[PATCH v1 1/1] eeprom: digsy_mtc: Make GPIO lookup table match the device

[PATCH v1 1/1] eeprom: digsy_mtc: Make GPIO lookup table match the device

[Andy Shevchenko]

The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.

Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/misc/eeprom/digsy_mtc_eeprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
index 88888485e6f8..ee58f7ce5bfa 100644
--- a/drivers/misc/eeprom/digsy_mtc_eeprom.c
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -50,7 +50,7 @@ static struct platform_device digsy_mtc_eeprom = {
 };
 
 static struct gpiod_lookup_table eeprom_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
+	.dev_id         = "spi_gpio.1",
 	.table          = {
 		GPIO_LOOKUP("gpio@b00", GPIO_EEPROM_CLK,
 			    "sck", GPIO_ACTIVE_HIGH),
-- 
2.43.0.rc1.1336.g36b5255a03ac