All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Hau <hau@realtek.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
	nic_swsd <nic_swsd@realtek.com>,
	"andrew+netdev@lunn.ch" <andrew+netdev@lunn.ch>,
	"davem@davemloft.net" <davem@davemloft.net>,
	"edumazet@google.com" <edumazet@google.com>,
	"kuba@kernel.org" <kuba@kernel.org>,
	"pabeni@redhat.com" <pabeni@redhat.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: Re: [PATCH net-next 2/3] r8169: enable RTL8168H/RTL8168EP/RTL8168FP/RTL8125/RTL8126 LTR support
Date: Mon, 24 Feb 2025 13:00:13 -0600	[thread overview]
Message-ID: <20250224190013.GA469168@bhelgaas> (raw)
In-Reply-To: <1544e50b9e4c4ee6a6d8ba6a777c2f07@realtek.com>

On Mon, Feb 24, 2025 at 04:33:50PM +0000, Hau wrote:
> > On 21.02.2025 08:18, ChunHao Lin wrote:
> > > This patch will enable RTL8168H/RTL8168EP/RTL8168FP/RTL8125/RTL8126
> > > LTR support on the platforms that have tested with LTR enabled.
> > 
> > Where in the code is the check whether platform has been tested with LTR?
> > 
> LTR is for L1,2. But L1 will be disabled when rtl_aspm_is_safe()
> return false. So LTR needs rtl_aspm_is_safe() to return true.
> 
> > > Signed-off-by: ChunHao Lin <hau@realtek.com>
> > > ---
> > >  drivers/net/ethernet/realtek/r8169_main.c | 108
> > > ++++++++++++++++++++++
> > >  1 file changed, 108 insertions(+)
> > >
> > > diff --git a/drivers/net/ethernet/realtek/r8169_main.c
> > > b/drivers/net/ethernet/realtek/r8169_main.c
> > > index 731302361989..9953eaa01c9d 100644
> > > --- a/drivers/net/ethernet/realtek/r8169_main.c
> > > +++ b/drivers/net/ethernet/realtek/r8169_main.c
> > > @@ -2955,6 +2955,111 @@ static void rtl_disable_exit_l1(struct
> > rtl8169_private *tp)
> > >       }
> > >  }
> > >
> > > +static void rtl_set_ltr_latency(struct rtl8169_private *tp) {
> > > +     switch (tp->mac_version) {
> > > +     case RTL_GIGA_MAC_VER_70:
> > > +     case RTL_GIGA_MAC_VER_71:
> > > +             r8168_mac_ocp_write(tp, 0xcdd0, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdd2, 0x8c09);
> > > +             r8168_mac_ocp_write(tp, 0xcdd8, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdd4, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdda, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdd6, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcddc, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcde8, 0x887a);
> > > +             r8168_mac_ocp_write(tp, 0xcdea, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdec, 0x8c09);
> > > +             r8168_mac_ocp_write(tp, 0xcdee, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdf0, 0x8a62);
> > > +             r8168_mac_ocp_write(tp, 0xcdf2, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdf4, 0x883e);
> > > +             r8168_mac_ocp_write(tp, 0xcdf6, 0x9003);
> > > +             break;
> > > +     case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_66:
> > > +             r8168_mac_ocp_write(tp, 0xcdd0, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdd2, 0x889c);
> > > +             r8168_mac_ocp_write(tp, 0xcdd8, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdd4, 0x8c30);
> > > +             r8168_mac_ocp_write(tp, 0xcdda, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdd6, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcddc, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcde8, 0x883e);
> > > +             r8168_mac_ocp_write(tp, 0xcdea, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdec, 0x889c);
> > > +             r8168_mac_ocp_write(tp, 0xcdee, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdf0, 0x8C09);
> > > +             r8168_mac_ocp_write(tp, 0xcdf2, 0x9003);
> > > +             break;
> > > +     case RTL_GIGA_MAC_VER_46 ... RTL_GIGA_MAC_VER_53:
> > > +             r8168_mac_ocp_write(tp, 0xcdd8, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdda, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcddc, 0x9003);
> > > +             r8168_mac_ocp_write(tp, 0xcdd2, 0x883c);
> > > +             r8168_mac_ocp_write(tp, 0xcdd4, 0x8c12);
> > > +             r8168_mac_ocp_write(tp, 0xcdd6, 0x9003);
> > > +             break;
> > > +     default:
> > > +             break;
> > > +     }
> > > +}
> > > +
> > > +static void rtl_reset_pci_ltr(struct rtl8169_private *tp) {
> > > +     struct pci_dev *pdev = tp->pci_dev;
> > > +     u16 cap;
> > > +
> > > +     pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap);
> > > +     if (cap & PCI_EXP_DEVCTL2_LTR_EN) {
> > > +             pcie_capability_clear_word(pdev, PCI_EXP_DEVCTL2,
> > > +                                        PCI_EXP_DEVCTL2_LTR_EN);
> > > +             pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
> > > +                                      PCI_EXP_DEVCTL2_LTR_EN);
> > 
> > I'd prefer that only PCI core deals with these registers
> > (functions like pci_configure_ltr()). Any specific reason for this
> > reset? Is it something which could be applicable for other devices
> > too, so that the PCI core should be extended?
> > 
> It is for specific platform. On that platform driver needs to do
> this to let LTR works.

This definitely looks like code that should not be in a driver.
Drivers shouldn't need to touch ASPM or LTR configuration unless
there's a device defect to work around, and that should use a PCI core
interface.  Depending on what the defect is, we may need to add a new
interface.

This clear/set of PCI_EXP_DEVCTL2_LTR_EN when it was already set could
work around some kind of device defect, or it could be a hint that
something in the PCI core is broken.  Maybe the core is configuring
ASPM/LTR incorrectly.

Bjorn

  reply	other threads:[~2025-02-24 19:00 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-21  7:18 [PATCH net-next 0/3] r8169: enable more devices ASPM and LTR support ChunHao Lin
2025-02-21  7:18 ` [PATCH net-next 1/3] r8169: enable RTL8168H/RTL8168EP/RTL8168FP ASPM support ChunHao Lin
2025-02-21 19:29   ` Heiner Kallweit
2025-02-21  7:18 ` [PATCH net-next 2/3] r8169: enable RTL8168H/RTL8168EP/RTL8168FP/RTL8125/RTL8126 LTR support ChunHao Lin
2025-02-21 19:39   ` Heiner Kallweit
2025-02-24 16:33     ` Hau
2025-02-24 19:00       ` Bjorn Helgaas [this message]
2025-02-28 22:58         ` Heiner Kallweit
2025-03-06 16:51           ` Hau
2025-03-01 15:02       ` Heiner Kallweit
2025-02-21  7:18 ` [PATCH net-next 3/3] r8169: disable RTL8126 ZRX-DC timeout ChunHao Lin
2025-02-21 20:01   ` Heiner Kallweit
2025-02-24 16:09     ` Hau
2025-02-21 20:01   ` Bjorn Helgaas
2025-02-21 20:12     ` Heiner Kallweit
2025-02-21 20:35       ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250224190013.GA469168@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=bhelgaas@google.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hau@realtek.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.