From: Heiner Kallweit <hkallweit1@gmail.com>
To: ChunHao Lin <hau@realtek.com>,
nic_swsd@realtek.com, andrew+netdev@lunn.ch, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
Bjorn Helgaas <bhelgaas@google.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: Re: [PATCH net-next 3/3] r8169: disable RTL8126 ZRX-DC timeout
Date: Fri, 21 Feb 2025 21:01:15 +0100 [thread overview]
Message-ID: <8eadd7db-aeb8-4c2a-8758-e4dbd06788ca@gmail.com> (raw)
In-Reply-To: <20250221071828.12323-442-nic_swsd@realtek.com>
On 21.02.2025 08:18, ChunHao Lin wrote:
> Disable it due to it dose not meet ZRX-DC specification. If it is enabled,
> device will exit L1 substate every 100ms. Disable it for saving more power
> in L1 substate.
>
Is this compliant with the PCIe spec? Not being an expert on this topic,
but when I read e.g. the following then my understanding is that this wakeup
every 100ms is the expected behavior.
https://lore.kernel.org/all/1610033323-10560-4-git-send-email-shradha.t@samsung.com/T/
> Signed-off-by: ChunHao Lin <hau@realtek.com>
> ---
> drivers/net/ethernet/realtek/r8169_main.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 9953eaa01c9d..7a5b99d54e12 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -2851,6 +2851,21 @@ static u32 rtl_csi_read(struct rtl8169_private *tp, int addr)
> RTL_R32(tp, CSIDR) : ~0;
> }
>
> +static void rtl_disable_zrxdc_timeout(struct rtl8169_private *tp)
> +{
> + struct pci_dev *pdev = tp->pci_dev;
> + u8 val;
> +
> + if (pdev->cfg_size > 0x0890 &&
> + pci_read_config_byte(pdev, 0x0890, &val) == PCIBIOS_SUCCESSFUL &&
> + pci_write_config_byte(pdev, 0x0890, val & ~BIT(0)) == PCIBIOS_SUCCESSFUL)
> + return;
> +
> + netdev_notice_once(tp->dev,
> + "No native access to PCI extended config space, falling back to CSI\n");
> + rtl_csi_write(tp, 0x0890, rtl_csi_read(tp, 0x0890) & ~BIT(0));
> +}
> +
> static void rtl_set_aspm_entry_latency(struct rtl8169_private *tp, u8 val)
> {
> struct pci_dev *pdev = tp->pci_dev;
> @@ -3930,6 +3945,7 @@ static void rtl_hw_start_8125d(struct rtl8169_private *tp)
>
> static void rtl_hw_start_8126a(struct rtl8169_private *tp)
> {
> + rtl_disable_zrxdc_timeout(tp);
> rtl_set_def_aspm_entry_latency(tp);
> rtl_hw_start_8125_common(tp);
> }
next prev parent reply other threads:[~2025-02-21 20:00 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-21 7:18 [PATCH net-next 0/3] r8169: enable more devices ASPM and LTR support ChunHao Lin
2025-02-21 7:18 ` [PATCH net-next 1/3] r8169: enable RTL8168H/RTL8168EP/RTL8168FP ASPM support ChunHao Lin
2025-02-21 19:29 ` Heiner Kallweit
2025-02-21 7:18 ` [PATCH net-next 2/3] r8169: enable RTL8168H/RTL8168EP/RTL8168FP/RTL8125/RTL8126 LTR support ChunHao Lin
2025-02-21 19:39 ` Heiner Kallweit
2025-02-24 16:33 ` Hau
2025-02-24 19:00 ` Bjorn Helgaas
2025-02-28 22:58 ` Heiner Kallweit
2025-03-06 16:51 ` Hau
2025-03-01 15:02 ` Heiner Kallweit
2025-02-21 7:18 ` [PATCH net-next 3/3] r8169: disable RTL8126 ZRX-DC timeout ChunHao Lin
2025-02-21 20:01 ` Heiner Kallweit [this message]
2025-02-24 16:09 ` Hau
2025-02-21 20:01 ` Bjorn Helgaas
2025-02-21 20:12 ` Heiner Kallweit
2025-02-21 20:35 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8eadd7db-aeb8-4c2a-8758-e4dbd06788ca@gmail.com \
--to=hkallweit1@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hau@realtek.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.