All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Nicholas Piggin" <npiggin@gmail.com>,
	qemu-ppc@nongnu.org, "Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Harsh Prateek Bora" <harshpb@linux.ibm.com>
Subject: [PULL 44/72] target/ppc: Move TCG specific exception handlers to tcg-excp_helper.c
Date: Tue, 11 Mar 2025 22:57:38 +1000	[thread overview]
Message-ID: <20250311125815.903177-45-npiggin@gmail.com> (raw)
In-Reply-To: <20250311125815.903177-1-npiggin@gmail.com>

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Move the TCGCPUOps handlers to a new unit: tcg-excp_helper.c,
only built when TCG is selected.

See in target/ppc/cpu_init.c:

    #ifdef CONFIG_TCG
    static const TCGCPUOps ppc_tcg_ops = {
      ...
      .do_unaligned_access = ppc_cpu_do_unaligned_access,
      .do_transaction_failed = ppc_cpu_do_transaction_failed,
      .debug_excp_handler = ppc_cpu_debug_excp_handler,
      .debug_check_breakpoint = ppc_cpu_debug_check_breakpoint,
      .debug_check_watchpoint = ppc_cpu_debug_check_watchpoint,
    };
    #endif /* CONFIG_TCG */

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-5-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 target/ppc/excp_helper.c     | 173 ------------------------------
 target/ppc/meson.build       |   1 +
 target/ppc/tcg-excp_helper.c | 202 +++++++++++++++++++++++++++++++++++
 3 files changed, 203 insertions(+), 173 deletions(-)
 create mode 100644 target/ppc/tcg-excp_helper.c

diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 7ed4bbec03..b05eb7f5ae 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -3144,178 +3144,5 @@ void helper_book3s_trace(CPUPPCState *env, target_ulong prev_ip)
     raise_exception_err(env, POWERPC_EXCP_TRACE, error_code);
 }
 
-void ppc_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
-                                 MMUAccessType access_type,
-                                 int mmu_idx, uintptr_t retaddr)
-{
-    CPUPPCState *env = cpu_env(cs);
-    uint32_t insn;
-
-    /* Restore state and reload the insn we executed, for filling in DSISR.  */
-    cpu_restore_state(cs, retaddr);
-    insn = ppc_ldl_code(env, env->nip);
-
-    switch (env->mmu_model) {
-    case POWERPC_MMU_SOFT_4xx:
-        env->spr[SPR_40x_DEAR] = vaddr;
-        break;
-    case POWERPC_MMU_BOOKE:
-    case POWERPC_MMU_BOOKE206:
-        env->spr[SPR_BOOKE_DEAR] = vaddr;
-        break;
-    default:
-        env->spr[SPR_DAR] = vaddr;
-        break;
-    }
-
-    cs->exception_index = POWERPC_EXCP_ALIGN;
-    env->error_code = insn & 0x03FF0000;
-    cpu_loop_exit(cs);
-}
-
-void ppc_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
-                                   vaddr vaddr, unsigned size,
-                                   MMUAccessType access_type,
-                                   int mmu_idx, MemTxAttrs attrs,
-                                   MemTxResult response, uintptr_t retaddr)
-{
-    CPUPPCState *env = cpu_env(cs);
-
-    switch (env->excp_model) {
-#if defined(TARGET_PPC64)
-    case POWERPC_EXCP_POWER8:
-    case POWERPC_EXCP_POWER9:
-    case POWERPC_EXCP_POWER10:
-    case POWERPC_EXCP_POWER11:
-        /*
-         * Machine check codes can be found in processor User Manual or
-         * Linux or skiboot source.
-         */
-        if (access_type == MMU_DATA_LOAD) {
-            env->spr[SPR_DAR] = vaddr;
-            env->spr[SPR_DSISR] = PPC_BIT(57);
-            env->error_code = PPC_BIT(42);
-
-        } else if (access_type == MMU_DATA_STORE) {
-            /*
-             * MCE for stores in POWER is asynchronous so hardware does
-             * not set DAR, but QEMU can do better.
-             */
-            env->spr[SPR_DAR] = vaddr;
-            env->error_code = PPC_BIT(36) | PPC_BIT(43) | PPC_BIT(45);
-            env->error_code |= PPC_BIT(42);
-
-        } else { /* Fetch */
-            /*
-             * is_prefix_insn_excp() tests !PPC_BIT(42) to avoid fetching
-             * the instruction, so that must always be clear for fetches.
-             */
-            env->error_code = PPC_BIT(36) | PPC_BIT(44) | PPC_BIT(45);
-        }
-        break;
-#endif
-    default:
-        /*
-         * TODO: Check behaviour for other CPUs, for now do nothing.
-         * Could add a basic MCE even if real hardware ignores.
-         */
-        return;
-    }
-
-    cs->exception_index = POWERPC_EXCP_MCHECK;
-    cpu_loop_exit_restore(cs, retaddr);
-}
-
-void ppc_cpu_debug_excp_handler(CPUState *cs)
-{
-#if defined(TARGET_PPC64)
-    CPUPPCState *env = cpu_env(cs);
-
-    if (env->insns_flags2 & PPC2_ISA207S) {
-        if (cs->watchpoint_hit) {
-            if (cs->watchpoint_hit->flags & BP_CPU) {
-                env->spr[SPR_DAR] = cs->watchpoint_hit->hitaddr;
-                env->spr[SPR_DSISR] = PPC_BIT(41);
-                cs->watchpoint_hit = NULL;
-                raise_exception(env, POWERPC_EXCP_DSI);
-            }
-            cs->watchpoint_hit = NULL;
-        } else if (cpu_breakpoint_test(cs, env->nip, BP_CPU)) {
-            raise_exception_err(env, POWERPC_EXCP_TRACE,
-                                PPC_BIT(33) | PPC_BIT(43));
-        }
-    }
-#endif
-}
-
-bool ppc_cpu_debug_check_breakpoint(CPUState *cs)
-{
-#if defined(TARGET_PPC64)
-    CPUPPCState *env = cpu_env(cs);
-
-    if (env->insns_flags2 & PPC2_ISA207S) {
-        target_ulong priv;
-
-        priv = env->spr[SPR_CIABR] & PPC_BITMASK(62, 63);
-        switch (priv) {
-        case 0x1: /* problem */
-            return env->msr & ((target_ulong)1 << MSR_PR);
-        case 0x2: /* supervisor */
-            return (!(env->msr & ((target_ulong)1 << MSR_PR)) &&
-                    !(env->msr & ((target_ulong)1 << MSR_HV)));
-        case 0x3: /* hypervisor */
-            return (!(env->msr & ((target_ulong)1 << MSR_PR)) &&
-                     (env->msr & ((target_ulong)1 << MSR_HV)));
-        default:
-            g_assert_not_reached();
-        }
-    }
-#endif
-
-    return false;
-}
-
-bool ppc_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp)
-{
-#if defined(TARGET_PPC64)
-    CPUPPCState *env = cpu_env(cs);
-
-    if (env->insns_flags2 & PPC2_ISA207S) {
-        if (wp == env->dawr0_watchpoint) {
-            uint32_t dawrx = env->spr[SPR_DAWRX0];
-            bool wt = extract32(dawrx, PPC_BIT_NR(59), 1);
-            bool wti = extract32(dawrx, PPC_BIT_NR(60), 1);
-            bool hv = extract32(dawrx, PPC_BIT_NR(61), 1);
-            bool sv = extract32(dawrx, PPC_BIT_NR(62), 1);
-            bool pr = extract32(dawrx, PPC_BIT_NR(62), 1);
-
-            if ((env->msr & ((target_ulong)1 << MSR_PR)) && !pr) {
-                return false;
-            } else if ((env->msr & ((target_ulong)1 << MSR_HV)) && !hv) {
-                return false;
-            } else if (!sv) {
-                return false;
-            }
-
-            if (!wti) {
-                if (env->msr & ((target_ulong)1 << MSR_DR)) {
-                    if (!wt) {
-                        return false;
-                    }
-                } else {
-                    if (wt) {
-                        return false;
-                    }
-                }
-            }
-
-            return true;
-        }
-    }
-#endif
-
-    return false;
-}
-
 #endif /* !CONFIG_USER_ONLY */
 #endif /* CONFIG_TCG */
diff --git a/target/ppc/meson.build b/target/ppc/meson.build
index db3b7a0c33..8eed1fa40c 100644
--- a/target/ppc/meson.build
+++ b/target/ppc/meson.build
@@ -14,6 +14,7 @@ ppc_ss.add(when: 'CONFIG_TCG', if_true: files(
   'int_helper.c',
   'mem_helper.c',
   'misc_helper.c',
+  'tcg-excp_helper.c',
   'timebase_helper.c',
   'translate.c',
   'power8-pmu.c',
diff --git a/target/ppc/tcg-excp_helper.c b/target/ppc/tcg-excp_helper.c
new file mode 100644
index 0000000000..3402dbe05e
--- /dev/null
+++ b/target/ppc/tcg-excp_helper.c
@@ -0,0 +1,202 @@
+/*
+ *  PowerPC exception emulation helpers for QEMU (TCG specific)
+ *
+ *  Copyright (c) 2003-2007 Jocelyn Mayer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qemu/osdep.h"
+#include "exec/cpu_ldst.h"
+
+#include "hw/ppc/ppc.h"
+#include "internal.h"
+#include "cpu.h"
+#include "trace.h"
+
+#ifndef CONFIG_USER_ONLY
+
+void ppc_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
+                                 MMUAccessType access_type,
+                                 int mmu_idx, uintptr_t retaddr)
+{
+    CPUPPCState *env = cpu_env(cs);
+    uint32_t insn;
+
+    /* Restore state and reload the insn we executed, for filling in DSISR.  */
+    cpu_restore_state(cs, retaddr);
+    insn = ppc_ldl_code(env, env->nip);
+
+    switch (env->mmu_model) {
+    case POWERPC_MMU_SOFT_4xx:
+        env->spr[SPR_40x_DEAR] = vaddr;
+        break;
+    case POWERPC_MMU_BOOKE:
+    case POWERPC_MMU_BOOKE206:
+        env->spr[SPR_BOOKE_DEAR] = vaddr;
+        break;
+    default:
+        env->spr[SPR_DAR] = vaddr;
+        break;
+    }
+
+    cs->exception_index = POWERPC_EXCP_ALIGN;
+    env->error_code = insn & 0x03FF0000;
+    cpu_loop_exit(cs);
+}
+
+void ppc_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
+                                   vaddr vaddr, unsigned size,
+                                   MMUAccessType access_type,
+                                   int mmu_idx, MemTxAttrs attrs,
+                                   MemTxResult response, uintptr_t retaddr)
+{
+    CPUPPCState *env = cpu_env(cs);
+
+    switch (env->excp_model) {
+#if defined(TARGET_PPC64)
+    case POWERPC_EXCP_POWER8:
+    case POWERPC_EXCP_POWER9:
+    case POWERPC_EXCP_POWER10:
+    case POWERPC_EXCP_POWER11:
+        /*
+         * Machine check codes can be found in processor User Manual or
+         * Linux or skiboot source.
+         */
+        if (access_type == MMU_DATA_LOAD) {
+            env->spr[SPR_DAR] = vaddr;
+            env->spr[SPR_DSISR] = PPC_BIT(57);
+            env->error_code = PPC_BIT(42);
+
+        } else if (access_type == MMU_DATA_STORE) {
+            /*
+             * MCE for stores in POWER is asynchronous so hardware does
+             * not set DAR, but QEMU can do better.
+             */
+            env->spr[SPR_DAR] = vaddr;
+            env->error_code = PPC_BIT(36) | PPC_BIT(43) | PPC_BIT(45);
+            env->error_code |= PPC_BIT(42);
+
+        } else { /* Fetch */
+            /*
+             * is_prefix_insn_excp() tests !PPC_BIT(42) to avoid fetching
+             * the instruction, so that must always be clear for fetches.
+             */
+            env->error_code = PPC_BIT(36) | PPC_BIT(44) | PPC_BIT(45);
+        }
+        break;
+#endif
+    default:
+        /*
+         * TODO: Check behaviour for other CPUs, for now do nothing.
+         * Could add a basic MCE even if real hardware ignores.
+         */
+        return;
+    }
+
+    cs->exception_index = POWERPC_EXCP_MCHECK;
+    cpu_loop_exit_restore(cs, retaddr);
+}
+
+void ppc_cpu_debug_excp_handler(CPUState *cs)
+{
+#if defined(TARGET_PPC64)
+    CPUPPCState *env = cpu_env(cs);
+
+    if (env->insns_flags2 & PPC2_ISA207S) {
+        if (cs->watchpoint_hit) {
+            if (cs->watchpoint_hit->flags & BP_CPU) {
+                env->spr[SPR_DAR] = cs->watchpoint_hit->hitaddr;
+                env->spr[SPR_DSISR] = PPC_BIT(41);
+                cs->watchpoint_hit = NULL;
+                raise_exception(env, POWERPC_EXCP_DSI);
+            }
+            cs->watchpoint_hit = NULL;
+        } else if (cpu_breakpoint_test(cs, env->nip, BP_CPU)) {
+            raise_exception_err(env, POWERPC_EXCP_TRACE,
+                                PPC_BIT(33) | PPC_BIT(43));
+        }
+    }
+#endif
+}
+
+bool ppc_cpu_debug_check_breakpoint(CPUState *cs)
+{
+#if defined(TARGET_PPC64)
+    CPUPPCState *env = cpu_env(cs);
+
+    if (env->insns_flags2 & PPC2_ISA207S) {
+        target_ulong priv;
+
+        priv = env->spr[SPR_CIABR] & PPC_BITMASK(62, 63);
+        switch (priv) {
+        case 0x1: /* problem */
+            return env->msr & ((target_ulong)1 << MSR_PR);
+        case 0x2: /* supervisor */
+            return (!(env->msr & ((target_ulong)1 << MSR_PR)) &&
+                    !(env->msr & ((target_ulong)1 << MSR_HV)));
+        case 0x3: /* hypervisor */
+            return (!(env->msr & ((target_ulong)1 << MSR_PR)) &&
+                     (env->msr & ((target_ulong)1 << MSR_HV)));
+        default:
+            g_assert_not_reached();
+        }
+    }
+#endif
+
+    return false;
+}
+
+bool ppc_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp)
+{
+#if defined(TARGET_PPC64)
+    CPUPPCState *env = cpu_env(cs);
+
+    if (env->insns_flags2 & PPC2_ISA207S) {
+        if (wp == env->dawr0_watchpoint) {
+            uint32_t dawrx = env->spr[SPR_DAWRX0];
+            bool wt = extract32(dawrx, PPC_BIT_NR(59), 1);
+            bool wti = extract32(dawrx, PPC_BIT_NR(60), 1);
+            bool hv = extract32(dawrx, PPC_BIT_NR(61), 1);
+            bool sv = extract32(dawrx, PPC_BIT_NR(62), 1);
+            bool pr = extract32(dawrx, PPC_BIT_NR(62), 1);
+
+            if ((env->msr & ((target_ulong)1 << MSR_PR)) && !pr) {
+                return false;
+            } else if ((env->msr & ((target_ulong)1 << MSR_HV)) && !hv) {
+                return false;
+            } else if (!sv) {
+                return false;
+            }
+
+            if (!wti) {
+                if (env->msr & ((target_ulong)1 << MSR_DR)) {
+                    if (!wt) {
+                        return false;
+                    }
+                } else {
+                    if (wt) {
+                        return false;
+                    }
+                }
+            }
+
+            return true;
+        }
+    }
+#endif
+
+    return false;
+}
+
+#endif /* !CONFIG_USER_ONLY */
-- 
2.47.1



  parent reply	other threads:[~2025-03-11 13:24 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-11 12:56 [PULL 00/72] ppc-for-10.0-1 queue Nicholas Piggin
2025-03-11 12:56 ` [PULL 01/72] ppc/ppc405: Remove tests Nicholas Piggin
2025-03-11 12:56 ` [PULL 02/72] ppc/ppc405: Remove boards Nicholas Piggin
2025-03-11 12:56 ` [PULL 03/72] hw/ppc: Deprecate 405 CPUs Nicholas Piggin
2025-03-11 12:56 ` [PULL 04/72] ppc/pnv: Update skiboot to 7.1-106 Nicholas Piggin
2025-03-11 12:56 ` [PULL 05/72] pseries: Update SLOF firmware image Nicholas Piggin
2025-03-11 12:57 ` [PULL 06/72] ppc/pnv/phb4: Add pervasive chiplet support to PHB4/5 Nicholas Piggin
2025-03-11 12:57 ` [PULL 07/72] ppc/pnv/homer: Fix OCC registers Nicholas Piggin
2025-03-11 12:57 ` [PULL 08/72] ppc/pnv/homer: Make dummy reads return 0 Nicholas Piggin
2025-03-11 12:57 ` [PULL 09/72] ppc/pnv/occ: Fix common area sensor offsets Nicholas Piggin
2025-03-13  7:57   ` Michael Tokarev
2025-03-11 12:57 ` [PULL 10/72] ppc/pnv/homer: class-based base and size Nicholas Piggin
2025-03-11 12:57 ` [PULL 11/72] ppc/pnv/occ: Better document OCCMISC bits Nicholas Piggin
2025-03-11 12:57 ` [PULL 12/72] ppc/pnv: Make HOMER memory a RAM region Nicholas Piggin
2025-03-11 12:57 ` [PULL 13/72] ppc/pnv/occ: Update pstate frequency tables Nicholas Piggin
2025-03-11 12:57 ` [PULL 14/72] ppc/pnv/occ: Add POWER10 OCC-OPAL data format Nicholas Piggin
2025-03-11 12:57 ` [PULL 15/72] ppc/pnv/occ: Implement a basic dynamic OCC model Nicholas Piggin
2025-03-11 12:57 ` [PULL 16/72] target/ppc: Add Power9/10 power management SPRs Nicholas Piggin
2025-03-11 12:57 ` [PULL 17/72] ppc/pnv: Support LPC host controller irqs other than serirqs Nicholas Piggin
2025-03-11 12:57 ` [PULL 18/72] ppc/pnv: raise no-response errors if an LPC transaction fails Nicholas Piggin
2025-03-11 12:57 ` [PULL 19/72] ppc/pnv: Implement LPC FW address space IDSEL Nicholas Piggin
2025-03-11 12:57 ` [PULL 20/72] ppc/pnv: Move PNOR to offset 0 in the ISA FW space Nicholas Piggin
2025-03-11 12:57 ` [PULL 21/72] ppc/pnv: Add a PNOR address and size sanity checks Nicholas Piggin
2025-03-11 12:57 ` [PULL 22/72] ppc/pnv: Add a default formatted PNOR image Nicholas Piggin
2025-03-11 12:57 ` [PULL 23/72] ppc/xive2: Update NVP save/restore for group attributes Nicholas Piggin
2025-03-11 12:57 ` [PULL 24/72] ppc/xive: Rename ipb_to_pipr() to xive_ipb_to_pipr() Nicholas Piggin
2025-03-11 12:57 ` [PULL 25/72] ppc/xive2: Add grouping level to notification Nicholas Piggin
2025-03-11 12:57 ` [PULL 26/72] ppc/xive2: Support group-matching when looking for target Nicholas Piggin
2025-03-11 12:57 ` [PULL 27/72] ppc/xive2: Add undelivered group interrupt to backlog Nicholas Piggin
2025-03-11 12:57 ` [PULL 28/72] ppc/xive2: Process group backlog when pushing an OS context Nicholas Piggin
2025-03-11 12:57 ` [PULL 29/72] ppc/xive2: Process group backlog when updating the CPPR Nicholas Piggin
2025-03-11 12:57 ` [PULL 30/72] qtest/xive: Add group-interrupt test Nicholas Piggin
2025-03-11 12:57 ` [PULL 31/72] ppc/xive2: Add support for MMIO operations on the NVPG/NVC BAR Nicholas Piggin
2025-03-11 12:57 ` [PULL 32/72] ppc/xive2: Support crowd-matching when looking for target Nicholas Piggin
2025-03-11 12:57 ` [PULL 33/72] pnv/xive2: Rename nvp_ to nvx_ if they can refer to NVP or NVGC Nicholas Piggin
2025-03-11 12:57 ` [PULL 34/72] ppc/xive2: Check crowd backlog when scanning group backlog Nicholas Piggin
2025-03-11 12:57 ` [PULL 35/72] qtest/xive: Change printf to g_test_message Nicholas Piggin
2025-03-11 12:57 ` [PULL 36/72] qtest/xive: Add test of pool interrupts Nicholas Piggin
2025-03-11 12:57 ` [PULL 37/72] hw/ssi/pnv_spi: Replace PnvXferBuffer with Fifo8 structure Nicholas Piggin
2025-03-11 12:57 ` [PULL 38/72] hw/ssi/pnv_spi: Use local var seq_index instead of get_seq_index() Nicholas Piggin
2025-03-11 12:57 ` [PULL 39/72] hw/ssi/pnv_spi: Make bus names distinct for each controllers of a socket Nicholas Piggin
2025-03-11 12:57 ` [PULL 40/72] hw/ssi/pnv_spi: Put a limit to RDR match failures Nicholas Piggin
2025-03-11 12:57 ` [PULL 41/72] hw/ppc/spapr: Restrict CONFER hypercall to TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 42/72] ppc/pnv: Add new PowerPC Special Purpose Registers (RWMR) Nicholas Piggin
2025-03-11 12:57 ` [PULL 43/72] target/ppc: Make ppc_ldl_code() declaration public Nicholas Piggin
2025-03-11 12:57 ` Nicholas Piggin [this message]
2025-03-11 12:57 ` [PULL 45/72] target/ppc: Move ppc_ldl_code() to tcg-excp_helper.c Nicholas Piggin
2025-03-11 12:57 ` [PULL 46/72] target/ppc: Ensure powerpc_mcheck_checkstop() is only called under TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 47/72] target/ppc: Restrict powerpc_checkstop() to TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 48/72] target/ppc: Remove raise_exception_ra() Nicholas Piggin
2025-03-11 12:57 ` [PULL 49/72] target/ppc: Restrict exception helpers to TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 50/72] target/ppc: Restrict various common " Nicholas Piggin
2025-03-11 12:57 ` [PULL 51/72] target/ppc: Fix style in excp_helper.c Nicholas Piggin
2025-03-11 12:57 ` [PULL 52/72] target/ppc: Make powerpc_excp() prototype public Nicholas Piggin
2025-03-11 12:57 ` [PULL 53/72] target/ppc: Restrict ATTN / SCV / PMINSN helpers to TCG Nicholas Piggin
2025-03-11 12:57 ` [PULL 54/72] hw/ppc/spapr: Convert HPTE() macro as hpte_get_ptr() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 55/72] hw/ppc/spapr: Convert HPTE_VALID() macro as hpte_is_valid() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 56/72] hw/ppc/spapr: Convert HPTE_DIRTY() macro as hpte_is_dirty() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 57/72] hw/ppc/spapr: Convert CLEAN_HPTE() macro as hpte_set_clean() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 58/72] hw/ppc/spapr: Convert DIRTY_HPTE() macro as hpte_set_dirty() method Nicholas Piggin
2025-03-11 12:57 ` [PULL 59/72] hw/ppc/epapr: Do not swap ePAPR magic value Nicholas Piggin
2025-03-11 12:57 ` [PULL 60/72] ppc: Enable 2nd DAWR support on Power10 PowerNV machine Nicholas Piggin
2025-03-11 12:57 ` [PULL 61/72] ppc: spapr: Enable 2nd DAWR on Power10 pSeries machine Nicholas Piggin
2025-03-11 12:57 ` [PULL 62/72] spapr: nested: Add support for reporting Hostwide state counter Nicholas Piggin
2025-03-11 12:57 ` [PULL 63/72] target/ppc: fix timebase register reset state Nicholas Piggin
2025-03-11 12:57 ` [PULL 64/72] target/ppc: Wire up BookE ATB registers for e500 family Nicholas Piggin
2025-03-11 12:57 ` [PULL 65/72] target/ppc: Avoid warning message for zero process table entries Nicholas Piggin
2025-03-11 12:58 ` [PULL 66/72] spapr: Generate random HASHPKEYR for spapr machines Nicholas Piggin
2025-03-11 12:58 ` [PULL 67/72] ppc/amigaone: Simplify replacement dummy_fw Nicholas Piggin
2025-03-11 12:58 ` [PULL 68/72] ppc/amigaone: Implement NVRAM emulation Nicholas Piggin
2025-03-11 12:58 ` [PULL 69/72] ppc/amigaone: Add default environment Nicholas Piggin
2025-03-11 12:58 ` [PULL 70/72] ppc/amigaone: Add kernel and initrd support Nicholas Piggin
2025-06-16 10:07   ` Philippe Mathieu-Daudé
2025-06-16 10:38     ` BALATON Zoltan
2025-10-21 15:36   ` Peter Maydell
2025-03-11 12:58 ` [PULL 71/72] ppc/amigaone: Add #defines for memory map constants Nicholas Piggin
2025-03-11 12:58 ` [PULL 72/72] docs/system/ppc/amigang.rst: Update for NVRAM emulation Nicholas Piggin
2025-03-13  2:34 ` [PULL 00/72] ppc-for-10.0-1 queue Stefan Hajnoczi
2025-03-13  6:13   ` Thomas Huth
2025-03-13 10:49     ` Philippe Mathieu-Daudé
2025-03-14  2:34       ` Nicholas Piggin
2025-03-14  6:19         ` Thomas Huth
2025-03-14  2:41       ` Nicholas Piggin
2025-03-13  7:05 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250311125815.903177-45-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=harshpb@linux.ibm.com \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.