[PATCH v5 16/29] hw/intc/aspeed: Add Support for Multi-Output IRQ Handling

[Jamin Lin via <qemu-arm@nongnu.org>]

This update introduces support for handling multi-output IRQs in the AST2700
interrupt controller (INTC), specifically for GICINT192_201. GICINT192_201 maps
1:10 to input IRQ 0 and output IRQs 0 to 9. Each status bit corresponds to a
specific IRQ.

Implemented "aspeed_intc_set_irq_handler_multi_outpins" to handle IRQs with
multiple output pins. Introduced "aspeed_intc_status_handler_multi_outpins"
for managing status registers associated with multi-output IRQs.

Added new IRQ definitions for GICINT192_201 in INTC.
Adjusted the IRQ array to accommodate 10 input pins and 19 output pins,
aligning with the new GICINT192_201 mappings.

                   |------------------------------|
                   |            INTC              |
                   |inpin[0:0]--------->outpin[0] |
                   |inpin[0:1]--------->outpin[1] |
                   |inpin[0:2]--------->outpin[2] |
                   |inpin[0:3]--------->outpin[3] |
orgates[0]-------> |inpin[0:4]--------->outpin[4] |
                   |inpin[0:5]--------->outpin[5] |
                   |inpin[0:6]--------->outpin[6] |
                   |inpin[0:7]--------->outpin[7] |
                   |inpin[0:8]--------->outpin[8] |
                   |inpin[0:9]--------->outpin[9] |
                   |                              |
 orgates[1]------> |inpin[1]----------->outpin[10]|
 orgates[2]------> |inpin[2]----------->outpin[11]|
 orgates[3]------> |inpin[3]----------->outpin[12]|
 orgates[4]------> |inpin[4]----------->outpin[13]|
 orgates[5]------> |inpin[5]----------->outpin[14]|
 orgates[6]------> |inpin[6]----------->outpin[15]|
 orgates[7]------> |inpin[7]----------->outpin[16]|
 orgates[8]------> |inpin[8]----------->outpin[17]|
 orgates[9]------> |inpin[9]----------->outpin[18]|
                   |------------------------------|

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 include/hw/intc/aspeed_intc.h |   4 +-
 hw/intc/aspeed_intc.c         | 149 ++++++++++++++++++++++++++++++----
 hw/intc/trace-events          |   1 +
 3 files changed, 137 insertions(+), 17 deletions(-)

diff --git a/include/hw/intc/aspeed_intc.h b/include/hw/intc/aspeed_intc.h
index fa92e9eef2..e57f93bc8b 100644
--- a/include/hw/intc/aspeed_intc.h
+++ b/include/hw/intc/aspeed_intc.h
@@ -16,8 +16,8 @@
 #define TYPE_ASPEED_2700_INTC TYPE_ASPEED_INTC "-ast2700"
 OBJECT_DECLARE_TYPE(AspeedINTCState, AspeedINTCClass, ASPEED_INTC)
 
-#define ASPEED_INTC_MAX_INPINS 9
-#define ASPEED_INTC_MAX_OUTPINS 9
+#define ASPEED_INTC_MAX_INPINS 10
+#define ASPEED_INTC_MAX_OUTPINS 19
 
 typedef struct AspeedINTCIRQ {
     int inpin_idx;
diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
index d0b91d6420..95b65d2452 100644
--- a/hw/intc/aspeed_intc.c
+++ b/hw/intc/aspeed_intc.c
@@ -39,6 +39,8 @@ REG32(GICINT135_EN,         0x700)
 REG32(GICINT135_STATUS,     0x704)
 REG32(GICINT136_EN,         0x800)
 REG32(GICINT136_STATUS,     0x804)
+REG32(GICINT192_201_EN,         0xB00)
+REG32(GICINT192_201_STATUS,     0xB04)
 
 static const AspeedINTCIRQ *aspeed_intc_get_irq(AspeedINTCClass *aic,
                                                 uint32_t reg)
@@ -112,9 +114,55 @@ static void aspeed_intc_set_irq_handler(AspeedINTCState *s,
     }
 }
 
+static void aspeed_intc_set_irq_handler_multi_outpins(AspeedINTCState *s,
+                                 const AspeedINTCIRQ *intc_irq, uint32_t select)
+{
+    const char *name = object_get_typename(OBJECT(s));
+    uint32_t status_reg;
+    int num_outpins;
+    int outpin_idx;
+    int inpin_idx;
+    int i;
+
+    num_outpins = intc_irq->num_outpins;
+    status_reg = intc_irq->status_reg;
+    outpin_idx = intc_irq->outpin_idx;
+    inpin_idx = intc_irq->inpin_idx;
+
+    for (i = 0; i < num_outpins; i++) {
+        if (select & BIT(i)) {
+            if (s->mask[inpin_idx] & BIT(i) ||
+                s->regs[status_reg] & BIT(i)) {
+                /*
+                 * a. mask bit is not 0 means in ISR mode sources interrupt
+                 * routine are executing.
+                 * b. status bit is not 0 means previous source interrupt
+                 * does not be executed, yet.
+                 *
+                 * save source interrupt to pending bit.
+                 */
+                 s->pending[inpin_idx] |= BIT(i);
+                 trace_aspeed_intc_pending_irq(name, inpin_idx,
+                                               s->pending[inpin_idx]);
+            } else {
+                /*
+                 * notify firmware which source interrupt are coming
+                 * by setting status bit
+                 */
+                s->regs[status_reg] |= BIT(i);
+                trace_aspeed_intc_trigger_irq(name, inpin_idx, outpin_idx + i,
+                                              s->regs[status_reg]);
+                aspeed_intc_update(s, inpin_idx, outpin_idx + i, 1);
+            }
+        }
+    }
+}
+
 /*
- * GICINT128 to GICINT136 map 1:1 to input and output IRQs 0 to 8.
- * The value of input IRQ should be between 0 and the number of inputs.
+ * GICINT192_201 maps 1:10 to input IRQ 0 and output IRQs 0 to 9.
+ * GICINT128 to GICINT136 map 1:1 to input IRQs 1 to 9 and output
+ * IRQs 10 to 18. The value of input IRQ should be between 0 and
+ * the number of input pins.
  */
 static void aspeed_intc_set_irq(void *opaque, int irq, int level)
 {
@@ -124,12 +172,14 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
     const AspeedINTCIRQ *intc_irq;
     uint32_t select = 0;
     uint32_t enable;
+    int num_outpins;
     int inpin_idx;
     int i;
 
     assert(irq < aic->num_inpins);
 
     intc_irq = &aic->irq_table[irq];
+    num_outpins = intc_irq->num_outpins;
     inpin_idx = intc_irq->inpin_idx;
     trace_aspeed_intc_set_irq(name, inpin_idx, level);
     enable = s->enable[inpin_idx];
@@ -151,7 +201,11 @@ static void aspeed_intc_set_irq(void *opaque, int irq, int level)
     }
 
     trace_aspeed_intc_select(name, select);
-    aspeed_intc_set_irq_handler(s, intc_irq, select);
+    if (num_outpins > 1) {
+        aspeed_intc_set_irq_handler_multi_outpins(s, intc_irq, select);
+    } else {
+        aspeed_intc_set_irq_handler(s, intc_irq, select);
+    }
 }
 
 static void aspeed_intc_enable_handler(AspeedINTCState *s, hwaddr offset,
@@ -261,6 +315,66 @@ static void aspeed_intc_status_handler(AspeedINTCState *s, hwaddr offset,
     }
 }
 
+static void aspeed_intc_status_handler_multi_outpins(AspeedINTCState *s,
+                                                hwaddr offset, uint64_t data)
+{
+    const char *name = object_get_typename(OBJECT(s));
+    AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
+    const AspeedINTCIRQ *intc_irq;
+    uint32_t reg = offset >> 2;
+    int num_outpins;
+    int outpin_idx;
+    int inpin_idx;
+    int i;
+
+    if (!data) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid data 0\n", __func__);
+        return;
+    }
+
+    intc_irq = aspeed_intc_get_irq(aic, reg);
+    num_outpins = intc_irq->num_outpins;
+    outpin_idx = intc_irq->outpin_idx;
+    inpin_idx = intc_irq->inpin_idx;
+    assert(inpin_idx < aic->num_inpins);
+
+    /* clear status */
+    s->regs[reg] &= ~data;
+
+    /*
+     * The status registers are used for notify sources ISR are executed.
+     * If one source ISR is executed, it will clear one bit.
+     * If it clear all bits, it means to initialize this register status
+     * rather than sources ISR are executed.
+     */
+    if (data == 0xffffffff) {
+        return;
+    }
+
+    for (i = 0; i < num_outpins; i++) {
+        /* All source ISR executions are done from a specific bit */
+        if (data & BIT(i)) {
+            trace_aspeed_intc_all_isr_done_bit(name, inpin_idx, i);
+            if (s->pending[inpin_idx] & BIT(i)) {
+                /*
+                 * Handle pending source interrupt.
+                 * Notify firmware which source interrupt is pending
+                 * by setting the status bit.
+                 */
+                s->regs[reg] |= BIT(i);
+                s->pending[inpin_idx] &= ~BIT(i);
+                trace_aspeed_intc_trigger_irq(name, inpin_idx, outpin_idx + i,
+                                              s->regs[reg]);
+                aspeed_intc_update(s, inpin_idx, outpin_idx + i, 1);
+            } else {
+                /* clear irq for the specific bit */
+                trace_aspeed_intc_clear_irq(name, inpin_idx, outpin_idx + i, 0);
+                aspeed_intc_update(s, inpin_idx, outpin_idx + i, 0);
+            }
+        }
+    }
+}
+
 static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
 {
     AspeedINTCState *s = ASPEED_INTC(opaque);
@@ -293,6 +407,7 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
     case R_GICINT134_EN:
     case R_GICINT135_EN:
     case R_GICINT136_EN:
+    case R_GICINT192_201_EN:
         aspeed_intc_enable_handler(s, offset, data);
         break;
     case R_GICINT128_STATUS:
@@ -306,6 +421,9 @@ static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
     case R_GICINT136_STATUS:
         aspeed_intc_status_handler(s, offset, data);
         break;
+    case R_GICINT192_201_STATUS:
+        aspeed_intc_status_handler_multi_outpins(s, offset, data);
+        break;
     default:
         s->regs[reg] = data;
         break;
@@ -415,15 +533,16 @@ static const TypeInfo aspeed_intc_info = {
 };
 
 static AspeedINTCIRQ aspeed_2700_intc_irqs[ASPEED_INTC_MAX_INPINS] = {
-    {0, 0, 1, R_GICINT128_EN, R_GICINT128_STATUS},
-    {1, 1, 1, R_GICINT129_EN, R_GICINT129_STATUS},
-    {2, 2, 1, R_GICINT130_EN, R_GICINT130_STATUS},
-    {3, 3, 1, R_GICINT131_EN, R_GICINT131_STATUS},
-    {4, 4, 1, R_GICINT132_EN, R_GICINT132_STATUS},
-    {5, 5, 1, R_GICINT133_EN, R_GICINT133_STATUS},
-    {6, 6, 1, R_GICINT134_EN, R_GICINT134_STATUS},
-    {7, 7, 1, R_GICINT135_EN, R_GICINT135_STATUS},
-    {8, 8, 1, R_GICINT136_EN, R_GICINT136_STATUS},
+    {0, 0, 10, R_GICINT192_201_EN, R_GICINT192_201_STATUS},
+    {1, 10, 1, R_GICINT128_EN, R_GICINT128_STATUS},
+    {2, 11, 1, R_GICINT129_EN, R_GICINT129_STATUS},
+    {3, 12, 1, R_GICINT130_EN, R_GICINT130_STATUS},
+    {4, 13, 1, R_GICINT131_EN, R_GICINT131_STATUS},
+    {5, 14, 1, R_GICINT132_EN, R_GICINT132_STATUS},
+    {6, 15, 1, R_GICINT133_EN, R_GICINT133_STATUS},
+    {7, 16, 1, R_GICINT134_EN, R_GICINT134_STATUS},
+    {8, 17, 1, R_GICINT135_EN, R_GICINT135_STATUS},
+    {9, 18, 1, R_GICINT136_EN, R_GICINT136_STATUS},
 };
 
 static void aspeed_2700_intc_class_init(ObjectClass *klass, void *data)
@@ -433,10 +552,10 @@ static void aspeed_2700_intc_class_init(ObjectClass *klass, void *data)
 
     dc->desc = "ASPEED 2700 INTC Controller";
     aic->num_lines = 32;
-    aic->num_inpins = 9;
-    aic->num_outpins = 9;
+    aic->num_inpins = 10;
+    aic->num_outpins = 19;
     aic->mem_size = 0x4000;
-    aic->reg_size = 0x808 >> 2;
+    aic->reg_size = 0xB08 >> 2;
     aic->reg_offset = 0x1000;
     aic->irq_table = aspeed_2700_intc_irqs;
     aic->irq_table_count = ARRAY_SIZE(aspeed_2700_intc_irqs);
diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index e97eea820b..913197a181 100644
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -92,6 +92,7 @@ aspeed_intc_enable(const char *s, uint32_t value) "%s: Enable: 0x%x"
 aspeed_intc_select(const char *s, uint32_t value) "%s: Select: 0x%x"
 aspeed_intc_mask(const char *s, uint32_t change, uint32_t value) "%s: Mask: 0x%x: 0x%x"
 aspeed_intc_unmask(const char *s, uint32_t change, uint32_t value) "%s: UnMask: 0x%x: 0x%x"
+aspeed_intc_all_isr_done_bit(const char *s, int inpin_idx, int bit) "%s: All source ISR execution are done from specific bit: %d-%d"
 
 # arm_gic.c
 gic_enable_irq(int irq) "irq %d enabled"
-- 
2.43.0