From: "Jonathan Neuschäfer" <j.ne@posteo.net>
To: Alan Stern <stern@rowland.harvard.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, usb-storage@lists.one-eyed-alien.net,
linux-kernel@vger.kernel.org,
"Jonathan Neuschäfer" <j.ne@posteo.net>
Subject: [PATCH v2 9/9] usb: storage: shuttle_usbat: Use const for constant array
Date: Wed, 26 Feb 2025 15:17:31 +0100 [thread overview]
Message-ID: <20250226-misc-const-v2-9-ab655a4a29cc@posteo.net> (raw)
In-Reply-To: <20250226-misc-const-v2-0-ab655a4a29cc@posteo.net>
This array is only read, not modified.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
---
V2:
- new patch
---
drivers/usb/storage/shuttle_usbat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index c33cbf177e6fcaa80e0d2639594d1314c59f4950..27faa0ead11d1b0ee9e45ba6a3ee5bade8a416e4 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1683,7 +1683,7 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
struct usbat_info *info = (struct usbat_info *) (us->extra);
unsigned long block, blocks;
unsigned char *ptr = us->iobuf;
- static unsigned char inquiry_response[36] = {
+ static const unsigned char inquiry_response[36] = {
0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
};
--
2.48.0.rc1.219.gb6b6757d772
WARNING: multiple messages have this Message-ID (diff)
From: "Jonathan Neuschäfer via B4 Relay" <devnull+j.ne.posteo.net@kernel.org>
To: Alan Stern <stern@rowland.harvard.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, usb-storage@lists.one-eyed-alien.net,
linux-kernel@vger.kernel.org,
"Jonathan Neuschäfer" <j.ne@posteo.net>
Subject: [PATCH v2 9/9] usb: storage: shuttle_usbat: Use const for constant array
Date: Wed, 26 Feb 2025 15:17:31 +0100 [thread overview]
Message-ID: <20250226-misc-const-v2-9-ab655a4a29cc@posteo.net> (raw)
In-Reply-To: <20250226-misc-const-v2-0-ab655a4a29cc@posteo.net>
From: Jonathan Neuschäfer <j.ne@posteo.net>
This array is only read, not modified.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
---
V2:
- new patch
---
drivers/usb/storage/shuttle_usbat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index c33cbf177e6fcaa80e0d2639594d1314c59f4950..27faa0ead11d1b0ee9e45ba6a3ee5bade8a416e4 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1683,7 +1683,7 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
struct usbat_info *info = (struct usbat_info *) (us->extra);
unsigned long block, blocks;
unsigned char *ptr = us->iobuf;
- static unsigned char inquiry_response[36] = {
+ static const unsigned char inquiry_response[36] = {
0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
};
--
2.48.0.rc1.219.gb6b6757d772
next prev parent reply other threads:[~2025-02-26 14:17 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-26 14:17 [PATCH v2 0/9] usb: storage: Mark various arrays as const Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` [PATCH v2 1/9] usb: storage: jumpshot: Use const for constant arrays Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` [PATCH v2 2/9] usb: storage: transport: Use const for constant array Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` [PATCH v2 3/9] usb: storage: alauda: Use const for card ID array Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` [PATCH v2 4/9] usb: storage: datafab: Use const for constant arrays Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` [PATCH v2 5/9] usb: storage: initializers: Use const for constant array Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` [PATCH v2 6/9] usb: storage: realtek_cr: Use const for constant arrays Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` [PATCH v2 7/9] usb: storage: sddr09: " Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` [PATCH v2 8/9] usb: storage: sddr55: " Jonathan Neuschäfer
2025-02-26 14:17 ` Jonathan Neuschäfer via B4 Relay
2025-02-26 14:17 ` Jonathan Neuschäfer [this message]
2025-02-26 14:17 ` [PATCH v2 9/9] usb: storage: shuttle_usbat: Use const for constant array Jonathan Neuschäfer via B4 Relay
2025-02-26 17:02 ` [PATCH v2 0/9] usb: storage: Mark various arrays as const Alan Stern
2025-02-26 17:43 ` J. Neuschäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250226-misc-const-v2-9-ab655a4a29cc@posteo.net \
--to=j.ne@posteo.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=usb-storage@lists.one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.