* [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8
@ 2025-03-04 4:37 Gabriel Gonzales
2025-03-04 4:37 ` [PATCH v1 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales
` (3 more replies)
0 siblings, 4 replies; 21+ messages in thread
From: Gabriel Gonzales @ 2025-03-04 4:37 UTC (permalink / raw)
To: linux-kernel
Cc: Gabriel Gonzales, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree
Document the Xiaomi Redmi Note 8, which is based off the SM6125 SoC
Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 618a87693..52f7b217b 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1020,6 +1020,7 @@ properties:
- items:
- enum:
- sony,pdx201
+ - xiaomi,ginkgo
- xiaomi,laurel-sprout
- const: qcom,sm6125
--
2.47.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v1 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo 2025-03-04 4:37 [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales @ 2025-03-04 4:37 ` Gabriel Gonzales 2025-03-04 13:02 ` [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Rob Herring (Arm) ` (2 subsequent siblings) 3 siblings, 0 replies; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-04 4:37 UTC (permalink / raw) To: linux-kernel Cc: Gabriel Gonzales, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli, linux-arm-msm, devicetree, linux-hardening Add support for the Xiaomi Redmi Note 8 based on the SM6125 SoC. Defined features: - dmesg output to bootloader preconfigured display - USB - eMMC - SD card - SMD RPM regulators - Volume Up, Down and Power buttons Signed-off-by: Gabriel Gonzales <semfault@disroot.org> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 294 ++++++++++++++++++ 2 files changed, 295 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 140b0b2ab..4d7d54f69 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm4450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts new file mode 100644 index 000000000..c4677cffa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm6125.dtsi" +#include "pm6125.dtsi" + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <394 0>; /* sm6125 v1 */ + qcom,board-id = <22 0>; + + model = "Xiaomi Redmi Note 8"; + compatible = "xiaomi,ginkgo", "qcom,sm6125"; + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (2340 * 1080 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + debug_mem: debug@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + pmsg-size = <0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; + + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm6125_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l2a: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + vreg_l3a: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + regulator-allow-set-load; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-allow-set-load; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + regulator-allow-set-load; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l24a>; + vqmmc-supply = <&vreg_l11a>; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; -- 2.47.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 2025-03-04 4:37 [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales 2025-03-04 4:37 ` [PATCH v1 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales @ 2025-03-04 13:02 ` Rob Herring (Arm) 2025-03-04 14:14 ` Rob Herring 2025-03-08 1:30 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Gabriel Gonzales 3 siblings, 0 replies; 21+ messages in thread From: Rob Herring (Arm) @ 2025-03-04 13:02 UTC (permalink / raw) To: Gabriel Gonzales Cc: linux-arm-msm, Bjorn Andersson, linux-kernel, devicetree, Konrad Dybcio, Conor Dooley, Krzysztof Kozlowski On Tue, 04 Mar 2025 12:37:39 +0800, Gabriel Gonzales wrote: > Document the Xiaomi Redmi Note 8, which is based off the SM6125 SoC > > Signed-off-by: Gabriel Gonzales <semfault@disroot.org> > --- > Documentation/devicetree/bindings/arm/qcom.yaml | 1 + > 1 file changed, 1 insertion(+) > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250304043742.9252-1-semfault@disroot.org: arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4ac0000: #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4ac0000: #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4cc0000: #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4cc0000: #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 2025-03-04 4:37 [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales 2025-03-04 4:37 ` [PATCH v1 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales 2025-03-04 13:02 ` [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Rob Herring (Arm) @ 2025-03-04 14:14 ` Rob Herring 2025-03-08 1:30 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Gabriel Gonzales 3 siblings, 0 replies; 21+ messages in thread From: Rob Herring @ 2025-03-04 14:14 UTC (permalink / raw) To: Gabriel Gonzales Cc: linux-kernel, Bjorn Andersson, Konrad Dybcio, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree On Tue, Mar 04, 2025 at 12:37:39PM +0800, Gabriel Gonzales wrote: > Document the Xiaomi Redmi Note 8, which is based off the SM6125 SoC Period. Perhaps mention where ginkgo comes from. It's not clear if one looks at just the commit msg or just the schema. > > Signed-off-by: Gabriel Gonzales <semfault@disroot.org> > --- > Documentation/devicetree/bindings/arm/qcom.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml > index 618a87693..52f7b217b 100644 > --- a/Documentation/devicetree/bindings/arm/qcom.yaml > +++ b/Documentation/devicetree/bindings/arm/qcom.yaml > @@ -1020,6 +1020,7 @@ properties: > - items: > - enum: > - sony,pdx201 > + - xiaomi,ginkgo > - xiaomi,laurel-sprout > - const: qcom,sm6125 > > -- > 2.47.0 > ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support 2025-03-04 4:37 [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales ` (2 preceding siblings ...) 2025-03-04 14:14 ` Rob Herring @ 2025-03-08 1:30 ` Gabriel Gonzales 2025-03-08 1:30 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales ` (3 more replies) 3 siblings, 4 replies; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-08 1:30 UTC (permalink / raw) Cc: Gabriel Gonzales, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli, linux-arm-msm, devicetree, linux-kernel, linux-hardening This patchset introduces support for the Redmi Note 8 (codenamed ginkgo). This series is a follow-up to v1 (message-id in in-reply-to header) which was sent without a cover letter. Changes in v2: - Add missing cover letter - Fix up commit message for schema Gabriel Gonzales (2): dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 294 ++++++++++++++++++ 3 files changed, 296 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts -- 2.48.1 ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 2025-03-08 1:30 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Gabriel Gonzales @ 2025-03-08 1:30 ` Gabriel Gonzales 2025-03-10 9:46 ` Krzysztof Kozlowski 2025-03-08 1:30 ` [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales ` (2 subsequent siblings) 3 siblings, 1 reply; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-08 1:30 UTC (permalink / raw) Cc: Gabriel Gonzales, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli, linux-arm-msm, devicetree, linux-kernel, linux-hardening Document the Xiaomi Redmi Note 8 (codenamed ginkgo), which is based off the SM6125 SoC. Signed-off-by: Gabriel Gonzales <semfault@disroot.org> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 618a87693..52f7b217b 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1020,6 +1020,7 @@ properties: - items: - enum: - sony,pdx201 + - xiaomi,ginkgo - xiaomi,laurel-sprout - const: qcom,sm6125 -- 2.48.1 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 2025-03-08 1:30 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales @ 2025-03-10 9:46 ` Krzysztof Kozlowski 0 siblings, 0 replies; 21+ messages in thread From: Krzysztof Kozlowski @ 2025-03-10 9:46 UTC (permalink / raw) To: Gabriel Gonzales Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli, linux-arm-msm, devicetree, linux-kernel, linux-hardening On Sat, Mar 08, 2025 at 09:30:11AM +0800, Gabriel Gonzales wrote: > Document the Xiaomi Redmi Note 8 (codenamed ginkgo), > which is based off the SM6125 SoC. > Do not attach (thread) your patchsets to some other threads (unrelated or older versions). This buries them deep in the mailbox and might interfere with applying entire sets. > Signed-off-by: Gabriel Gonzales <semfault@disroot.org> > --- > Documentation/devicetree/bindings/arm/qcom.yaml | 1 + > 1 file changed, 1 insertion(+) Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- <form letter> This is an automated instruction, just in case, because many review tags are being ignored. If you know the process, you can skip it (please do not feel offended by me posting it here - no bad intentions intended). If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions of patchset, under or above your Signed-off-by tag, unless patch changed significantly (e.g. new properties added to the DT bindings). Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply. https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577 </form letter> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo 2025-03-08 1:30 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Gabriel Gonzales 2025-03-08 1:30 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales @ 2025-03-08 1:30 ` Gabriel Gonzales 2025-03-08 15:11 ` Konrad Dybcio 2025-03-10 14:36 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Rob Herring (Arm) 2025-03-11 0:33 ` [PATCH v3 " Gabriel Gonzales 3 siblings, 1 reply; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-08 1:30 UTC (permalink / raw) Cc: Gabriel Gonzales, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli, linux-arm-msm, devicetree, linux-kernel, linux-hardening Add support for the Xiaomi Redmi Note 8 based on the SM6125 SoC. Defined features: - dmesg output to bootloader preconfigured display - USB - eMMC - SD card - SMD RPM regulators - Volume Up, Down and Power buttons Signed-off-by: Gabriel Gonzales <semfault@disroot.org> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 294 ++++++++++++++++++ 2 files changed, 295 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 140b0b2ab..4d7d54f69 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm4450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts new file mode 100644 index 000000000..c4677cffa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm6125.dtsi" +#include "pm6125.dtsi" + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <394 0>; /* sm6125 v1 */ + qcom,board-id = <22 0>; + + model = "Xiaomi Redmi Note 8"; + compatible = "xiaomi,ginkgo", "qcom,sm6125"; + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (2340 * 1080 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + debug_mem: debug@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + pmsg-size = <0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; + + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm6125_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l2a: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + vreg_l3a: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + regulator-allow-set-load; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-allow-set-load; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + regulator-allow-set-load; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l24a>; + vqmmc-supply = <&vreg_l11a>; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; -- 2.48.1 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo 2025-03-08 1:30 ` [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales @ 2025-03-08 15:11 ` Konrad Dybcio 2025-03-10 23:28 ` Gabriel Gonzales 0 siblings, 1 reply; 21+ messages in thread From: Konrad Dybcio @ 2025-03-08 15:11 UTC (permalink / raw) To: Gabriel Gonzales Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli, linux-arm-msm, devicetree, linux-kernel, linux-hardening On 8.03.2025 2:30 AM, Gabriel Gonzales wrote: > Add support for the Xiaomi Redmi Note 8 based on the SM6125 SoC. > > Defined features: > - dmesg output to bootloader preconfigured display > - USB > - eMMC > - SD card > - SMD RPM regulators > - Volume Up, Down and Power buttons > > Signed-off-by: Gabriel Gonzales <semfault@disroot.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 294 ++++++++++++++++++ > 2 files changed, 295 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 140b0b2ab..4d7d54f69 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm4450-qrd.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts > new file mode 100644 > index 000000000..c4677cffa > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts > @@ -0,0 +1,294 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/input/gpio-keys.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > +#include "sm6125.dtsi" > +#include "pm6125.dtsi" > + > +/ { > + /* required for bootloader to select correct board */ > + qcom,msm-id = <394 0>; /* sm6125 v1 */ #include <dt-bindings/arm/qcom,ids.h> QCOM_ID_SM6125 and drop the comment > + qcom,board-id = <22 0>; [...] > +&hsusb_phy1 { > + vdd-supply = <&vreg_l7a>; > + vdda-pll-supply = <&vreg_l10a>; > + vdda-phy-dpdm-supply = <&vreg_l15a>; > + status = "okay"; Please add a before 'status', file-wide [...] > +&tlmm { > + gpio-reserved-ranges = <22 2>, <28 6>; Would you happen to know what's on the other end of these? Konrad ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo 2025-03-08 15:11 ` Konrad Dybcio @ 2025-03-10 23:28 ` Gabriel Gonzales 2025-03-10 23:37 ` Konrad Dybcio 0 siblings, 1 reply; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-10 23:28 UTC (permalink / raw) To: konrad.dybcio Cc: andersson, conor+dt, devicetree, gpiccoli, kees, konradybcio, krzk+dt, linux-arm-msm, linux-hardening, linux-kernel, robh, semfault, tony.luck On 3/8/25 23:11, Konrad Dybcio wrote: > > +&hsusb_phy1 { > > + vdd-supply = <&vreg_l7a>; > > + vdda-pll-supply = <&vreg_l10a>; > > + vdda-phy-dpdm-supply = <&vreg_l15a>; >> + status = "okay"; > Please add a before 'status', file-wide 'a-status'? [...] > > +&tlmm { > > + gpio-reserved-ranges = <22 2>, <28 6>; > Would you happen to know what's on the other end of these? Unfortunately, no. [...] Gabriel ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo 2025-03-10 23:28 ` Gabriel Gonzales @ 2025-03-10 23:37 ` Konrad Dybcio 2025-03-11 0:18 ` Gabriel Gonzales 0 siblings, 1 reply; 21+ messages in thread From: Konrad Dybcio @ 2025-03-10 23:37 UTC (permalink / raw) To: Gabriel Gonzales, konrad.dybcio Cc: andersson, conor+dt, devicetree, gpiccoli, kees, konradybcio, krzk+dt, linux-arm-msm, linux-hardening, linux-kernel, robh, tony.luck On 3/11/25 12:28 AM, Gabriel Gonzales wrote: > On 3/8/25 23:11, Konrad Dybcio wrote: > >> > +&hsusb_phy1 { >> > + vdd-supply = <&vreg_l7a>; >> > + vdda-pll-supply = <&vreg_l10a>; >> > + vdda-phy-dpdm-supply = <&vreg_l15a>; >>> + status = "okay"; >> Please add a before 'status', file-wide > > 'a-status'? A newline.. the brain didn't synchronize with the hands > > [...] > >> > +&tlmm { >> > + gpio-reserved-ranges = <22 2>, <28 6>; > >> Would you happen to know what's on the other end of these? > > Unfortunately, no. Usually it's some secure i2c connection and pins for the SPI host that the fingerprint reader sits on Konrad ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo 2025-03-10 23:37 ` Konrad Dybcio @ 2025-03-11 0:18 ` Gabriel Gonzales 0 siblings, 0 replies; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-11 0:18 UTC (permalink / raw) To: konrad.dybcio Cc: andersson, conor+dt, devicetree, gpiccoli, kees, konradybcio, krzk+dt, linux-arm-msm, linux-hardening, linux-kernel, robh, semfault, tony.luck On 3/11/25 07:37, Konrad Dybcio wrote: > > 'a-status'? > A newline.. the brain didn't synchronize with the hands How about nodes which only have 'status' as a property name? Do they still need to be placed before a NL or keep as-is? ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support 2025-03-08 1:30 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Gabriel Gonzales 2025-03-08 1:30 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales 2025-03-08 1:30 ` [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales @ 2025-03-10 14:36 ` Rob Herring (Arm) 2025-03-11 0:33 ` [PATCH v3 " Gabriel Gonzales 3 siblings, 0 replies; 21+ messages in thread From: Rob Herring (Arm) @ 2025-03-10 14:36 UTC (permalink / raw) To: Gabriel Gonzales Cc: Conor Dooley, Konrad Dybcio, Guilherme G. Piccoli, linux-arm-msm, linux-kernel, Krzysztof Kozlowski, Kees Cook, devicetree, Bjorn Andersson, linux-hardening, Tony Luck On Sat, 08 Mar 2025 09:30:10 +0800, Gabriel Gonzales wrote: > This patchset introduces support for the Redmi Note 8 (codenamed ginkgo). This series is a follow-up to v1 (message-id in in-reply-to header) which was sent without a cover letter. > > Changes in v2: > - Add missing cover letter > - Fix up commit message for schema > > Gabriel Gonzales (2): > dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 > arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo > > .../devicetree/bindings/arm/qcom.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 294 ++++++++++++++++++ > 3 files changed, 296 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts > > -- > 2.48.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250308013019.10321-1-semfault@disroot.org: arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4ac0000: #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4ac0000: #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4cc0000: #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4cc0000: #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 0/2] Add Xiaomi Redmi Note 8 support 2025-03-08 1:30 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Gabriel Gonzales ` (2 preceding siblings ...) 2025-03-10 14:36 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Rob Herring (Arm) @ 2025-03-11 0:33 ` Gabriel Gonzales 2025-03-11 0:33 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales ` (4 more replies) 3 siblings, 5 replies; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-11 0:33 UTC (permalink / raw) Cc: Gabriel Gonzales, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree, linux-kernel This patchset introduces support for the Redmi Note 8 (codenamed ginkgo). Changes in v2: - Add missing cover letter - Fix up commit message for schema Changes in v3: - Use qcom ids instead of hardcoded msm-id (and other changes suggested by Konrad) - Switch up model properties and qcom properties position Gabriel Gonzales (2): dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 295 ++++++++++++++++++ 3 files changed, 297 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts -- 2.48.1 ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 2025-03-11 0:33 ` [PATCH v3 " Gabriel Gonzales @ 2025-03-11 0:33 ` Gabriel Gonzales 2025-03-11 8:12 ` Krzysztof Kozlowski 2025-03-11 0:33 ` [PATCH v3 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales ` (3 subsequent siblings) 4 siblings, 1 reply; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-11 0:33 UTC (permalink / raw) Cc: Gabriel Gonzales, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree, linux-kernel Document the Xiaomi Redmi Note 8 (codenamed ginkgo), which is based off the SM6125 SoC. Signed-off-by: Gabriel Gonzales <semfault@disroot.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 618a87693..52f7b217b 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1020,6 +1020,7 @@ properties: - items: - enum: - sony,pdx201 + - xiaomi,ginkgo - xiaomi,laurel-sprout - const: qcom,sm6125 -- 2.48.1 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 2025-03-11 0:33 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales @ 2025-03-11 8:12 ` Krzysztof Kozlowski 0 siblings, 0 replies; 21+ messages in thread From: Krzysztof Kozlowski @ 2025-03-11 8:12 UTC (permalink / raw) To: Gabriel Gonzales Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree, linux-kernel On Tue, Mar 11, 2025 at 08:33:47AM +0800, Gabriel Gonzales wrote: > Document the Xiaomi Redmi Note 8 (codenamed ginkgo), > which is based off the SM6125 SoC. > > Signed-off-by: Gabriel Gonzales <semfault@disroot.org> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> How did you resolve my first comment to your v2? Best regards, Krzysztof ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo 2025-03-11 0:33 ` [PATCH v3 " Gabriel Gonzales 2025-03-11 0:33 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales @ 2025-03-11 0:33 ` Gabriel Gonzales 2025-03-11 15:19 ` [PATCH v3 0/2] Add Xiaomi Redmi Note 8 support Rob Herring (Arm) ` (2 subsequent siblings) 4 siblings, 0 replies; 21+ messages in thread From: Gabriel Gonzales @ 2025-03-11 0:33 UTC (permalink / raw) Cc: Gabriel Gonzales, Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kees Cook, Tony Luck, Guilherme G. Piccoli, linux-arm-msm, devicetree, linux-kernel, linux-hardening Add support for the Xiaomi Redmi Note 8 based on the SM6125 SoC. Defined features: - dmesg output to bootloader preconfigured display - USB - eMMC - SD card - SMD RPM regulators - Volume Up, Down and Power buttons Signed-off-by: Gabriel Gonzales <semfault@disroot.org> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 295 ++++++++++++++++++ 2 files changed, 296 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 140b0b2ab..4d7d54f69 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm4450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts new file mode 100644 index 000000000..68a237215 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org> + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm6125.dtsi" +#include "pm6125.dtsi" + +/ { + model = "Xiaomi Redmi Note 8"; + compatible = "xiaomi,ginkgo", "qcom,sm6125"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <QCOM_ID_SM6125>; + qcom,board-id = <22 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (2340 * 1080 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + debug_mem: debug@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + pmsg-size = <0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; + + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm6125_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l2a: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + vreg_l3a: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + regulator-allow-set-load; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-allow-set-load; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + regulator-allow-set-load; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l24a>; + vqmmc-supply = <&vreg_l11a>; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; -- 2.48.1 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v3 0/2] Add Xiaomi Redmi Note 8 support 2025-03-11 0:33 ` [PATCH v3 " Gabriel Gonzales 2025-03-11 0:33 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales 2025-03-11 0:33 ` [PATCH v3 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales @ 2025-03-11 15:19 ` Rob Herring (Arm) 2025-03-14 20:01 ` Bjorn Andersson 2025-08-08 9:47 ` Konrad Dybcio 4 siblings, 0 replies; 21+ messages in thread From: Rob Herring (Arm) @ 2025-03-11 15:19 UTC (permalink / raw) To: Gabriel Gonzales Cc: Konrad Dybcio, linux-arm-msm, devicetree, Conor Dooley, Krzysztof Kozlowski, Bjorn Andersson, linux-kernel On Tue, 11 Mar 2025 08:33:46 +0800, Gabriel Gonzales wrote: > This patchset introduces support for the Redmi Note 8 (codenamed ginkgo). > > Changes in v2: > - Add missing cover letter > - Fix up commit message for schema > Changes in v3: > - Use qcom ids instead of hardcoded msm-id (and other changes suggested by Konrad) > - Switch up model properties and qcom properties position > > Gabriel Gonzales (2): > dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 > arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo > > .../devicetree/bindings/arm/qcom.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 295 ++++++++++++++++++ > 3 files changed, 297 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts > > -- > 2.48.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250311003353.8250-1-semfault@disroot.org: arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: /: qcom,msm-id:0: [394] is too short from schema $id: http://devicetree.org/schemas/arm/qcom.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4ac0000: #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4ac0000: #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4cc0000: #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4cc0000: #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 0/2] Add Xiaomi Redmi Note 8 support 2025-03-11 0:33 ` [PATCH v3 " Gabriel Gonzales ` (2 preceding siblings ...) 2025-03-11 15:19 ` [PATCH v3 0/2] Add Xiaomi Redmi Note 8 support Rob Herring (Arm) @ 2025-03-14 20:01 ` Bjorn Andersson 2025-08-08 9:47 ` Konrad Dybcio 4 siblings, 0 replies; 21+ messages in thread From: Bjorn Andersson @ 2025-03-14 20:01 UTC (permalink / raw) To: Gabriel Gonzales Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree, linux-kernel On Tue, 11 Mar 2025 08:33:46 +0800, Gabriel Gonzales wrote: > This patchset introduces support for the Redmi Note 8 (codenamed ginkgo). > > Changes in v2: > - Add missing cover letter > - Fix up commit message for schema > Changes in v3: > - Use qcom ids instead of hardcoded msm-id (and other changes suggested by Konrad) > - Switch up model properties and qcom properties position > > [...] Applied, thanks! [1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 commit: 4ca8d6f898a85070934490071e429e97bc4e219b [2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo commit: 9b1a6c925c88ed9331a2cae64fb3580e05345ded Best regards, -- Bjorn Andersson <andersson@kernel.org> ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 0/2] Add Xiaomi Redmi Note 8 support 2025-03-11 0:33 ` [PATCH v3 " Gabriel Gonzales ` (3 preceding siblings ...) 2025-03-14 20:01 ` Bjorn Andersson @ 2025-08-08 9:47 ` Konrad Dybcio 4 siblings, 0 replies; 21+ messages in thread From: Konrad Dybcio @ 2025-08-08 9:47 UTC (permalink / raw) To: Gabriel Gonzales Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree, linux-kernel On 3/11/25 1:33 AM, Gabriel Gonzales wrote: > This patchset introduces support for the Redmi Note 8 (codenamed ginkgo). > > Changes in v2: > - Add missing cover letter > - Fix up commit message for schema > Changes in v3: > - Use qcom ids instead of hardcoded msm-id (and other changes suggested by Konrad) > - Switch up model properties and qcom properties position Hi, I noticed that the msm-id is failing the dt-bindings check (need two values, with the first one being the SoC ID and the second one being the revision - 0x10000 as there was only ever a single rev of 6125) I also found this dt: https://github.com/xiaomi-ginkgo/android_kernel_xiaomi_ginkgo/blob/main/arch/arm64/boot/dts/xiaomi/ginkgo-trinket-overlay.dts which suggests that the board ID you used may be incorrect (you put in 22 and the link above says 34 - FWIW 0x22 == 34, maybe that's related?) Could you please give the below a shot and see if it still boots? From ccef64e4058ba657ada5000ec3c2aa9b682c552b Mon Sep 17 00:00:00 2001 From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Date: Fri, 8 Aug 2025 11:45:06 +0200 Subject: [PATCH] arm64: dts: qcom: sm6125-xiaomi-ginkgo: Fix up msm/board ID Include a version in the SoC ID (mostly to appease the bindings checker) and fix up the board-id according to match the device's BSP kernel. Link: https://github.com/xiaomi-ginkgo/android_kernel_xiaomi_ginkgo/blob/main/arch/arm64/boot/dts/xiaomi/ginkgo-trinket-overlay.dts Fixes: 9b1a6c925c88 ("arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo") Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> --- arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts index 68a237215bd1..52f74f22764d 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts @@ -19,8 +19,8 @@ / { chassis-type = "handset"; /* required for bootloader to select correct board */ - qcom,msm-id = <QCOM_ID_SM6125>; - qcom,board-id = <22 0>; + qcom,msm-id = <QCOM_ID_SM6125 0x10000>; + qcom,board-id = <34 0>; chosen { #address-cells = <2>; -- 2.50.1 Konrad ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v1 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo @ 2025-03-06 0:05 kernel test robot 0 siblings, 0 replies; 21+ messages in thread From: kernel test robot @ 2025-03-06 0:05 UTC (permalink / raw) To: oe-kbuild; +Cc: lkp :::::: :::::: Manual check reason: "dtcheck: binding changes may go via different trees" :::::: BCC: lkp@intel.com CC: oe-kbuild-all@lists.linux.dev In-Reply-To: <20250304043742.9252-2-semfault@disroot.org> References: <20250304043742.9252-2-semfault@disroot.org> TO: Gabriel Gonzales <semfault@disroot.org> TO: linux-kernel@vger.kernel.org CC: Gabriel Gonzales <semfault@disroot.org> CC: Bjorn Andersson <andersson@kernel.org> CC: Konrad Dybcio <konradybcio@kernel.org> CC: Rob Herring <robh@kernel.org> CC: Krzysztof Kozlowski <krzk@kernel.org> CC: Conor Dooley <conor+dt@kernel.org> CC: Kees Cook <kees@kernel.org> CC: Tony Luck <tony.luck@intel.com> CC: "Guilherme G. Piccoli" <gpiccoli@igalia.com> CC: linux-arm-msm@vger.kernel.org CC: devicetree@vger.kernel.org CC: linux-hardening@vger.kernel.org Hi Gabriel, kernel test robot noticed the following build warnings: [auto build test WARNING on robh/for-next] [also build test WARNING on linus/master v6.14-rc5 next-20250305] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Gabriel-Gonzales/arm64-dts-qcom-sm6125-Initial-support-for-xiaomi-ginkgo/20250304-124913 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next patch link: https://lore.kernel.org/r/20250304043742.9252-2-semfault%40disroot.org patch subject: [PATCH v1 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo :::::: branch date: 2 days ago :::::: commit date: 2 days ago config: arm64-randconfig-051-20250305 (https://download.01.org/0day-ci/archive/20250306/202503060709.riVw4a7Y-lkp@intel.com/config) compiler: clang version 15.0.7 (https://github.com/llvm/llvm-project 8dfdcc7b7bf66834a761bd8de445840ef68e4d1a) dtschema version: 2025.3.dev3+gabf9328 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250306/202503060709.riVw4a7Y-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/r/202503060709.riVw4a7Y-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) arch/arm64/boot/dts/qcom/sm6125.dtsi:1321.27-1387.6: Warning (avoid_unnecessary_addr_size): /soc@0/display-subsystem@5e00000/dsi@5e94000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property arch/arm64/boot/dts/qcom/sm6125.dtsi:1279.11-1289.7: Warning (graph_child_address): /soc@0/display-subsystem@5e00000/display-controller@5e01000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary >> arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4ac0000: #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# >> arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4ac0000: #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# >> arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4cc0000: #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# >> arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dtb: geniqup@4cc0000: #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2025-08-08 9:47 UTC | newest] Thread overview: 21+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-03-04 4:37 [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales 2025-03-04 4:37 ` [PATCH v1 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales 2025-03-04 13:02 ` [PATCH v1 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Rob Herring (Arm) 2025-03-04 14:14 ` Rob Herring 2025-03-08 1:30 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Gabriel Gonzales 2025-03-08 1:30 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales 2025-03-10 9:46 ` Krzysztof Kozlowski 2025-03-08 1:30 ` [PATCH v2 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales 2025-03-08 15:11 ` Konrad Dybcio 2025-03-10 23:28 ` Gabriel Gonzales 2025-03-10 23:37 ` Konrad Dybcio 2025-03-11 0:18 ` Gabriel Gonzales 2025-03-10 14:36 ` [PATCH v2 0/2] Add Xiaomi Redmi Note 8 support Rob Herring (Arm) 2025-03-11 0:33 ` [PATCH v3 " Gabriel Gonzales 2025-03-11 0:33 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8 Gabriel Gonzales 2025-03-11 8:12 ` Krzysztof Kozlowski 2025-03-11 0:33 ` [PATCH v3 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo Gabriel Gonzales 2025-03-11 15:19 ` [PATCH v3 0/2] Add Xiaomi Redmi Note 8 support Rob Herring (Arm) 2025-03-14 20:01 ` Bjorn Andersson 2025-08-08 9:47 ` Konrad Dybcio -- strict thread matches above, loose matches on Subject: below -- 2025-03-06 0:05 [PATCH v1 2/2] arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo kernel test robot
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.