All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lothar Rubusch <l.rubusch@gmail.com>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	eraretuya@gmail.com, l.rubusch@gmail.com
Subject: [PATCH v4 09/14] iio: accel: adxl345: extend sample frequency adjustments
Date: Thu, 13 Mar 2025 16:50:44 +0000	[thread overview]
Message-ID: <20250313165049.48305-10-l.rubusch@gmail.com> (raw)
In-Reply-To: <20250313165049.48305-1-l.rubusch@gmail.com>

Introduce enums and functions to work with the sample frequency
adjustments. Let the sample frequency adjust via IIO and configure
a reasonable default.

Replace the old static sample frequency handling. The patch is in
preparation for activity/inactivity handling. During adjustment of
bw registers, measuring is disabled and afterwards enabled again.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345.h      |   2 +-
 drivers/iio/accel/adxl345_core.c | 156 ++++++++++++++++++++++++-------
 2 files changed, 124 insertions(+), 34 deletions(-)

diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
index 7d482dd595fa..6c1f96406136 100644
--- a/drivers/iio/accel/adxl345.h
+++ b/drivers/iio/accel/adxl345.h
@@ -69,7 +69,7 @@
  * BW_RATE bits - Bandwidth and output data rate. The default value is
  * 0x0A, which translates to a 100 Hz output data rate
  */
-#define ADXL345_BW_RATE			GENMASK(3, 0)
+#define ADXL345_BW_RATE_MSK		GENMASK(3, 0)
 #define ADXL345_BW_LOW_POWER		BIT(4)
 #define ADXL345_BASE_RATE_NANO_HZ	97656250LL
 
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 1a2bf0c630c9..4c5084497def 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -67,6 +67,45 @@ static const unsigned int adxl345_tap_time_reg[] = {
 	[ADXL345_TAP_TIME_DUR] = ADXL345_REG_DUR,
 };
 
+enum adxl345_odr {
+	ADXL345_ODR_0P10HZ = 0,
+	ADXL345_ODR_0P20HZ,
+	ADXL345_ODR_0P39HZ,
+	ADXL345_ODR_0P78HZ,
+	ADXL345_ODR_1P56HZ,
+	ADXL345_ODR_3P13HZ,
+	ADXL345_ODR_6P25HZ,
+	ADXL345_ODR_12P50HZ,
+	ADXL345_ODR_25HZ,
+	ADXL345_ODR_50HZ,
+	ADXL345_ODR_100HZ,
+	ADXL345_ODR_200HZ,
+	ADXL345_ODR_400HZ,
+	ADXL345_ODR_800HZ,
+	ADXL345_ODR_1600HZ,
+	ADXL345_ODR_3200HZ,
+};
+
+/* Certain features recommend 12.5 Hz - 400 Hz ODR */
+static const int adxl345_odr_tbl[][2] = {
+	[ADXL345_ODR_0P10HZ]	= {    0,  97000 },
+	[ADXL345_ODR_0P20HZ]	= {    0, 195000 },
+	[ADXL345_ODR_0P39HZ]	= {    0, 390000 },
+	[ADXL345_ODR_0P78HZ]	= {    0, 781000 },
+	[ADXL345_ODR_1P56HZ]	= {    1, 562000 },
+	[ADXL345_ODR_3P13HZ]	= {    3, 125000 },
+	[ADXL345_ODR_6P25HZ]	= {    6, 250000 },
+	[ADXL345_ODR_12P50HZ]	= {   12, 500000 },
+	[ADXL345_ODR_25HZ]	= {   25, 0 },
+	[ADXL345_ODR_50HZ]	= {   50, 0 },
+	[ADXL345_ODR_100HZ]	= {  100, 0 },
+	[ADXL345_ODR_200HZ]	= {  200, 0 },
+	[ADXL345_ODR_400HZ]	= {  400, 0 },
+	[ADXL345_ODR_800HZ]	= {  800, 0 },
+	[ADXL345_ODR_1600HZ]	= { 1600, 0 },
+	[ADXL345_ODR_3200HZ]	= { 3200, 0 },
+};
+
 struct adxl345_state {
 	const struct adxl345_chip_info *info;
 	struct regmap *regmap;
@@ -119,6 +158,7 @@ static struct iio_event_spec adxl345_events[] = {
 		BIT(IIO_CHAN_INFO_CALIBBIAS),				\
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
 		BIT(IIO_CHAN_INFO_SAMP_FREQ),				\
+	.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),		\
 	.scan_index = (index),				\
 	.scan_type = {					\
 		.sign = 's',				\
@@ -446,14 +486,59 @@ static int adxl345_set_ff_time(struct adxl345_state *st, u32 val_int,
 	return regmap_write(st->regmap, ADXL345_REG_TIME_FF, min(regval, 0xff));
 }
 
+static int adxl345_find_odr(struct adxl345_state *st, int val,
+			    int val2, enum adxl345_odr *odr)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(adxl345_odr_tbl); i++) {
+		if (val == adxl345_odr_tbl[i][0] &&
+		    val2 == adxl345_odr_tbl[i][1]) {
+			*odr = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int adxl345_set_odr(struct adxl345_state *st, enum adxl345_odr odr)
+{
+	int ret;
+
+	ret = regmap_update_bits(st->regmap, ADXL345_REG_BW_RATE,
+				 ADXL345_BW_RATE_MSK,
+				 FIELD_PREP(ADXL345_BW_RATE_MSK, odr));
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int adxl345_read_avail(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      const int **vals, int *type,
+			      int *length, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = (int *)adxl345_odr_tbl;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = ARRAY_SIZE(adxl345_odr_tbl) * 2;
+		return IIO_AVAIL_LIST;
+	}
+
+	return -EINVAL;
+}
+
 static int adxl345_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int *val, int *val2, long mask)
 {
 	struct adxl345_state *st = iio_priv(indio_dev);
 	__le16 accel;
-	long long samp_freq_nhz;
 	unsigned int regval;
+	enum adxl345_odr odr;
 	int ret;
 
 	switch (mask) {
@@ -491,12 +576,10 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
 		ret = regmap_read(st->regmap, ADXL345_REG_BW_RATE, &regval);
 		if (ret)
 			return ret;
-
-		samp_freq_nhz = ADXL345_BASE_RATE_NANO_HZ <<
-				(regval & ADXL345_BW_RATE);
-		*val = div_s64_rem(samp_freq_nhz, NANOHZ_PER_HZ, val2);
-
-		return IIO_VAL_INT_PLUS_NANO;
+		odr = FIELD_GET(ADXL345_BW_RATE_MSK, regval);
+		*val = adxl345_odr_tbl[odr][0];
+		*val2 = adxl345_odr_tbl[odr][1];
+		return IIO_VAL_INT_PLUS_MICRO;
 	}
 
 	return -EINVAL;
@@ -507,7 +590,12 @@ static int adxl345_write_raw(struct iio_dev *indio_dev,
 			     int val, int val2, long mask)
 {
 	struct adxl345_state *st = iio_priv(indio_dev);
-	s64 n;
+	enum adxl345_odr odr;
+	int ret;
+
+	ret = adxl345_set_measure_en(st, false);
+	if (ret)
+		return ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_CALIBBIAS:
@@ -515,20 +603,26 @@ static int adxl345_write_raw(struct iio_dev *indio_dev,
 		 * 8-bit resolution at +/- 2g, that is 4x accel data scale
 		 * factor
 		 */
-		return regmap_write(st->regmap,
-				    ADXL345_REG_OFS_AXIS(chan->address),
-				    val / 4);
+		ret = regmap_write(st->regmap,
+				   ADXL345_REG_OFS_AXIS(chan->address),
+				   val / 4);
+		if (ret)
+			return ret;
+		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		n = div_s64(val * NANOHZ_PER_HZ + val2,
-			    ADXL345_BASE_RATE_NANO_HZ);
+		ret = adxl345_find_odr(st, val, val2, &odr);
+		if (ret)
+			return ret;
 
-		return regmap_update_bits(st->regmap, ADXL345_REG_BW_RATE,
-					  ADXL345_BW_RATE,
-					  clamp_val(ilog2(n), 0,
-						    ADXL345_BW_RATE));
+		ret = adxl345_set_odr(st, odr);
+		if (ret)
+			return ret;
+		break;
+	default:
+		return -EINVAL;
 	}
 
-	return -EINVAL;
+	return adxl345_set_measure_en(st, true);
 }
 
 static int adxl345_read_event_config(struct iio_dev *indio_dev,
@@ -754,7 +848,7 @@ static int adxl345_write_raw_get_fmt(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_CALIBBIAS:
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		return IIO_VAL_INT_PLUS_NANO;
+		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
 	}
@@ -767,19 +861,6 @@ static void adxl345_powerdown(void *ptr)
 	adxl345_set_measure_en(st, false);
 }
 
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
-"0.09765625 0.1953125 0.390625 0.78125 1.5625 3.125 6.25 12.5 25 50 100 200 400 800 1600 3200"
-);
-
-static struct attribute *adxl345_attrs[] = {
-	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group adxl345_attrs_group = {
-	.attrs = adxl345_attrs,
-};
-
 static int adxl345_set_fifo(struct adxl345_state *st)
 {
 	unsigned int intio;
@@ -1040,9 +1121,9 @@ static irqreturn_t adxl345_irq_handler(int irq, void *p)
 }
 
 static const struct iio_info adxl345_info = {
-	.attrs		= &adxl345_attrs_group,
 	.read_raw	= adxl345_read_raw,
 	.write_raw	= adxl345_write_raw,
+	.read_avail	= adxl345_read_avail,
 	.write_raw_get_fmt	= adxl345_write_raw_get_fmt,
 	.read_event_config = adxl345_read_event_config,
 	.write_event_config = adxl345_write_event_config,
@@ -1112,6 +1193,15 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
 	indio_dev->available_scan_masks = adxl345_scan_masks;
 
+	/*
+	 * Using I2C at 100kHz would limit the maximum ODR to 200Hz, operation
+	 * at an output rate above the recommended maximum may result in
+	 * undesired behavior.
+	 */
+	ret = adxl345_set_odr(st, ADXL345_ODR_200HZ);
+	if (ret)
+		return ret;
+
 	/* Reset interrupts at start up */
 	ret = regmap_write(st->regmap, ADXL345_REG_INT_ENABLE, 0x00);
 	if (ret)
-- 
2.39.5


  parent reply	other threads:[~2025-03-13 16:51 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-13 16:50 [PATCH v4 00/14] iio: accel: adxl345: add interrupt based sensor events Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 01/14] iio: accel: adxl345: use regmap cache for INT mapping Lothar Rubusch
2025-03-16 11:06   ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 02/14] iio: accel: adxl345: move INT enable to regmap cache Lothar Rubusch
2025-03-16 11:11   ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 03/14] iio: accel: adxl345: cleanup regmap return values Lothar Rubusch
2025-03-16 11:12   ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 04/14] iio: accel: adxl345: introduce adxl345_push_event function Lothar Rubusch
2025-03-16 11:14   ` Jonathan Cameron
2025-03-16 19:58   ` Andy Shevchenko
2025-03-17 10:55     ` Jonathan Cameron
2025-03-17 15:51       ` Andy Shevchenko
2025-03-18  9:44         ` Lothar Rubusch
2025-03-26  9:32           ` Andy Shevchenko
2025-03-28 15:30             ` Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 05/14] iio: accel: adxl345: add single tap feature Lothar Rubusch
2025-03-16 11:22   ` Jonathan Cameron
2025-03-18 10:32     ` Lothar Rubusch
2025-03-18 23:08     ` Lothar Rubusch
2025-03-31 12:36       ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 06/14] iio: accel: adxl345: add double " Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 07/14] iio: accel: adxl345: set the tap suppress bit permanently Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 08/14] iio: accel: adxl345: add freefall feature Lothar Rubusch
2025-03-13 16:50 ` Lothar Rubusch [this message]
2025-03-16 11:26   ` [PATCH v4 09/14] iio: accel: adxl345: extend sample frequency adjustments Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 10/14] iio: accel: adxl345: add g-range configuration Lothar Rubusch
2025-03-16 11:28   ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 11/14] iio: accel: adxl345: add activity event feature Lothar Rubusch
2025-03-16 11:32   ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 12/14] iio: accel: adxl345: add inactivity feature Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 13/14] iio: accel: adxl345: add coupling detection for activity/inactivity Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 14/14] docs: iio: add documentation for adxl345 driver Lothar Rubusch
2025-03-16 11:37   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250313165049.48305-10-l.rubusch@gmail.com \
    --to=l.rubusch@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=eraretuya@gmail.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.