All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	 Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	 Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
	 Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shi Fu <shifu0704@thundersoft.com>,
	 Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
	"Martin Povišer" <povik+lin@cutebit.org>,
	"Hector Martin" <marcan@marcan.st>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, asahi@lists.linux.dev,
	linux-hwmon@vger.kernel.org, "Neal Gompa" <neal@gompa.dev>,
	"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH v2 19/29] ASoC: tas2764: Power up/down amp on mute ops
Date: Tue, 18 Feb 2025 18:35:53 +1000	[thread overview]
Message-ID: <20250218-apple-codec-changes-v2-19-932760fd7e07@gmail.com> (raw)
In-Reply-To: <20250218-apple-codec-changes-v2-0-932760fd7e07@gmail.com>

From: Hector Martin <marcan@marcan.st>

The ASoC convention is that clocks are removed after codec mute, and
power up/down is more about top level power management. For these chips,
the "mute" state still expects a TDM clock, and yanking the clock in
this state will trigger clock errors. So, do the full
shutdown<->mute<->active transition on the mute operation, so the amp is
in software shutdown by the time the clocks are removed.

This fixes TDM clock errors when streams are stopped.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
 sound/soc/codecs/tas2764.c | 51 ++++++++++---------------
 1 file changed, 21 insertions(+), 30 deletions(-)

diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index 16df453190961b8ea6809cf4e6a9c588f41b5a82..7b69ab94c4bbd5f074d57a42f71b32f5fd63d560 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -195,33 +195,6 @@ static SOC_ENUM_SINGLE_DECL(
 static const struct snd_kcontrol_new tas2764_asi1_mux =
 	SOC_DAPM_ENUM("ASI1 Source", tas2764_ASI1_src_enum);
 
-static int tas2764_dac_event(struct snd_soc_dapm_widget *w,
-			     struct snd_kcontrol *kcontrol, int event)
-{
-	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
-	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
-	int ret;
-
-	switch (event) {
-	case SND_SOC_DAPM_POST_PMU:
-		tas2764->dac_powered = true;
-		ret = tas2764_update_pwr_ctrl(tas2764);
-		break;
-	case SND_SOC_DAPM_PRE_PMD:
-		tas2764->dac_powered = false;
-		ret = tas2764_update_pwr_ctrl(tas2764);
-		break;
-	default:
-		dev_err(tas2764->dev, "Unsupported event\n");
-		return -EINVAL;
-	}
-
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
 static const struct snd_kcontrol_new isense_switch =
 	SOC_DAPM_SINGLE("Switch", TAS2764_PWR_CTRL, TAS2764_ISENSE_POWER_EN, 1, 1);
 static const struct snd_kcontrol_new vsense_switch =
@@ -234,8 +207,7 @@ static const struct snd_soc_dapm_widget tas2764_dapm_widgets[] = {
 			    1, &isense_switch),
 	SND_SOC_DAPM_SWITCH("VSENSE", TAS2764_PWR_CTRL, TAS2764_VSENSE_POWER_EN,
 			    1, &vsense_switch),
-	SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas2764_dac_event,
-			   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_OUTPUT("OUT"),
 	SND_SOC_DAPM_SIGGEN("VMON"),
 	SND_SOC_DAPM_SIGGEN("IMON")
@@ -256,9 +228,28 @@ static int tas2764_mute(struct snd_soc_dai *dai, int mute, int direction)
 {
 	struct tas2764_priv *tas2764 =
 			snd_soc_component_get_drvdata(dai->component);
+	int ret;
+
+	if (!mute) {
+		tas2764->dac_powered = true;
+		ret = tas2764_update_pwr_ctrl(tas2764);
+		if (ret)
+			return ret;
+	}
 
 	tas2764->unmuted = !mute;
-	return tas2764_update_pwr_ctrl(tas2764);
+	ret = tas2764_update_pwr_ctrl(tas2764);
+	if (ret)
+		return ret;
+
+	if (mute) {
+		tas2764->dac_powered = false;
+		ret = tas2764_update_pwr_ctrl(tas2764);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int tas2764_set_bitwidth(struct tas2764_priv *tas2764, int bitwidth)

-- 
2.48.1


  parent reply	other threads:[~2025-02-18  8:38 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-18  8:35 [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-18  8:35 ` [PATCH v2 01/29] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-18  8:35 ` [PATCH v2 02/29] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-18 15:13   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 03/29] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-21 20:24   ` Rob Herring (Arm)
2025-02-18  8:35 ` [PATCH v2 04/29] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-21 20:24   ` Rob Herring (Arm)
2025-02-18  8:35 ` [PATCH v2 05/29] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-18 15:15   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 06/29] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-18  8:35 ` [PATCH v2 07/29] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-18  8:35 ` [PATCH v2 08/29] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic James Calligeros
2025-02-18  8:35 ` [PATCH v2 09/29] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-02-18 15:18   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 10/29] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-18 15:20   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 11/29] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-18  8:35 ` [PATCH v2 12/29] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-18 15:21   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 13/29] ASoC: tas2770: Export 'die_temp' to sysfs James Calligeros
2025-02-18 15:22   ` Mark Brown
2025-02-18 16:09     ` Alyssa Rosenzweig
2025-02-18 16:09     ` Alyssa Rosenzweig
2025-02-18  8:35 ` [PATCH v2 14/29] ASoC: tas2770: expose die temp to hwmon James Calligeros
2025-02-18 15:20   ` Guenter Roeck
2025-02-21 11:31     ` James Calligeros
2025-02-21 15:03       ` Guenter Roeck
2025-02-22  0:16         ` James Calligeros
2025-02-18 15:24   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 15/29] ASoC: tas2764: Export 'die_temp' to sysfs James Calligeros
2025-02-18  8:35 ` [PATCH v2 16/29] ASoC: tas2764: expose die temp to hwmon James Calligeros
2025-02-18  8:35 ` [PATCH v2 17/29] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-18 15:25   ` Mark Brown
2025-02-18 15:55     ` Martin Povišer
2025-02-18  8:35 ` [PATCH v2 18/29] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-18 15:26   ` Mark Brown
2025-02-18  8:35 ` James Calligeros [this message]
2025-02-18  8:35 ` [PATCH v2 20/29] ASoC: tas2764: Add SDZ regulator James Calligeros
2025-02-18 15:33   ` Mark Brown
2025-02-19  4:47     ` James Calligeros
2025-02-20  1:45       ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 21/29] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-18 15:35   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 22/29] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-18  8:35 ` [PATCH v2 23/29] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-18  8:35 ` [PATCH v2 24/29] ASoC: tas2770: Add SDZ regulator James Calligeros
2025-02-18 15:36   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 25/29] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-18  8:36 ` [PATCH v2 26/29] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-18 15:37   ` Mark Brown
2025-02-18  8:36 ` [PATCH v2 27/29] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-18  8:36 ` [PATCH v2 28/29] ASoC: tas2764: Set the SDOUT polarity correctly James Calligeros
2025-02-18 15:38   ` Mark Brown
2025-02-18  8:36 ` [PATCH v2 29/29] ASoC: tas2770: " James Calligeros
2025-02-18 21:30 ` (subset) [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250218-apple-codec-changes-v2-19-932760fd7e07@gmail.com \
    --to=jcalligeros99@gmail.com \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=baojun.xu@ti.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=jdelvare@suse.com \
    --cc=kevin-lu@ti.com \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=marcan@marcan.st \
    --cc=neal@gompa.dev \
    --cc=perex@perex.cz \
    --cc=povik+lin@cutebit.org \
    --cc=robh@kernel.org \
    --cc=shenghao-ding@ti.com \
    --cc=shifu0704@thundersoft.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.