All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: linux-riscv@lists.infradead.org, linux-rtc@vger.kernel.org,
	Jingbao Qiu <qiujingbao.dlmu@gmail.com>,
	Inochi Amaoto <inochiama@gmail.com>,
	robh@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org, unicorn_wang@outlook.com,
	inochiama@outlook.com, paul.walmsley@sifive.com,
	palmer@dabbelt.com, aou@eecs.berkeley.edu, dlan@gentoo.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v10 2/2] rtc: sophgo: add rtc support for Sophgo CV1800 SoC
Date: Thu, 13 Feb 2025 21:58:18 +0100	[thread overview]
Message-ID: <20250213205818f14edd30@mail.local> (raw)
In-Reply-To: <20250213184622.2099324-3-alexander.sverdlin@gmail.com>

On 13/02/2025 19:46:15+0100, Alexander Sverdlin wrote:
> +static int cv1800_rtc_probe(struct platform_device *pdev)
> +{
> +	struct cv1800_rtc_priv *rtc;
> +	u32 ctrl_val;
> +	void __iomem *base;
> +	int ret;
> +
> +	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
> +	if (!rtc)
> +		return -ENOMEM;
> +
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	rtc->rtc_map = devm_regmap_init_mmio(&pdev->dev, base,
> +					     &cv1800_rtc_regmap_config);
> +	if (IS_ERR(rtc->rtc_map))
> +		return PTR_ERR(rtc->rtc_map);
> +
> +	rtc->irq = platform_get_irq(pdev, 0);
> +	if (rtc->irq < 0)
> +		return rtc->irq;
> +
> +	rtc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
> +	if (IS_ERR(rtc->clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(rtc->clk),
> +				     "clk not found\n");
> +
> +	platform_set_drvdata(pdev, rtc);
> +
> +	device_init_wakeup(&pdev->dev, 1);
> +
> +	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
> +	if (IS_ERR(rtc->rtc_dev))
> +		return PTR_ERR(rtc->rtc_dev);
> +
> +	rtc->rtc_dev->ops = &cv1800_rtc_ops;
> +	rtc->rtc_dev->range_max = U32_MAX;
> +
> +	ret = devm_request_irq(&pdev->dev, rtc->irq, cv1800_rtc_irq_handler,
> +			       IRQF_TRIGGER_HIGH, "rtc alarm", rtc);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "cannot register interrupt handler\n");
> +
> +	rtc_enable_sec_counter(rtc);

Really, this must be avoided, this loses precious information and
changing it later will break users. What must be done is to check
whether the RTC is started in .read_time if this is not the case, return
-EINVAL instead of an invalid date/time.
The RTC must be started once the time is set for the first time. This
ensures we can detect when the time is invalid.


> +
> +	return devm_rtc_register_device(rtc->rtc_dev);
> +}
> +
> +static const struct of_device_id cv1800_dt_ids[] = {
> +	{ .compatible = "sophgo,cv1800-rtc" },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, cv1800_dt_ids);
> +
> +static struct platform_driver cv1800_rtc_driver = {
> +	.driver = {
> +		.name = "sophgo-cv1800-rtc",
> +		.of_match_table = cv1800_dt_ids,
> +	},
> +	.probe = cv1800_rtc_probe,
> +};
> +
> +module_platform_driver(cv1800_rtc_driver);
> +MODULE_AUTHOR("Jingbao Qiu");
> +MODULE_DESCRIPTION("Sophgo cv1800 RTC Driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.48.1
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: linux-riscv@lists.infradead.org, linux-rtc@vger.kernel.org,
	Jingbao Qiu <qiujingbao.dlmu@gmail.com>,
	Inochi Amaoto <inochiama@gmail.com>,
	robh@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org, unicorn_wang@outlook.com,
	inochiama@outlook.com, paul.walmsley@sifive.com,
	palmer@dabbelt.com, aou@eecs.berkeley.edu, dlan@gentoo.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v10 2/2] rtc: sophgo: add rtc support for Sophgo CV1800 SoC
Date: Thu, 13 Feb 2025 21:58:18 +0100	[thread overview]
Message-ID: <20250213205818f14edd30@mail.local> (raw)
In-Reply-To: <20250213184622.2099324-3-alexander.sverdlin@gmail.com>

On 13/02/2025 19:46:15+0100, Alexander Sverdlin wrote:
> +static int cv1800_rtc_probe(struct platform_device *pdev)
> +{
> +	struct cv1800_rtc_priv *rtc;
> +	u32 ctrl_val;
> +	void __iomem *base;
> +	int ret;
> +
> +	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
> +	if (!rtc)
> +		return -ENOMEM;
> +
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	rtc->rtc_map = devm_regmap_init_mmio(&pdev->dev, base,
> +					     &cv1800_rtc_regmap_config);
> +	if (IS_ERR(rtc->rtc_map))
> +		return PTR_ERR(rtc->rtc_map);
> +
> +	rtc->irq = platform_get_irq(pdev, 0);
> +	if (rtc->irq < 0)
> +		return rtc->irq;
> +
> +	rtc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
> +	if (IS_ERR(rtc->clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(rtc->clk),
> +				     "clk not found\n");
> +
> +	platform_set_drvdata(pdev, rtc);
> +
> +	device_init_wakeup(&pdev->dev, 1);
> +
> +	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
> +	if (IS_ERR(rtc->rtc_dev))
> +		return PTR_ERR(rtc->rtc_dev);
> +
> +	rtc->rtc_dev->ops = &cv1800_rtc_ops;
> +	rtc->rtc_dev->range_max = U32_MAX;
> +
> +	ret = devm_request_irq(&pdev->dev, rtc->irq, cv1800_rtc_irq_handler,
> +			       IRQF_TRIGGER_HIGH, "rtc alarm", rtc);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "cannot register interrupt handler\n");
> +
> +	rtc_enable_sec_counter(rtc);

Really, this must be avoided, this loses precious information and
changing it later will break users. What must be done is to check
whether the RTC is started in .read_time if this is not the case, return
-EINVAL instead of an invalid date/time.
The RTC must be started once the time is set for the first time. This
ensures we can detect when the time is invalid.


> +
> +	return devm_rtc_register_device(rtc->rtc_dev);
> +}
> +
> +static const struct of_device_id cv1800_dt_ids[] = {
> +	{ .compatible = "sophgo,cv1800-rtc" },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, cv1800_dt_ids);
> +
> +static struct platform_driver cv1800_rtc_driver = {
> +	.driver = {
> +		.name = "sophgo-cv1800-rtc",
> +		.of_match_table = cv1800_dt_ids,
> +	},
> +	.probe = cv1800_rtc_probe,
> +};
> +
> +module_platform_driver(cv1800_rtc_driver);
> +MODULE_AUTHOR("Jingbao Qiu");
> +MODULE_DESCRIPTION("Sophgo cv1800 RTC Driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.48.1
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2025-02-13 20:58 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-13 18:46 [PATCH v10 0/2] riscv: rtc: sophgo: add rtc support for CV1800 Alexander Sverdlin
2025-02-13 18:46 ` Alexander Sverdlin
2025-02-13 18:46 ` [PATCH v10 1/2] dt-bindings: rtc: sophgo: add RTC support for Sophgo CV1800 series SoC Alexander Sverdlin
2025-02-13 18:46   ` Alexander Sverdlin
2025-02-13 18:46 ` [PATCH v10 2/2] rtc: sophgo: add rtc support for Sophgo CV1800 SoC Alexander Sverdlin
2025-02-13 18:46   ` Alexander Sverdlin
2025-02-13 20:58   ` Alexandre Belloni [this message]
2025-02-13 20:58     ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250213205818f14edd30@mail.local \
    --to=alexandre.belloni@bootlin.com \
    --cc=alexander.sverdlin@gmail.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@gentoo.org \
    --cc=inochiama@gmail.com \
    --cc=inochiama@outlook.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=qiujingbao.dlmu@gmail.com \
    --cc=robh@kernel.org \
    --cc=unicorn_wang@outlook.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.