All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Studer <alex@studer.dev>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	Alex Studer <alex@studer.dev>
Subject: [PATCH] riscv: dts: allwinner: d1: Add CPU thermal sensor and zone
Date: Mon, 17 Feb 2025 21:06:29 -0500	[thread overview]
Message-ID: <20250218020629.1476126-1-alex@studer.dev> (raw)

The sun20i THS (built in CPU thermal sensor) is supported in code, but
was never added to the device tree. So, add it to the device tree,
along with a thermal zone for the CPU.

Signed-off-by: Alex Studer <alex@studer.dev>
---
 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 31 +++++++++++++++++++
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 16 ++++++++++
 2 files changed, 47 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
index 6367112e6..bdde82aa8 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
@@ -3,6 +3,8 @@
 
 #define SOC_PERIPHERAL_IRQ(nr)	(nr + 16)
 
+#include <dt-bindings/thermal/thermal.h>
+
 #include "sunxi-d1s-t113.dtsi"
 
 / {
@@ -115,4 +117,33 @@ pmu {
 			<0x00000000 0x0000000e 0xffffffff 0xffffffff 0x00010000>,
 			<0x00000000 0x0000000f 0xffffffff 0xffffffff 0x00020000>;
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index e4175adb0..fcfcaf06c 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -426,6 +426,10 @@ sid: efuse@3006000 {
 			reg = <0x3006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
 		};
 
 		crypto: crypto@3040000 {
@@ -934,5 +938,17 @@ rtc: rtc@7090000 {
 			clock-names = "bus", "hosc", "ahb";
 			#clock-cells = <1>;
 		};
+
+		ths: thermal-sensor@2009400 {
+			compatible = "allwinner,sun20i-d1-ths";
+			reg = <0x2009400 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };
-- 
2.48.1




WARNING: multiple messages have this Message-ID (diff)
From: Alex Studer <alex@studer.dev>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	Alex Studer <alex@studer.dev>
Subject: [PATCH] riscv: dts: allwinner: d1: Add CPU thermal sensor and zone
Date: Mon, 17 Feb 2025 21:06:29 -0500	[thread overview]
Message-ID: <20250218020629.1476126-1-alex@studer.dev> (raw)

The sun20i THS (built in CPU thermal sensor) is supported in code, but
was never added to the device tree. So, add it to the device tree,
along with a thermal zone for the CPU.

Signed-off-by: Alex Studer <alex@studer.dev>
---
 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 31 +++++++++++++++++++
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 16 ++++++++++
 2 files changed, 47 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
index 6367112e6..bdde82aa8 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
@@ -3,6 +3,8 @@
 
 #define SOC_PERIPHERAL_IRQ(nr)	(nr + 16)
 
+#include <dt-bindings/thermal/thermal.h>
+
 #include "sunxi-d1s-t113.dtsi"
 
 / {
@@ -115,4 +117,33 @@ pmu {
 			<0x00000000 0x0000000e 0xffffffff 0xffffffff 0x00010000>,
 			<0x00000000 0x0000000f 0xffffffff 0xffffffff 0x00020000>;
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index e4175adb0..fcfcaf06c 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -426,6 +426,10 @@ sid: efuse@3006000 {
 			reg = <0x3006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
 		};
 
 		crypto: crypto@3040000 {
@@ -934,5 +938,17 @@ rtc: rtc@7090000 {
 			clock-names = "bus", "hosc", "ahb";
 			#clock-cells = <1>;
 		};
+
+		ths: thermal-sensor@2009400 {
+			compatible = "allwinner,sun20i-d1-ths";
+			reg = <0x2009400 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };
-- 
2.48.1



_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2025-02-18  2:10 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-18  2:06 Alex Studer [this message]
2025-02-18  2:06 ` [PATCH] riscv: dts: allwinner: d1: Add CPU thermal sensor and zone Alex Studer
2025-02-18 17:23 ` Jernej Škrabec
2025-02-18 17:23   ` Jernej Škrabec
2025-02-19  3:02   ` Alex Studer
2025-02-19  3:02     ` Alex Studer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250218020629.1476126-1-alex@studer.dev \
    --to=alex@studer.dev \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.