset value wraps (which is very rare), looking up ctx->pos++ is
not going to find the next entry; it will return NULL. Instead, by
following the d_children list, the offset values can appear in any
order but all of the entries in the directory will be visited
eventually.

Note also that the readdir() is guaranteed to reach the tail of this
list. Entries are added only at the head of d_children, and readdir
walks from its current position in that list towards its tail.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-6-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ cel: adjusted to apply to origin/linux-6.6.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/libfs.c |   84 ++++++++++++++++++++++++++++++++++++++++++-------------------
 1 file changed, 59 insertions(+), 25 deletions(-)

--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -241,12 +241,13 @@ EXPORT_SYMBOL(simple_dir_inode_operation
 
 /* simple_offset_add() never assigns these to a dentry */
 enum {
+	DIR_OFFSET_FIRST	= 2,		/* Find first real entry */
 	DIR_OFFSET_EOD		= S32_MAX,
 };
 
 /* simple_offset_add() allocation range */
 enum {
-	DIR_OFFSET_MIN		= 2,
+	DIR_OFFSET_MIN		= DIR_OFFSET_FIRST + 1,
 	DIR_OFFSET_MAX		= DIR_OFFSET_EOD - 1,
 };
 
@@ -452,51 +453,84 @@ static loff_t offset_dir_llseek(struct f
 	return vfs_setpos(file, offset, U32_MAX);
 }
 
-static struct dentry *offset_find_next(struct offset_ctx *octx, loff_t offset)
+static struct dentry *find_positive_dentry(struct dentry *parent,
+					   struct dentry *dentry,
+					   bool next)
+{
+	struct dentry *found = NULL;
+
+	spin_lock(&parent->d_lock);
+	if (next)
+		dentry = list_next_entry(dentry, d_child);
+	else if (!dentry)
+		dentry = list_first_entry_or_null(&parent->d_subdirs,
+						  struct dentry, d_child);
+	for (; dentry && !list_entry_is_head(dentry, &parent->d_subdirs, d_child);
+	     dentry = list_next_entry(dentry, d_child)) {
+		if (!simple_positive(dentry))
+			continue;
+		spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
+		if (simple_positive(dentry))
+			found = dget_dlock(dentry);
+		spin_unlock(&dentry->d_lock);
+		if (likely(found))
+			break;
+	}
+	spin_unlock(&parent->d_lock);
+	return found;
+}
+
+static noinline_for_stack struct dentry *
+offset_dir_lookup(struct dentry *parent, loff_t offset)
 {
+	struct inode *inode = d_inode(parent);
+	struct offset_ctx *octx = inode->i_op->get_offset_ctx(inode);
 	struct dentry *child, *found = NULL;
+
 	XA_STATE(xas, &octx->xa, offset);
 
-	rcu_read_lock();
-	child = xas_next_entry(&xas, DIR_OFFSET_MAX);
-	if (!child)
-		goto out;
-	spin_lock(&child->d_lock);
-	if (simple_positive(child))
-		found = dget_dlock(child);
-	spin_unlock(&child->d_lock);
-out:
-	rcu_read_unlock();
+	if (offset == DIR_OFFSET_FIRST)
+		found = find_positive_dentry(parent, NULL, false);
+	else {
+		rcu_read_lock();
+		child = xas_next_entry(&xas, DIR_OFFSET_MAX);
+		found = find_positive_dentry(parent, child, false);
+		rcu_read_unlock();
+	}
 	return found;
 }
 
 static bool offset_dir_emit(struct dir_context *ctx, struct dentry *dentry)
 {
-	u32 offset = dentry2offset(dentry);
 	struct inode *inode = d_inode(dentry);
 
-	return ctx->actor(ctx, dentry->d_name.name, dentry->d_name.len, offset,
-			  inode->i_ino, fs_umode_to_dtype(inode->i_mode));
+	return dir_emit(ctx, dentry->d_name.name, dentry->d_name.len,
+			inode->i_ino, fs_umode_to_dtype(inode->i_mode));
 }
 
-static void offset_iterate_dir(struct inode *inode, struct dir_context *ctx)
+static void offset_iterate_dir(struct file *file, struct dir_context *ctx)
 {
-	struct offset_ctx *octx = inode->i_op->get_offset_ctx(inode);
+	struct dentry *dir = file->f_path.dentry;
 	struct dentry *dentry;
 
+	dentry = offset_dir_lookup(dir, ctx->pos);
+	if (!dentry)
+		goto out_eod;
 	while (true) {
-		dentry = offset_find_next(octx, ctx->pos);
-		if (!dentry)
-			goto out_eod;
+		struct dentry *next;
 
-		if (!offset_dir_emit(ctx, dentry)) {
-			dput(dentry);
+		ctx->pos = dentry2offset(dentry);
+		if (!offset_dir_emit(ctx, dentry))
 			break;
-		}
 
-		ctx->pos = dentry2offset(dentry) + 1;
+		next = find_positive_dentry(dir, dentry, true);
 		dput(dentry);
+
+		if (!next)
+			goto out_eod;
+		dentry = next;
 	}
+	dput(dentry);
 	return;
 
 out_eod:
@@ -535,7 +569,7 @@ static int offset_readdir(struct file *f
 	if (!dir_emit_dots(file, ctx))
 		return 0;
 	if (ctx->pos != DIR_OFFSET_EOD)
-		offset_iterate_dir(d_inode(dir), ctx);
+		offset_iterate_dir(file, ctx);
 	return 0;
 }
 

[PATCH 6.6 25/43] smb: client: handle lack of EA support in smb2_query_path_info()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paulo Alcantara <pc@manguebit.com>

commit 3681c74d342db75b0d641ba60de27bf73e16e66b upstream.

If the server doesn't support both EAs and reparse point in a file,
the SMB2_QUERY_INFO request will fail with either
STATUS_NO_EAS_ON_FILE or STATUS_EAS_NOT_SUPPORT in the compound chain,
so ignore it as long as reparse point isn't
IO_REPARSE_TAG_LX_(CHR|BLK), which would require the EAs to know about
major/minor numbers.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/client/smb2inode.c |   92 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 69 insertions(+), 23 deletions(-)

--- a/fs/smb/client/smb2inode.c
+++ b/fs/smb/client/smb2inode.c
@@ -176,27 +176,27 @@ static int smb2_compound_op(const unsign
 			    struct kvec *out_iov, int *out_buftype, struct dentry *dentry)
 {
 
-	struct reparse_data_buffer *rbuf;
+	struct smb2_query_info_rsp *qi_rsp = NULL;
 	struct smb2_compound_vars *vars = NULL;
-	struct kvec *rsp_iov, *iov;
-	struct smb_rqst *rqst;
-	int rc;
-	__le16 *utf16_path = NULL;
 	__u8 oplock = SMB2_OPLOCK_LEVEL_NONE;
-	struct cifs_fid fid;
+	struct cifs_open_info_data *idata;
 	struct cifs_ses *ses = tcon->ses;
+	struct reparse_data_buffer *rbuf;
 	struct TCP_Server_Info *server;
-	int num_rqst = 0, i;
 	int resp_buftype[MAX_COMPOUND];
-	struct smb2_query_info_rsp *qi_rsp = NULL;
-	struct cifs_open_info_data *idata;
+	int retries = 0, cur_sleep = 1;
+	__u8 delete_pending[8] = {1,};
+	struct kvec *rsp_iov, *iov;
 	struct inode *inode = NULL;
-	int flags = 0;
-	__u8 delete_pending[8] = {1, 0, 0, 0, 0, 0, 0, 0};
+	__le16 *utf16_path = NULL;
+	struct smb_rqst *rqst;
 	unsigned int size[2];
-	void *data[2];
+	struct cifs_fid fid;
+	int num_rqst = 0, i;
 	unsigned int len;
-	int retries = 0, cur_sleep = 1;
+	int tmp_rc, rc;
+	int flags = 0;
+	void *data[2];
 
 replay_again:
 	/* reinitialize for possible replay */
@@ -637,7 +637,14 @@ finished:
 		tcon->need_reconnect = true;
 	}
 
+	tmp_rc = rc;
 	for (i = 0; i < num_cmds; i++) {
+		char *buf = rsp_iov[i + i].iov_base;
+
+		if (buf && resp_buftype[i + 1] != CIFS_NO_BUFFER)
+			rc = server->ops->map_error(buf, false);
+		else
+			rc = tmp_rc;
 		switch (cmds[i]) {
 		case SMB2_OP_QUERY_INFO:
 			idata = in_iov[i].iov_base;
@@ -803,6 +810,7 @@ finished:
 		}
 	}
 	SMB2_close_free(&rqst[num_rqst]);
+	rc = tmp_rc;
 
 	num_cmds += 2;
 	if (out_iov && out_buftype) {
@@ -858,22 +866,52 @@ static int parse_create_response(struct
 	return rc;
 }
 
+/* Check only if SMB2_OP_QUERY_WSL_EA command failed in the compound chain */
+static bool ea_unsupported(int *cmds, int num_cmds,
+			   struct kvec *out_iov, int *out_buftype)
+{
+	int i;
+
+	if (cmds[num_cmds - 1] != SMB2_OP_QUERY_WSL_EA)
+		return false;
+
+	for (i = 1; i < num_cmds - 1; i++) {
+		struct smb2_hdr *hdr = out_iov[i].iov_base;
+
+		if (out_buftype[i] == CIFS_NO_BUFFER || !hdr ||
+		    hdr->Status != STATUS_SUCCESS)
+			return false;
+	}
+	return true;
+}
+
+static inline void free_rsp_iov(struct kvec *iovs, int *buftype, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		free_rsp_buf(buftype[i], iovs[i].iov_base);
+		memset(&iovs[i], 0, sizeof(*iovs));
+		buftype[i] = CIFS_NO_BUFFER;
+	}
+}
+
 int smb2_query_path_info(const unsigned int xid,
 			 struct cifs_tcon *tcon,
 			 struct cifs_sb_info *cifs_sb,
 			 const char *full_path,
 			 struct cifs_open_info_data *data)
 {
+	struct kvec in_iov[3], out_iov[5] = {};
+	struct cached_fid *cfid = NULL;
 	struct cifs_open_parms oparms;
-	__u32 create_options = 0;
 	struct cifsFileInfo *cfile;
-	struct cached_fid *cfid = NULL;
+	__u32 create_options = 0;
+	int out_buftype[5] = {};
 	struct smb2_hdr *hdr;
-	struct kvec in_iov[3], out_iov[3] = {};
-	int out_buftype[3] = {};
+	int num_cmds = 0;
 	int cmds[3];
 	bool islink;
-	int i, num_cmds = 0;
 	int rc, rc2;
 
 	data->adjust_tz = false;
@@ -943,14 +981,14 @@ int smb2_query_path_info(const unsigned
 		if (rc || !data->reparse_point)
 			goto out;
 
-		if (!tcon->posix_extensions)
-			cmds[num_cmds++] = SMB2_OP_QUERY_WSL_EA;
 		/*
 		 * Skip SMB2_OP_GET_REPARSE if symlink already parsed in create
 		 * response.
 		 */
 		if (data->reparse.tag != IO_REPARSE_TAG_SYMLINK)
 			cmds[num_cmds++] = SMB2_OP_GET_REPARSE;
+		if (!tcon->posix_extensions)
+			cmds[num_cmds++] = SMB2_OP_QUERY_WSL_EA;
 
 		oparms = CIFS_OPARMS(cifs_sb, tcon, full_path,
 				     FILE_READ_ATTRIBUTES |
@@ -958,9 +996,18 @@ int smb2_query_path_info(const unsigned
 				     FILE_OPEN, create_options |
 				     OPEN_REPARSE_POINT, ACL_NO_MODE);
 		cifs_get_readable_path(tcon, full_path, &cfile);
+		free_rsp_iov(out_iov, out_buftype, ARRAY_SIZE(out_iov));
 		rc = smb2_compound_op(xid, tcon, cifs_sb, full_path,
 				      &oparms, in_iov, cmds, num_cmds,
-				      cfile, NULL, NULL, NULL);
+				      cfile, out_iov, out_buftype, NULL);
+		if (rc && ea_unsupported(cmds, num_cmds,
+					 out_iov, out_buftype)) {
+			if (data->reparse.tag != IO_REPARSE_TAG_LX_BLK &&
+			    data->reparse.tag != IO_REPARSE_TAG_LX_CHR)
+				rc = 0;
+			else
+				rc = -EOPNOTSUPP;
+		}
 		break;
 	case -EREMOTE:
 		break;
@@ -978,8 +1025,7 @@ int smb2_query_path_info(const unsigned
 	}
 
 out:
-	for (i = 0; i < ARRAY_SIZE(out_buftype); i++)
-		free_rsp_buf(out_buftype[i], out_iov[i].iov_base);
+	free_rsp_iov(out_iov, out_buftype, ARRAY_SIZE(out_iov));
 	return rc;
 }
 

[PATCH 6.6 26/43] net: sched: fix ets qdisc OOB Indexing

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jamal Hadi Salim <jhs@mojatatu.com>

commit d62b04fca4340a0d468d7853bd66e511935a18cb upstream.

Haowei Yan <g1042620637@gmail.com> found that ets_class_from_arg() can
index an Out-Of-Bound class in ets_class_from_arg() when passed clid of
0. The overflow may cause local privilege escalation.

 [   18.852298] ------------[ cut here ]------------
 [   18.853271] UBSAN: array-index-out-of-bounds in net/sched/sch_ets.c:93:20
 [   18.853743] index 18446744073709551615 is out of range for type 'ets_class [16]'
 [   18.854254] CPU: 0 UID: 0 PID: 1275 Comm: poc Not tainted 6.12.6-dirty #17
 [   18.854821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
 [   18.856532] Call Trace:
 [   18.857441]  <TASK>
 [   18.858227]  dump_stack_lvl+0xc2/0xf0
 [   18.859607]  dump_stack+0x10/0x20
 [   18.860908]  __ubsan_handle_out_of_bounds+0xa7/0xf0
 [   18.864022]  ets_class_change+0x3d6/0x3f0
 [   18.864322]  tc_ctl_tclass+0x251/0x910
 [   18.864587]  ? lock_acquire+0x5e/0x140
 [   18.865113]  ? __mutex_lock+0x9c/0xe70
 [   18.866009]  ? __mutex_lock+0xa34/0xe70
 [   18.866401]  rtnetlink_rcv_msg+0x170/0x6f0
 [   18.866806]  ? __lock_acquire+0x578/0xc10
 [   18.867184]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
 [   18.867503]  netlink_rcv_skb+0x59/0x110
 [   18.867776]  rtnetlink_rcv+0x15/0x30
 [   18.868159]  netlink_unicast+0x1c3/0x2b0
 [   18.868440]  netlink_sendmsg+0x239/0x4b0
 [   18.868721]  ____sys_sendmsg+0x3e2/0x410
 [   18.869012]  ___sys_sendmsg+0x88/0xe0
 [   18.869276]  ? rseq_ip_fixup+0x198/0x260
 [   18.869563]  ? rseq_update_cpu_node_id+0x10a/0x190
 [   18.869900]  ? trace_hardirqs_off+0x5a/0xd0
 [   18.870196]  ? syscall_exit_to_user_mode+0xcc/0x220
 [   18.870547]  ? do_syscall_64+0x93/0x150
 [   18.870821]  ? __memcg_slab_free_hook+0x69/0x290
 [   18.871157]  __sys_sendmsg+0x69/0xd0
 [   18.871416]  __x64_sys_sendmsg+0x1d/0x30
 [   18.871699]  x64_sys_call+0x9e2/0x2670
 [   18.871979]  do_syscall_64+0x87/0x150
 [   18.873280]  ? do_syscall_64+0x93/0x150
 [   18.874742]  ? lock_release+0x7b/0x160
 [   18.876157]  ? do_user_addr_fault+0x5ce/0x8f0
 [   18.877833]  ? irqentry_exit_to_user_mode+0xc2/0x210
 [   18.879608]  ? irqentry_exit+0x77/0xb0
 [   18.879808]  ? clear_bhb_loop+0x15/0x70
 [   18.880023]  ? clear_bhb_loop+0x15/0x70
 [   18.880223]  ? clear_bhb_loop+0x15/0x70
 [   18.880426]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
 [   18.880683] RIP: 0033:0x44a957
 [   18.880851] Code: ff ff e8 fc 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 8974 24 10
 [   18.881766] RSP: 002b:00007ffcdd00fad8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 [   18.882149] RAX: ffffffffffffffda RBX: 00007ffcdd010db8 RCX: 000000000044a957
 [   18.882507] RDX: 0000000000000000 RSI: 00007ffcdd00fb70 RDI: 0000000000000003
 [   18.885037] RBP: 00007ffcdd010bc0 R08: 000000000703c770 R09: 000000000703c7c0
 [   18.887203] R10: 0000000000000080 R11: 0000000000000246 R12: 0000000000000001
 [   18.888026] R13: 00007ffcdd010da8 R14: 00000000004ca7d0 R15: 0000000000000001
 [   18.888395]  </TASK>
 [   18.888610] ---[ end trace ]---

Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Suggested-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250111145740.74755-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_ets.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/sched/sch_ets.c
+++ b/net/sched/sch_ets.c
@@ -91,6 +91,8 @@ ets_class_from_arg(struct Qdisc *sch, un
 {
 	struct ets_sched *q = qdisc_priv(sch);
 
+	if (arg == 0 || arg > q->nbands)
+		return NULL;
 	return &q->classes[arg - 1];
 }
 

[PATCH 6.6 27/43] block: fix integer overflow in BLKSECDISCARD

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Dobriyan <adobriyan@gmail.com>

commit 697ba0b6ec4ae04afb67d3911799b5e2043b4455 upstream.

I independently rediscovered

	commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155
	block: fix overflow in blk_ioctl_discard()

but for secure erase.

Same problem:

	uint64_t r[2] = {512, 18446744073709551104ULL};
	ioctl(fd, BLKSECDISCARD, r);

will enter near infinite loop inside blkdev_issue_secure_erase():

	a.out: attempt to access beyond end of device
	loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048
	bio_check_eod: 3286214 callbacks suppressed

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lore.kernel.org/r/9e64057f-650a-46d1-b9f7-34af391536ef@p183
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Rajani Kantha <rajanikantha@engineer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/ioctl.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -115,7 +115,7 @@ static int blk_ioctl_discard(struct bloc
 		return -EINVAL;
 
 	filemap_invalidate_lock(inode->i_mapping);
-	err = truncate_bdev_range(bdev, mode, start, start + len - 1);
+	err = truncate_bdev_range(bdev, mode, start, end - 1);
 	if (err)
 		goto fail;
 	err = blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL);
@@ -127,7 +127,7 @@ fail:
 static int blk_ioctl_secure_erase(struct block_device *bdev, blk_mode_t mode,
 		void __user *argp)
 {
-	uint64_t start, len;
+	uint64_t start, len, end;
 	uint64_t range[2];
 	int err;
 
@@ -142,11 +142,12 @@ static int blk_ioctl_secure_erase(struct
 	len = range[1];
 	if ((start & 511) || (len & 511))
 		return -EINVAL;
-	if (start + len > bdev_nr_bytes(bdev))
+	if (check_add_overflow(start, len, &end) ||
+	    end > bdev_nr_bytes(bdev))
 		return -EINVAL;
 
 	filemap_invalidate_lock(bdev->bd_inode->i_mapping);
-	err = truncate_bdev_range(bdev, mode, start, start + len - 1);
+	err = truncate_bdev_range(bdev, mode, start, end - 1);
 	if (!err)
 		err = blkdev_issue_secure_erase(bdev, start >> 9, len >> 9,
 						GFP_KERNEL);

[PATCH 6.6 28/43] Revert "HID: multitouch: Add support for lenovo Y9000P Touchpad"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Kosina <jkosina@suse.com>

commit 3d88ba86ba6f35a0467f25a88c38aa5639190d04 upstream.

This reverts commit 251efae73bd46b097deec4f9986d926813aed744.

Quoting Wang Yuli:

	"The 27C6:01E0 touchpad doesn't require the workaround and applying it
	would actually break functionality.

	The initial report came from a BBS forum, but we suspect the
	information provided by the forum user may be incorrect which could
	happen sometimes. [1]

	Further investigation showed that the Lenovo Y9000P 2024 doesn't even
	use a Goodix touchpad. [2]

	For the broader issue of 27c6:01e0 being unusable on some devices, it
	just need to address it with a libinput quirk.

	In conclusion, we should revert this commit, which is the best
	solution."

Reported-by: Ulrich Müller <ulm@gentoo.org>
Reported-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/all/uikt4wwpw@gentoo.org/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-ids.h        |    1 -
 drivers/hid/hid-multitouch.c |    8 ++------
 2 files changed, 2 insertions(+), 7 deletions(-)

--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -506,7 +506,6 @@
 #define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PIT_E100 0xe100
 
 #define I2C_VENDOR_ID_GOODIX		0x27c6
-#define I2C_DEVICE_ID_GOODIX_01E0	0x01e0
 #define I2C_DEVICE_ID_GOODIX_01E8	0x01e8
 #define I2C_DEVICE_ID_GOODIX_01E9	0x01e9
 #define I2C_DEVICE_ID_GOODIX_01F0	0x01f0
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1447,8 +1447,7 @@ static __u8 *mt_report_fixup(struct hid_
 {
 	if (hdev->vendor == I2C_VENDOR_ID_GOODIX &&
 	    (hdev->product == I2C_DEVICE_ID_GOODIX_01E8 ||
-	     hdev->product == I2C_DEVICE_ID_GOODIX_01E9 ||
-		 hdev->product == I2C_DEVICE_ID_GOODIX_01E0)) {
+	     hdev->product == I2C_DEVICE_ID_GOODIX_01E9)) {
 		if (rdesc[607] == 0x15) {
 			rdesc[607] = 0x25;
 			dev_info(
@@ -2073,10 +2072,7 @@ static const struct hid_device_id mt_dev
 		     I2C_DEVICE_ID_GOODIX_01E8) },
 	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU,
 	  HID_DEVICE(BUS_I2C, HID_GROUP_ANY, I2C_VENDOR_ID_GOODIX,
-		     I2C_DEVICE_ID_GOODIX_01E9) },
-	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU,
-	  HID_DEVICE(BUS_I2C, HID_GROUP_ANY, I2C_VENDOR_ID_GOODIX,
-		     I2C_DEVICE_ID_GOODIX_01E0) },
+		     I2C_DEVICE_ID_GOODIX_01E8) },
 
 	/* GoodTouch panels */
 	{ .driver_data = MT_CLS_NSMU,

[PATCH 6.6 29/43] cachestat: fix page cache statistics permission checking

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 5f537664e705b0bf8b7e329861f20128534f6a83 upstream.

When the 'cachestat()' system call was added in commit cf264e1329fb
("cachestat: implement cachestat syscall"), it was meant to be a much
more convenient (and performant) version of mincore() that didn't need
mapping things into the user virtual address space in order to work.

But it ended up missing the "check for writability or ownership" fix for
mincore(), done in commit 134fca9063ad ("mm/mincore.c: make mincore()
more conservative").

This just adds equivalent logic to 'cachestat()', modified for the file
context (rather than vma).

Reported-by: Sudheendra Raghav Neela <sneela@tugraz.at>
Fixes: cf264e1329fb ("cachestat: implement cachestat syscall")
Tested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/filemap.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -4271,6 +4271,20 @@ resched:
 }
 
 /*
+ * See mincore: reveal pagecache information only for files
+ * that the calling process has write access to, or could (if
+ * tried) open for writing.
+ */
+static inline bool can_do_cachestat(struct file *f)
+{
+	if (f->f_mode & FMODE_WRITE)
+		return true;
+	if (inode_owner_or_capable(file_mnt_idmap(f), file_inode(f)))
+		return true;
+	return file_permission(f, MAY_WRITE) == 0;
+}
+
+/*
  * The cachestat(2) system call.
  *
  * cachestat() returns the page cache statistics of a file in the
@@ -4329,6 +4343,11 @@ SYSCALL_DEFINE4(cachestat, unsigned int,
 		return -EOPNOTSUPP;
 	}
 
+	if (!can_do_cachestat(f.file)) {
+		fdput(f);
+		return -EPERM;
+	}
+
 	if (flags != 0) {
 		fdput(f);
 		return -EINVAL;

[PATCH 6.6 30/43] vfio/platform: check the bounds of read/write syscalls

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit ce9ff21ea89d191e477a02ad7eabf4f996b80a69 upstream.

count and offset are passed from user space and not checked, only
offset is capped to 40 bits, which can be used to read/write out of
bounds of the device.

Fixes: 6e3f26456009 (“vfio/platform: read and write support for the device fd”)
Cc: stable@vger.kernel.org
Reported-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vfio/platform/vfio_platform_common.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -388,6 +388,11 @@ static ssize_t vfio_platform_read_mmio(s
 {
 	unsigned int done = 0;
 
+	if (off >= reg->size)
+		return -EINVAL;
+
+	count = min_t(size_t, count, reg->size - off);
+
 	if (!reg->ioaddr) {
 		reg->ioaddr =
 			ioremap(reg->addr, reg->size);
@@ -467,6 +472,11 @@ static ssize_t vfio_platform_write_mmio(
 {
 	unsigned int done = 0;
 
+	if (off >= reg->size)
+		return -EINVAL;
+
+	count = min_t(size_t, count, reg->size - off);
+
 	if (!reg->ioaddr) {
 		reg->ioaddr =
 			ioremap(reg->addr, reg->size);

[PATCH 6.6 31/43] ext4: fix access to uninitialised lock in fc replay path

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luis Henriques (SUSE) <luis.henriques@linux.dev>

commit 23dfdb56581ad92a9967bcd720c8c23356af74c1 upstream.

The following kernel trace can be triggered with fstest generic/629 when
executed against a filesystem with fast-commit feature enabled:

INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x66/0x90
 register_lock_class+0x759/0x7d0
 __lock_acquire+0x85/0x2630
 ? __find_get_block+0xb4/0x380
 lock_acquire+0xd1/0x2d0
 ? __ext4_journal_get_write_access+0xd5/0x160
 _raw_spin_lock+0x33/0x40
 ? __ext4_journal_get_write_access+0xd5/0x160
 __ext4_journal_get_write_access+0xd5/0x160
 ext4_reserve_inode_write+0x61/0xb0
 __ext4_mark_inode_dirty+0x79/0x270
 ? ext4_ext_replay_set_iblocks+0x2f8/0x450
 ext4_ext_replay_set_iblocks+0x330/0x450
 ext4_fc_replay+0x14c8/0x1540
 ? jread+0x88/0x2e0
 ? rcu_is_watching+0x11/0x40
 do_one_pass+0x447/0xd00
 jbd2_journal_recover+0x139/0x1b0
 jbd2_journal_load+0x96/0x390
 ext4_load_and_init_journal+0x253/0xd40
 ext4_fill_super+0x2cc6/0x3180
...

In the replay path there's an attempt to lock sbi->s_bdev_wb_lock in
function ext4_check_bdev_write_error().  Unfortunately, at this point this
spinlock has not been initialized yet.  Moving it's initialization to an
earlier point in __ext4_fill_super() fixes this splat.

Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Link: https://patch.msgid.link/20240718094356.7863-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Bruno VERNAY <bruno.vernay@se.com>
Signed-off-by: Victor Giraud <vgiraud.opensource@witekio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/super.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5366,6 +5366,8 @@ static int __ext4_fill_super(struct fs_c
 	INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */
 	mutex_init(&sbi->s_orphan_lock);
 
+	spin_lock_init(&sbi->s_bdev_wb_lock);
+
 	ext4_fast_commit_init(sb);
 
 	sb->s_root = NULL;
@@ -5586,7 +5588,6 @@ static int __ext4_fill_super(struct fs_c
 	 * Save the original bdev mapping's wb_err value which could be
 	 * used to detect the metadata async write error.
 	 */
-	spin_lock_init(&sbi->s_bdev_wb_lock);
 	errseq_check_and_advance(&sb->s_bdev->bd_inode->i_mapping->wb_err,
 				 &sbi->s_bdev_wb_err);
 	EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS;

[PATCH 6.6 32/43] ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <idosch@nvidia.com>

commit 90e0569dd3d32f4f4d2ca691d3fa5a8a14a13c12 upstream.

The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.

Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].

[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
 #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60

stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 <TASK>
 dump_stack_lvl+0xba/0x110
 lockdep_rcu_suspicious.cold+0x4f/0xd6
 ip_tunnel_find+0x435/0x4d0
 ip_tunnel_newlink+0x517/0x7a0
 ipgre_newlink+0x14c/0x170
 __rtnl_newlink+0x1173/0x19c0
 rtnl_newlink+0x6c/0xa0
 rtnetlink_rcv_msg+0x3cc/0xf60
 netlink_rcv_skb+0x171/0x450
 netlink_unicast+0x539/0x7f0
 netlink_sendmsg+0x8c1/0xd80
 ____sys_sendmsg+0x8f9/0xc20
 ___sys_sendmsg+0x197/0x1e0
 __sys_sendmsg+0x122/0x1f0
 do_syscall_64+0xbb/0x1d0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241023123009.749764-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_tunnel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -218,7 +218,7 @@ static struct ip_tunnel *ip_tunnel_find(
 	struct ip_tunnel *t = NULL;
 	struct hlist_head *head = ip_bucket(itn, parms);
 
-	hlist_for_each_entry_rcu(t, head, hash_node) {
+	hlist_for_each_entry_rcu(t, head, hash_node, lockdep_rtnl_is_held()) {
 		if (local == t->parms.iph.saddr &&
 		    remote == t->parms.iph.daddr &&
 		    link == READ_ONCE(t->parms.link) &&

[PATCH 6.6 33/43] scsi: storvsc: Ratelimit warning logs to prevent VM denial of service

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Easwar Hariharan <eahariha@linux.microsoft.com>

commit d2138eab8cde61e0e6f62d0713e45202e8457d6d upstream.

If there's a persistent error in the hypervisor, the SCSI warning for
failed I/O can flood the kernel log and max out CPU utilization,
preventing troubleshooting from the VM side. Ratelimit the warning so
it doesn't DoS the VM.

Closes: https://github.com/microsoft/WSL/issues/9173
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250107-eahariha-ratelimit-storvsc-v1-1-7fc193d1f2b0@linux.microsoft.com
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/storvsc_drv.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -171,6 +171,12 @@ do {								\
 		dev_warn(&(dev)->device, fmt, ##__VA_ARGS__);	\
 } while (0)
 
+#define storvsc_log_ratelimited(dev, level, fmt, ...)				\
+do {										\
+	if (do_logging(level))							\
+		dev_warn_ratelimited(&(dev)->device, fmt, ##__VA_ARGS__);	\
+} while (0)
+
 struct vmscsi_request {
 	u16 length;
 	u8 srb_status;
@@ -1177,7 +1183,7 @@ static void storvsc_on_io_completion(str
 		int loglevel = (stor_pkt->vm_srb.cdb[0] == TEST_UNIT_READY) ?
 			STORVSC_LOGGING_WARN : STORVSC_LOGGING_ERROR;
 
-		storvsc_log(device, loglevel,
+		storvsc_log_ratelimited(device, loglevel,
 			"tag#%d cmd 0x%x status: scsi 0x%x srb 0x%x hv 0x%x\n",
 			scsi_cmd_to_rq(request->cmd)->tag,
 			stor_pkt->vm_srb.cdb[0],

[PATCH 6.6 34/43] USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qasim Ijaz <qasdev00@gmail.com>

commit 575a5adf48b06a2980c9eeffedf699ed5534fade upstream.

This patch addresses a null-ptr-deref in qt2_process_read_urb() due to
an incorrect bounds check in the following:

       if (newport > serial->num_ports) {
               dev_err(&port->dev,
                       "%s - port change to invalid port: %i\n",
                       __func__, newport);
               break;
       }

The condition doesn't account for the valid range of the serial->port
buffer, which is from 0 to serial->num_ports - 1. When newport is equal
to serial->num_ports, the assignment of "port" in the
following code is out-of-bounds and NULL:

       serial_priv->current_port = newport;
       port = serial->port[serial_priv->current_port];

The fix checks if newport is greater than or equal to serial->num_ports
indicating it is out-of-bounds.

Reported-by: syzbot <syzbot+506479ebf12fe435d01a@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=506479ebf12fe435d01a
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: <stable@vger.kernel.org>      # 3.5
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/quatech2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -503,7 +503,7 @@ static void qt2_process_read_urb(struct
 
 				newport = *(ch + 3);
 
-				if (newport > serial->num_ports) {
+				if (newport >= serial->num_ports) {
 					dev_err(&port->dev,
 						"%s - port change to invalid port: %i\n",
 						__func__, newport);

[PATCH 6.6 35/43] Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 086fd062bc3883ae1ce4166cff5355db315ad879 upstream.

This reverts commit 13014969cbf07f18d62ceea40bd8ca8ec9d36cec.

It is reported to cause crashes on Tegra systems, so revert it for now.

Link: https://lore.kernel.org/r/1037c1ad-9230-4181-b9c3-167dbaa47644@nvidia.com
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable <stable@kernel.org>
Cc: Lianqin Hu <hulianqin@vivo.com>
Link: https://lore.kernel.org/r/2025011711-yippee-fever-a737@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/u_serial.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -1398,10 +1398,6 @@ void gserial_disconnect(struct gserial *
 	/* REVISIT as above: how best to track this? */
 	port->port_line_coding = gser->port_line_coding;
 
-	/* disable endpoints, aborting down any active I/O */
-	usb_ep_disable(gser->out);
-	usb_ep_disable(gser->in);
-
 	port->port_usb = NULL;
 	gser->ioport = NULL;
 	if (port->port.count > 0) {
@@ -1413,6 +1409,10 @@ void gserial_disconnect(struct gserial *
 	spin_unlock(&port->port_lock);
 	spin_unlock_irqrestore(&serial_port_lock, flags);
 
+	/* disable endpoints, aborting down any active I/O */
+	usb_ep_disable(gser->out);
+	usb_ep_disable(gser->in);
+
 	/* finally, free any unused/unusable I/O buffers */
 	spin_lock_irqsave(&port->port_lock, flags);
 	if (port->port.count == 0)

[PATCH 6.6 36/43] ALSA: usb-audio: Add delay quirk for USB Audio Device

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lianqin Hu <hulianqin@vivo.com>

commit ad5b205f9e022b407d91f952faddd05718be2866 upstream.

Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.

usb 1-1: New USB device found, idVendor=0d8c, idProduct=0014
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Audio Device
usb 1-1: Manufacturer: C-Media Electronics Inc.

Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217E94D922B9BF422A73F32D2192@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -2139,6 +2139,8 @@ static const struct usb_audio_quirk_flag
 		   QUIRK_FLAG_CTL_MSG_DELAY_1M),
 	DEVICE_FLG(0x0c45, 0x6340, /* Sonix HD USB Camera */
 		   QUIRK_FLAG_GET_SAMPLE_RATE),
+	DEVICE_FLG(0x0d8c, 0x0014, /* USB Audio Device */
+		   QUIRK_FLAG_CTL_MSG_DELAY_1M),
 	DEVICE_FLG(0x0ecb, 0x205c, /* JBL Quantum610 Wireless */
 		   QUIRK_FLAG_FIXED_RATE),
 	DEVICE_FLG(0x0ecb, 0x2069, /* JBL Quantum810 Wireless */

[PATCH 6.6 37/43] Input: xpad - add support for Nacon Pro Compact

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Nobelis <nicolas@nobelis.eu>

commit 1bba29603a2812e7b3dbb4ec1558ecb626ee933e upstream.

Add Nacon Pro Compact to the list of supported devices. These are the
ids of the "Colorlight" variant. The buttons, sticks and vibrations
work. The decorative LEDs on the other hand do not (they stay turned
off).

Signed-off-by: Nicolas Nobelis <nicolas@nobelis.eu>
Link: https://lore.kernel.org/r/20241116182419.33833-1-nicolas@nobelis.eu
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -382,6 +382,7 @@ static const struct xpad_device {
 	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
+	{ 0x3285, 0x0646, "Nacon Pro Compact", 0, XTYPE_XBOXONE },
 	{ 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },

[PATCH 6.6 38/43] Input: atkbd - map F23 key to support default copilot shortcut

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Pearson <mpearson-lenovo@squebb.ca>

commit 907bc9268a5a9f823ffa751957a5c1dd59f83f42 upstream.

Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.

Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.

MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/keyboard/atkbd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -89,7 +89,7 @@ static const unsigned short atkbd_set2_k
 	  0, 46, 45, 32, 18,  5,  4, 95,  0, 57, 47, 33, 20, 19,  6,183,
 	  0, 49, 48, 35, 34, 21,  7,184,  0,  0, 50, 36, 22,  8,  9,185,
 	  0, 51, 37, 23, 24, 11, 10,  0,  0, 52, 53, 38, 39, 25, 12,  0,
-	  0, 89, 40,  0, 26, 13,  0,  0, 58, 54, 28, 27,  0, 43,  0, 85,
+	  0, 89, 40,  0, 26, 13,  0,193, 58, 54, 28, 27,  0, 43,  0, 85,
 	  0, 86, 91, 90, 92,  0, 14, 94,  0, 79,124, 75, 71,121,  0,  0,
 	 82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
 

[PATCH 6.6 39/43] Input: xpad - add unofficial Xbox 360 wireless receiver clone

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nilton Perim Neto <niltonperimneto@gmail.com>

commit e4940fe6322c851659c17852b671c6e7b1aa9f56 upstream.

Although it mimics the Microsoft's VendorID, it is in fact a clone.
Taking into account that the original Microsoft Receiver is not being
manufactured anymore, this drive can solve dpad issues encontered by
those who still use the original 360 Wireless controller
but are using a receiver clone.

Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-12-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -150,6 +150,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
+	{ 0x045e, 0x02a9, "Xbox 360 Wireless Receiver (Unofficial)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", MAP_PADDLES, XTYPE_XBOXONE },

[PATCH 6.6 40/43] Input: xpad - add QH Electronics VID/PID

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>

commit 92600f3295ff571890c981d886c6544030cc05f3 upstream.

Add support for QH Electronics Xbox 360-compatible controller

Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250116012518.3476735-1-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -306,6 +306,7 @@ static const struct xpad_device {
 	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
 	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
+	{ 0x1a86, 0xe310, "QH Electronics Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -515,6 +516,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
 	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
+	XPAD_XBOX360_VENDOR(0x1a86),		/* QH Electronics */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */
 	XPAD_XBOXONE_VENDOR(0x20d6),		/* PowerA controllers */

[PATCH 6.6 41/43] Input: xpad - improve name of 8BitDo controller 2dc8:3106

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leonardo Brondani Schenkel <leonardo@schenkel.net>

commit 66372fa9936088bf29c4f47907efeff03c51a2c8 upstream.

8BitDo Pro 2 Wired Controller shares the same USB identifier
(2dc8:3106) as a different device, so amend name to reflect that and
reduce confusion as the user might think the controller was misdetected.

Because Pro 2 Wired will not work in XTYPE_XBOXONE mode (button presses
won't register), tagging it as XTYPE_XBOX360 remains appropriate.

Signed-off-by: Leonardo Brondani Schenkel <leonardo@schenkel.net>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-2-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -374,7 +374,7 @@ static const struct xpad_device {
 	{ 0x294b, 0x3303, "Snakebyte GAMEPAD BASE X", 0, XTYPE_XBOXONE },
 	{ 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
-	{ 0x2dc8, 0x3106, "8BitDo Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x310a, "8BitDo Ultimate 2C Wireless Controller", 0, XTYPE_XBOX360 },
 	{ 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },

[PATCH 6.6 42/43] Input: xpad - add support for Nacon Evol-X Xbox One Controller

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matheos Mattsson <matheos.mattsson@gmail.com>

commit 3a6e5ed2372bcb2a3c554fda32419efd91ff9b0c upstream.

Add Nacon Evol-X Xbox One to the list of supported devices.

Signed-off-by: Matheos Mattsson <matheos.mattsson@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-9-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -385,6 +385,7 @@ static const struct xpad_device {
 	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0646, "Nacon Pro Compact", 0, XTYPE_XBOXONE },
+	{ 0x3285, 0x0663, "Nacon Evol-X", 0, XTYPE_XBOXONE },
 	{ 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
@@ -532,6 +533,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir controllers */
 	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
+	XPAD_XBOXONE_VENDOR(0x3285),		/* Nacon Evol-X */
 	XPAD_XBOX360_VENDOR(0x3537),		/* GameSir Controllers */
 	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */
 	{ }

[PATCH 6.6 43/43] Input: xpad - add support for wooting two he (arm)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Greiner <jack@emoss.org>

commit 222f3390c15c4452a9f7e26f5b7d9138e75d00d5 upstream.

Add Wooting Two HE (ARM) to the list of supported devices.

Signed-off-by: Jack Greiner <jack@emoss.org>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-3-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -381,6 +381,7 @@ static const struct xpad_device {
 	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1220, "Wooting Two HE", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1230, "Wooting Two HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },

Re: [PATCH 6.6 00/43] 6.6.75-rc1 review

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 344 bytes --]

On Thu, Jan 30, 2025 at 02:59:07PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.75 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6.6 00/43] 6.6.75-rc1 review

[Florian Fainelli]

On 1/30/25 05:59, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.75 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Feb 2025 13:34:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.75-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.6 00/43] 6.6.75-rc1 review

[Jon Hunter]

On Thu, 30 Jan 2025 14:59:07 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.75 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Feb 2025 13:34:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.75-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.6:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    116 tests:	116 pass, 0 fail

Linux version:	6.6.75-rc1-g2c44b59139a8
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.6 00/43] 6.6.75-rc1 review

[Ron Economos]

On 1/30/25 05:59, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.75 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 01 Feb 2025 13:34:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.75-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.6 00/43] 6.6.75-rc1 review

[Naresh Kamboju]

On Thu, 30 Jan 2025 at 19:45, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.75 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 01 Feb 2025 13:34:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.75-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 6.6.75-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 2c44b59139a8bd89a50d82ca7f695ca18d867362
* git describe: v6.6.74-44-g2c44b59139a8
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.74-44-g2c44b59139a8

## Test Regressions (compared to v6.6.71-130-g6a7137c98fe3)

## Metric Regressions (compared to v6.6.71-130-g6a7137c98fe3)

## Test Fixes (compared to v6.6.71-130-g6a7137c98fe3)

## Metric Fixes (compared to v6.6.71-130-g6a7137c98fe3)

## Test result summary
total: 125925, pass: 88948, fail: 18749, skip: 17735, xfail: 493

## Build Summary
* arc: 6 total, 5 passed, 1 failed
* arm: 133 total, 133 passed, 0 failed
* arm64: 46 total, 44 passed, 2 failed
* i386: 31 total, 28 passed, 3 failed
* mips: 30 total, 25 passed, 5 failed
* parisc: 5 total, 5 passed, 0 failed
* powerpc: 36 total, 32 passed, 4 failed
* riscv: 23 total, 22 passed, 1 failed
* s390: 18 total, 14 passed, 4 failed
* sh: 12 total, 10 passed, 2 failed
* sparc: 9 total, 8 passed, 1 failed
* x86_64: 38 total, 37 passed, 1 failed

## Test suites summary
* boot
* commands
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.6 00/43] 6.6.75-rc1 review

[Muhammad Usama Anjum]

On 1/30/25 6:59 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.75 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Feb 2025 13:34:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.75-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
OVERVIEW

        Builds: 40 passed, 0 failed

    Boot tests: 625 passed, 1 failed

    CI systems: broonie, maestro

REVISION

    Commit
        name: v6.6.74-44-g2c44b59139a8
        hash: 2c44b59139a8bd89a50d82ca7f695ca18d867362
    Checked out from
        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y


BUILDS

    No build failures found

BOOT TESTS

    Failures

      i386:(defconfig)
      -hp-14b-na0052xx-zork
	https://kcidb.kernelci.org/d/test/test?var-datasource=edquppk2ghfcwc&var-origin=$__all&var-build_architecture=$__all&var-build_config_name=$__all&var-id=maestro:679b96be65fae3351e30f0f9&from=now-100y&to=now&timezone=browser&var-test_path=&var-issue_presence=$__all
      CI system: maestro

See complete and up-to-date report at:

    https://kcidb.kernelci.org/d/revision/revision?orgId=1&var-git_commit_hash=2c44b59139a8bd89a50d82ca7f695ca18d867362&var-patchset_hash=


Tested-by: kernelci.org bot <bot@kernelci.org>

Thanks,
KernelCI team

Re: [PATCH 6.6] 6.6.75-rc1 review

[Hardik Garg]

The kernel, bpf tool, perf tool, and kselftest builds fine for v6.6.75-rc1 on x86 and arm64 Azure VM.

Tested-by: Hardik Garg <hargar@linux.microsoft.com>




Thanks,
Hardik

Re: [PATCH 6.6 00/43] 6.6.75-rc1 review

[Peter Schneider]

Am 30.01.2025 um 14:59 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.6.75 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg 
oddities or regressions found.

Tested-by: Peter Schneider <pschneider1968@googlemail.com>


Beste Grüße,
Peter Schneider

-- 
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com

Re: [PATCH 6.6 00/43] 6.6.75-rc1 review

[Harshit Mogalapalli]

Hi Greg,

On 30/01/25 19:29, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.75 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Feb 2025 13:34:42 +0000.
> Anything received after that time might be too late.


No problems seen on x86_64 and aarch64 with our testing.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Thanks,
Harshit