From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, qemu-ppc@nongnu.org,
"Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
"Alistair Francis" <alistair@alistair23.me>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Thomas Huth" <thuth@redhat.com>,
"Markus Armbruster" <armbru@redhat.com>,
qemu-arm@nongnu.org, "Daniel P. Berrangé" <berrange@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH v6 02/11] hw/intc/xilinx_intc: Make device endianness configurable
Date: Wed, 12 Feb 2025 12:24:04 +0100 [thread overview]
Message-ID: <20250212112413.37553-3-philmd@linaro.org> (raw)
In-Reply-To: <20250212112413.37553-1-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair
of DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "little-endian" property to select the device
endianness, defaulting to little endian.
Set the proper endianness for each machine using the device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/intc/xilinx_intc.c | 60 ++++++++++++++++++------
hw/microblaze/petalogix_ml605_mmu.c | 1 +
hw/microblaze/petalogix_s3adsp1800_mmu.c | 3 ++
hw/ppc/virtex_ml507.c | 1 +
hw/riscv/microblaze-v-generic.c | 1 +
5 files changed, 52 insertions(+), 14 deletions(-)
diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c
index 6930f83907a..523402b688c 100644
--- a/hw/intc/xilinx_intc.c
+++ b/hw/intc/xilinx_intc.c
@@ -3,6 +3,9 @@
*
* Copyright (c) 2009 Edgar E. Iglesias.
*
+ * https://docs.amd.com/v/u/en-US/xps_intc
+ * DS572: LogiCORE IP XPS Interrupt Controller (v2.01a)
+ *
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
@@ -23,10 +26,12 @@
*/
#include "qemu/osdep.h"
+#include "qapi/error.h"
#include "hw/sysbus.h"
#include "qemu/module.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
+#include "hw/qdev-properties-system.h"
#include "qom/object.h"
#define D(x)
@@ -49,6 +54,7 @@ struct XpsIntc
{
SysBusDevice parent_obj;
+ EndianMode model_endianness;
MemoryRegion mmio;
qemu_irq parent_irq;
@@ -140,18 +146,29 @@ static void pic_write(void *opaque, hwaddr addr,
update_irq(p);
}
-static const MemoryRegionOps pic_ops = {
- .read = pic_read,
- .write = pic_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
- .impl = {
- .min_access_size = 4,
- .max_access_size = 4,
+static const MemoryRegionOps pic_ops[2] = {
+ [0 ... 1] = {
+ .read = pic_read,
+ .write = pic_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .valid = {
+ /*
+ * All XPS INTC registers are accessed through the PLB interface.
+ * The base address for these registers is provided by the
+ * configuration parameter, C_BASEADDR. Each register is 32 bits
+ * although some bits may be unused and is accessed on a 4-byte
+ * boundary offset from the base address.
+ */
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
},
- .valid = {
- .min_access_size = 4,
- .max_access_size = 4
- }
+ [ENDIAN_MODE_BIG].endianness = DEVICE_BIG_ENDIAN,
+ [ENDIAN_MODE_LITTLE].endianness = DEVICE_LITTLE_ENDIAN,
};
static void irq_handler(void *opaque, int irq, int level)
@@ -174,13 +191,27 @@ static void xilinx_intc_init(Object *obj)
qdev_init_gpio_in(DEVICE(obj), irq_handler, 32);
sysbus_init_irq(SYS_BUS_DEVICE(obj), &p->parent_irq);
-
- memory_region_init_io(&p->mmio, obj, &pic_ops, p, "xlnx.xps-intc",
- R_MAX * 4);
sysbus_init_mmio(SYS_BUS_DEVICE(obj), &p->mmio);
}
+static void xilinx_intc_realize(DeviceState *dev, Error **errp)
+{
+ XpsIntc *p = XILINX_INTC(dev);
+
+ if (p->model_endianness == ENDIAN_MODE_UNSPECIFIED) {
+ error_setg(errp, TYPE_XILINX_INTC " property 'endianness'"
+ " must be set to 'big' or 'little'");
+ return;
+ }
+
+ memory_region_init_io(&p->mmio, OBJECT(dev),
+ &pic_ops[p->model_endianness],
+ p, "xlnx.xps-intc",
+ R_MAX * 4);
+}
+
static const Property xilinx_intc_properties[] = {
+ DEFINE_PROP_ENDIAN_NODEFAULT("endianness", XpsIntc, model_endianness),
DEFINE_PROP_UINT32("kind-of-intr", XpsIntc, c_kind_of_intr, 0),
};
@@ -188,6 +219,7 @@ static void xilinx_intc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ dc->realize = xilinx_intc_realize;
device_class_set_props(dc, xilinx_intc_properties);
}
diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
index 8b44be75a22..55398cc67d1 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -111,6 +111,7 @@ petalogix_ml605_init(MachineState *machine)
dev = qdev_new("xlnx.xps-intc");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_LITTLE);
qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c b/hw/microblaze/petalogix_s3adsp1800_mmu.c
index 2c0d8c34cd2..15cabe11777 100644
--- a/hw/microblaze/petalogix_s3adsp1800_mmu.c
+++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c
@@ -71,6 +71,8 @@ petalogix_s3adsp1800_init(MachineState *machine)
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
MemoryRegion *sysmem = get_system_memory();
+ EndianMode endianness = TARGET_BIG_ENDIAN ? ENDIAN_MODE_BIG
+ : ENDIAN_MODE_LITTLE;
cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
object_property_set_str(OBJECT(cpu), "version", "7.10.d", &error_abort);
@@ -95,6 +97,7 @@ petalogix_s3adsp1800_init(MachineState *machine)
64 * KiB, 1, 0x89, 0x18, 0x0000, 0x0, 1);
dev = qdev_new("xlnx.xps-intc");
+ qdev_prop_set_enum(dev, "endianness", endianness);
qdev_prop_set_uint32(dev, "kind-of-intr",
1 << ETHLITE_IRQ | 1 << UARTLITE_IRQ);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
diff --git a/hw/ppc/virtex_ml507.c b/hw/ppc/virtex_ml507.c
index 23238119273..df8f9644829 100644
--- a/hw/ppc/virtex_ml507.c
+++ b/hw/ppc/virtex_ml507.c
@@ -217,6 +217,7 @@ static void virtex_init(MachineState *machine)
cpu_irq = qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_INT);
dev = qdev_new("xlnx.xps-intc");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_BIG);
qdev_prop_set_uint32(dev, "kind-of-intr", 0);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
diff --git a/hw/riscv/microblaze-v-generic.c b/hw/riscv/microblaze-v-generic.c
index 26788a1824a..ebdd461ae98 100644
--- a/hw/riscv/microblaze-v-generic.c
+++ b/hw/riscv/microblaze-v-generic.c
@@ -79,6 +79,7 @@ static void mb_v_generic_init(MachineState *machine)
memory_region_add_subregion(sysmem, ddr_base, phys_ram);
dev = qdev_new("xlnx.xps-intc");
+ qdev_prop_set_enum(dev, "endianness", ENDIAN_MODE_LITTLE);
qdev_prop_set_uint32(dev, "kind-of-intr",
1 << UARTLITE_IRQ);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
--
2.47.1
next prev parent reply other threads:[~2025-02-12 11:26 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-12 11:24 [PATCH v6 00/11] hw/microblaze: Allow running cross-endian vCPUs Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 01/11] hw/qdev-properties-system: Introduce EndianMode QAPI enum Philippe Mathieu-Daudé
2025-02-12 11:37 ` Thomas Huth
2025-02-12 11:43 ` Philippe Mathieu-Daudé
2025-02-12 12:02 ` Philippe Mathieu-Daudé
2025-02-12 12:11 ` Daniel P. Berrangé
2025-02-12 12:56 ` BALATON Zoltan
2025-02-12 13:53 ` Philippe Mathieu-Daudé
2025-02-12 14:03 ` Philippe Mathieu-Daudé
2025-02-12 16:23 ` BALATON Zoltan
2025-02-12 18:17 ` Philippe Mathieu-Daudé
2025-02-12 22:34 ` BALATON Zoltan
2025-02-13 7:07 ` Thomas Huth
2025-02-13 13:59 ` BALATON Zoltan
2025-02-13 14:24 ` Philippe Mathieu-Daudé
2025-02-13 14:33 ` Thomas Huth
2025-02-13 14:56 ` BALATON Zoltan
2025-02-12 11:24 ` Philippe Mathieu-Daudé [this message]
2025-02-12 11:42 ` [PATCH v6 02/11] hw/intc/xilinx_intc: Make device endianness configurable Thomas Huth
2025-02-12 11:44 ` Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 03/11] hw/net/xilinx_ethlite: " Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 04/11] hw/timer/xilinx_timer: " Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 05/11] hw/char/xilinx_uartlite: " Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 06/11] hw/ssi/xilinx_spi: " Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 07/11] tests/functional: Avoid using www.qemu-advent-calendar.org URL Philippe Mathieu-Daudé
2025-02-12 11:49 ` Thomas Huth
2025-02-12 11:53 ` Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 08/11] tests/functional: Explicit endianness of microblaze assets Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 09/11] tests/functional: Allow microblaze tests to take a machine name argument Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 10/11] tests/functional: Remove sleep() kludges from microblaze tests Philippe Mathieu-Daudé
2025-02-12 11:24 ` [PATCH v6 11/11] tests/functional: Have microblaze tests inherit common parent class Philippe Mathieu-Daudé
2025-02-12 11:46 ` Thomas Huth
2025-02-12 11:55 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250212112413.37553-3-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=alistair@alistair23.me \
--cc=armbru@redhat.com \
--cc=berrange@redhat.com \
--cc=edgar.iglesias@gmail.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.