All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	 Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	 Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
	 Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shi Fu <shifu0704@thundersoft.com>,
	 Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
	"Martin Povišer" <povik+lin@cutebit.org>,
	"Hector Martin" <marcan@marcan.st>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, asahi@lists.linux.dev,
	linux-hwmon@vger.kernel.org, "Neal Gompa" <neal@gompa.dev>,
	"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH v2 09/29] ASoC: tas2764: Reinit cache on part reset
Date: Tue, 18 Feb 2025 18:35:43 +1000	[thread overview]
Message-ID: <20250218-apple-codec-changes-v2-9-932760fd7e07@gmail.com> (raw)
In-Reply-To: <20250218-apple-codec-changes-v2-0-932760fd7e07@gmail.com>

From: Martin Povišer <povik+lin@cutebit.org>

When the part is reset in component_probe, do not forget to reinit the
regcache, otherwise the cache can get out of sync with the part's
actual state. This fix is similar to commit 0a0342ede303
("ASoC: tas2770: Reinit regcache on reset") which concerned the
tas2770 driver.

Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
 sound/soc/codecs/tas2764.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index 05d025ffc567fac25110fbde2ca19337b8ee329d..e4003a724c8c09303882ee36fc11133cf5c78b57 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -539,6 +539,8 @@ static uint8_t sn012776_bop_presets[] = {
 	0x06, 0x3e, 0x37, 0x30, 0xff, 0xe6
 };
 
+static const struct regmap_config tas2764_i2c_regmap;
+
 static int tas2764_codec_probe(struct snd_soc_component *component)
 {
 	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
@@ -552,6 +554,7 @@ static int tas2764_codec_probe(struct snd_soc_component *component)
 	}
 
 	tas2764_reset(tas2764);
+	regmap_reinit_cache(tas2764->regmap, &tas2764_i2c_regmap);
 
 	if (tas2764->irq) {
 		ret = snd_soc_component_write(tas2764->component, TAS2764_INT_MASK0, 0xff);

-- 
2.48.1


  parent reply	other threads:[~2025-02-18  8:37 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-18  8:35 [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-18  8:35 ` [PATCH v2 01/29] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-18  8:35 ` [PATCH v2 02/29] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-18 15:13   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 03/29] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-21 20:24   ` Rob Herring (Arm)
2025-02-18  8:35 ` [PATCH v2 04/29] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-21 20:24   ` Rob Herring (Arm)
2025-02-18  8:35 ` [PATCH v2 05/29] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-18 15:15   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 06/29] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-18  8:35 ` [PATCH v2 07/29] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-18  8:35 ` [PATCH v2 08/29] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic James Calligeros
2025-02-18  8:35 ` James Calligeros [this message]
2025-02-18 15:18   ` [PATCH v2 09/29] ASoC: tas2764: Reinit cache on part reset Mark Brown
2025-02-18  8:35 ` [PATCH v2 10/29] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-18 15:20   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 11/29] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-18  8:35 ` [PATCH v2 12/29] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-18 15:21   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 13/29] ASoC: tas2770: Export 'die_temp' to sysfs James Calligeros
2025-02-18 15:22   ` Mark Brown
2025-02-18 16:09     ` Alyssa Rosenzweig
2025-02-18 16:09     ` Alyssa Rosenzweig
2025-02-18  8:35 ` [PATCH v2 14/29] ASoC: tas2770: expose die temp to hwmon James Calligeros
2025-02-18 15:20   ` Guenter Roeck
2025-02-21 11:31     ` James Calligeros
2025-02-21 15:03       ` Guenter Roeck
2025-02-22  0:16         ` James Calligeros
2025-02-18 15:24   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 15/29] ASoC: tas2764: Export 'die_temp' to sysfs James Calligeros
2025-02-18  8:35 ` [PATCH v2 16/29] ASoC: tas2764: expose die temp to hwmon James Calligeros
2025-02-18  8:35 ` [PATCH v2 17/29] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-18 15:25   ` Mark Brown
2025-02-18 15:55     ` Martin Povišer
2025-02-18  8:35 ` [PATCH v2 18/29] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-18 15:26   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 19/29] ASoC: tas2764: Power up/down amp on mute ops James Calligeros
2025-02-18  8:35 ` [PATCH v2 20/29] ASoC: tas2764: Add SDZ regulator James Calligeros
2025-02-18 15:33   ` Mark Brown
2025-02-19  4:47     ` James Calligeros
2025-02-20  1:45       ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 21/29] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-18 15:35   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 22/29] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-18  8:35 ` [PATCH v2 23/29] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-18  8:35 ` [PATCH v2 24/29] ASoC: tas2770: Add SDZ regulator James Calligeros
2025-02-18 15:36   ` Mark Brown
2025-02-18  8:35 ` [PATCH v2 25/29] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-18  8:36 ` [PATCH v2 26/29] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-18 15:37   ` Mark Brown
2025-02-18  8:36 ` [PATCH v2 27/29] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-18  8:36 ` [PATCH v2 28/29] ASoC: tas2764: Set the SDOUT polarity correctly James Calligeros
2025-02-18 15:38   ` Mark Brown
2025-02-18  8:36 ` [PATCH v2 29/29] ASoC: tas2770: " James Calligeros
2025-02-18 21:30 ` (subset) [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250218-apple-codec-changes-v2-9-932760fd7e07@gmail.com \
    --to=jcalligeros99@gmail.com \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=baojun.xu@ti.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=jdelvare@suse.com \
    --cc=kevin-lu@ti.com \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=marcan@marcan.st \
    --cc=neal@gompa.dev \
    --cc=perex@perex.cz \
    --cc=povik+lin@cutebit.org \
    --cc=robh@kernel.org \
    --cc=shenghao-ding@ti.com \
    --cc=shifu0704@thundersoft.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.