From: Lothar Rubusch <l.rubusch@gmail.com>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
eraretuya@gmail.com, l.rubusch@gmail.com
Subject: [PATCH v4 11/14] iio: accel: adxl345: add activity event feature
Date: Thu, 13 Mar 2025 16:50:46 +0000 [thread overview]
Message-ID: <20250313165049.48305-12-l.rubusch@gmail.com> (raw)
In-Reply-To: <20250313165049.48305-1-l.rubusch@gmail.com>
Make the sensor detect and issue interrupts at activity. Activity
events are configured by a threshold stored in regmap cache. Initialize
the activity threshold register to a reasonable default value in probe.
The value is taken from the older ADXL345 input driver, to provide a
similar behavior. Reset the activity/inactivity direction enabling
register in probe. Reset and initialization shall bring the sensor in a
defined initial state to prevent dangling settings when warm restarting
the sensor.
Activity, ODR configuration together with the range setting prepare the
activity/inactivity hystersesis setup, implemented in a follow up patch.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
drivers/iio/accel/adxl345_core.c | 222 ++++++++++++++++++++++++++++++-
1 file changed, 219 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index de9202126f70..98a781987b63 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -35,6 +35,7 @@
#define ADXL345_REG_TAP_AXIS_MSK GENMASK(2, 0)
#define ADXL345_REG_TAP_SUPPRESS_MSK BIT(3)
+#define ADXL345_REG_ACT_AXIS_MSK GENMASK(6, 4)
enum adxl345_axis {
ADXL345_Z_EN = BIT(0),
@@ -67,6 +68,23 @@ static const unsigned int adxl345_tap_time_reg[] = {
[ADXL345_TAP_TIME_DUR] = ADXL345_REG_DUR,
};
+/* activity/inactivity */
+enum adxl345_activity_type {
+ ADXL345_ACTIVITY,
+};
+
+static const unsigned int adxl345_act_int_reg[] = {
+ [ADXL345_ACTIVITY] = ADXL345_INT_ACTIVITY,
+};
+
+static const unsigned int adxl345_act_thresh_reg[] = {
+ [ADXL345_ACTIVITY] = ADXL345_REG_THRESH_ACT,
+};
+
+static const unsigned int adxl345_act_axis_msk[] = {
+ [ADXL345_ACTIVITY] = ADXL345_REG_ACT_AXIS_MSK,
+};
+
enum adxl345_odr {
ADXL345_ODR_0P10HZ = 0,
ADXL345_ODR_0P20HZ,
@@ -157,6 +175,13 @@ struct adxl345_state {
};
static struct iio_event_spec adxl345_events[] = {
+ {
+ /* activity */
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
+ },
{
/* single tap */
.type = IIO_EV_TYPE_GESTURE,
@@ -259,6 +284,108 @@ static int adxl345_set_measure_en(struct adxl345_state *st, bool en)
return regmap_write(st->regmap, ADXL345_REG_POWER_CTL, val);
}
+/* act/inact */
+
+static int adxl345_is_act_inact_en(struct adxl345_state *st,
+ enum iio_modifier axis,
+ enum adxl345_activity_type type, bool *en)
+{
+ unsigned int regval;
+ bool axis_en;
+ u32 axis_ctrl;
+ int act_shift;
+ int ret;
+
+ act_shift = (type == ADXL345_ACTIVITY) ? 4 : 0;
+
+ ret = regmap_read(st->regmap, ADXL345_REG_ACT_INACT_CTRL, &axis_ctrl);
+ if (ret)
+ return ret;
+
+ axis_ctrl = axis_ctrl >> act_shift;
+
+ switch (axis) {
+ case IIO_MOD_X:
+ axis_en = FIELD_GET(ADXL345_X_EN, axis_ctrl);
+ break;
+ case IIO_MOD_Y:
+ axis_en = FIELD_GET(ADXL345_Y_EN, axis_ctrl);
+ break;
+ case IIO_MOD_Z:
+ axis_en = FIELD_GET(ADXL345_Z_EN, axis_ctrl);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(st->regmap, ADXL345_REG_INT_ENABLE, ®val);
+ if (ret)
+ return ret;
+
+ *en = (adxl345_act_int_reg[type] & regval) > 0;
+
+ return 0;
+}
+
+static int adxl345_set_act_inact_en(struct adxl345_state *st,
+ enum iio_modifier axis,
+ enum adxl345_activity_type type,
+ bool cmd_en)
+{
+ bool axis_en, en;
+ unsigned int threshold;
+ u32 axis_ctrl;
+ /*
+ * Activity and inactivity share the same register for enabling
+ * directions. Activity uses the four upper bits, where inactivity
+ * detection uses the lower bits. In order to keep generic x, y
+ * and z-axis type, it is shifted for initialization of activity.
+ * NB: Activity and inactivitty axis enable bits are regmap cached.
+ */
+ int act_shift = (type == ADXL345_ACTIVITY) ? 4 : 0;
+ int ret;
+
+ switch (axis) {
+ case IIO_MOD_X:
+ axis_ctrl = ADXL345_X_EN;
+ break;
+ case IIO_MOD_Y:
+ axis_ctrl = ADXL345_Y_EN;
+ break;
+ case IIO_MOD_Z:
+ axis_ctrl = ADXL345_Z_EN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ axis_ctrl = axis_ctrl << act_shift;
+
+ if (cmd_en)
+ ret = regmap_set_bits(st->regmap,
+ ADXL345_REG_ACT_INACT_CTRL, axis_ctrl);
+ else
+ ret = regmap_clear_bits(st->regmap,
+ ADXL345_REG_ACT_INACT_CTRL, axis_ctrl);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(st->regmap, adxl345_act_thresh_reg[type], &threshold);
+ if (ret)
+ return ret;
+
+ en = false;
+
+ if (type == ADXL345_ACTIVITY) {
+ axis_en = FIELD_GET(ADXL345_REG_ACT_AXIS_MSK, axis_ctrl) > 0;
+ en = axis_en && threshold > 0;
+ }
+
+ return regmap_update_bits(st->regmap, ADXL345_REG_INT_ENABLE,
+ adxl345_act_int_reg[type],
+ en ? adxl345_act_int_reg[type] : 0);
+}
+
/* tap */
static int _adxl345_set_tap_int(struct adxl345_state *st,
@@ -719,6 +846,18 @@ static int adxl345_read_event_config(struct iio_dev *indio_dev,
int ret = -EFAULT;
switch (type) {
+ case IIO_EV_TYPE_THRESH:
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ ret = adxl345_is_act_inact_en(st, chan->channel2,
+ ADXL345_ACTIVITY,
+ &int_en);
+ if (ret)
+ return ret;
+ return int_en;
+ default:
+ return -EINVAL;
+ }
case IIO_EV_TYPE_GESTURE:
switch (dir) {
case IIO_EV_DIR_SINGLETAP:
@@ -755,6 +894,14 @@ static int adxl345_write_event_config(struct iio_dev *indio_dev,
struct adxl345_state *st = iio_priv(indio_dev);
switch (type) {
+ case IIO_EV_TYPE_THRESH:
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ return adxl345_set_act_inact_en(st, chan->channel2,
+ ADXL345_ACTIVITY, state);
+ default:
+ return -EINVAL;
+ }
case IIO_EV_TYPE_GESTURE:
switch (dir) {
case IIO_EV_DIR_SINGLETAP:
@@ -779,11 +926,31 @@ static int adxl345_read_event_value(struct iio_dev *indio_dev,
int *val, int *val2)
{
struct adxl345_state *st = iio_priv(indio_dev);
+ unsigned int act_threshold;
unsigned int tap_threshold;
unsigned int ff_threshold;
int ret;
switch (type) {
+ case IIO_EV_TYPE_THRESH:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ ret = regmap_read(st->regmap,
+ adxl345_act_thresh_reg[ADXL345_ACTIVITY],
+ &act_threshold);
+ if (ret)
+ return ret;
+
+ *val = act_threshold;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
case IIO_EV_TYPE_GESTURE:
switch (info) {
case IIO_EV_INFO_VALUE:
@@ -850,6 +1017,23 @@ static int adxl345_write_event_value(struct iio_dev *indio_dev,
return ret;
switch (type) {
+ case IIO_EV_TYPE_THRESH:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ ret = regmap_write(st->regmap,
+ adxl345_act_thresh_reg[ADXL345_ACTIVITY],
+ val);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ break;
case IIO_EV_TYPE_GESTURE:
switch (info) {
case IIO_EV_INFO_VALUE:
@@ -1105,7 +1289,8 @@ static int adxl345_fifo_push(struct iio_dev *indio_dev,
}
static int adxl345_push_event(struct iio_dev *indio_dev, int int_stat,
- enum iio_modifier tap_dir)
+ enum iio_modifier tap_dir,
+ enum iio_modifier act_dir)
{
s64 ts = iio_get_time_ns(indio_dev);
struct adxl345_state *st = iio_priv(indio_dev);
@@ -1132,6 +1317,16 @@ static int adxl345_push_event(struct iio_dev *indio_dev, int int_stat,
return ret;
}
+ if (FIELD_GET(ADXL345_INT_ACTIVITY, int_stat)) {
+ ret = iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, act_dir,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING),
+ ts);
+ if (ret)
+ return ret;
+ }
+
if (FIELD_GET(ADXL345_INT_FREE_FALL, int_stat)) {
ret = iio_push_event(indio_dev,
IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
@@ -1164,10 +1359,12 @@ static int adxl345_push_event(struct iio_dev *indio_dev, int int_stat,
*/
static irqreturn_t adxl345_irq_handler(int irq, void *p)
{
+ const int act_shift = 4;
struct iio_dev *indio_dev = p;
struct adxl345_state *st = iio_priv(indio_dev);
unsigned int regval;
enum iio_modifier tap_dir = IIO_NO_MOD;
+ enum iio_modifier act_dir = IIO_NO_MOD;
u32 axis_ctrl;
int int_stat;
int ret;
@@ -1176,7 +1373,8 @@ static irqreturn_t adxl345_irq_handler(int irq, void *p)
if (ret)
return IRQ_NONE;
- if (FIELD_GET(ADXL345_REG_TAP_AXIS_MSK, axis_ctrl)) {
+ if (FIELD_GET(ADXL345_REG_TAP_AXIS_MSK, axis_ctrl) ||
+ FIELD_GET(ADXL345_REG_ACT_AXIS_MSK, axis_ctrl)) {
ret = regmap_read(st->regmap, ADXL345_REG_ACT_TAP_STATUS, ®val);
if (ret)
return IRQ_NONE;
@@ -1187,12 +1385,22 @@ static irqreturn_t adxl345_irq_handler(int irq, void *p)
tap_dir = IIO_MOD_Y;
else if (FIELD_GET(ADXL345_X_EN, regval))
tap_dir = IIO_MOD_X;
+
+ /* Activity direction is stored in the upper four bits */
+ regval >>= act_shift;
+
+ if (FIELD_GET(ADXL345_Z_EN, regval))
+ act_dir = IIO_MOD_Z;
+ else if (FIELD_GET(ADXL345_Y_EN, regval))
+ act_dir = IIO_MOD_Y;
+ else if (FIELD_GET(ADXL345_X_EN, regval))
+ act_dir = IIO_MOD_X;
}
if (regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, &int_stat))
return IRQ_NONE;
- if (adxl345_push_event(indio_dev, int_stat, tap_dir))
+ if (adxl345_push_event(indio_dev, int_stat, tap_dir, act_dir))
goto err;
if (FIELD_GET(ADXL345_INT_OVERRUN, int_stat))
@@ -1357,6 +1565,14 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
if (ret)
return ret;
+ ret = regmap_write(st->regmap, ADXL345_REG_ACT_INACT_CTRL, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(st->regmap, ADXL345_REG_THRESH_ACT, 6);
+ if (ret)
+ return ret;
+
ret = regmap_write(st->regmap, ADXL345_REG_THRESH_TAP, tap_threshold);
if (ret)
return ret;
--
2.39.5
next prev parent reply other threads:[~2025-03-13 16:51 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-13 16:50 [PATCH v4 00/14] iio: accel: adxl345: add interrupt based sensor events Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 01/14] iio: accel: adxl345: use regmap cache for INT mapping Lothar Rubusch
2025-03-16 11:06 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 02/14] iio: accel: adxl345: move INT enable to regmap cache Lothar Rubusch
2025-03-16 11:11 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 03/14] iio: accel: adxl345: cleanup regmap return values Lothar Rubusch
2025-03-16 11:12 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 04/14] iio: accel: adxl345: introduce adxl345_push_event function Lothar Rubusch
2025-03-16 11:14 ` Jonathan Cameron
2025-03-16 19:58 ` Andy Shevchenko
2025-03-17 10:55 ` Jonathan Cameron
2025-03-17 15:51 ` Andy Shevchenko
2025-03-18 9:44 ` Lothar Rubusch
2025-03-26 9:32 ` Andy Shevchenko
2025-03-28 15:30 ` Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 05/14] iio: accel: adxl345: add single tap feature Lothar Rubusch
2025-03-16 11:22 ` Jonathan Cameron
2025-03-18 10:32 ` Lothar Rubusch
2025-03-18 23:08 ` Lothar Rubusch
2025-03-31 12:36 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 06/14] iio: accel: adxl345: add double " Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 07/14] iio: accel: adxl345: set the tap suppress bit permanently Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 08/14] iio: accel: adxl345: add freefall feature Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 09/14] iio: accel: adxl345: extend sample frequency adjustments Lothar Rubusch
2025-03-16 11:26 ` Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 10/14] iio: accel: adxl345: add g-range configuration Lothar Rubusch
2025-03-16 11:28 ` Jonathan Cameron
2025-03-13 16:50 ` Lothar Rubusch [this message]
2025-03-16 11:32 ` [PATCH v4 11/14] iio: accel: adxl345: add activity event feature Jonathan Cameron
2025-03-13 16:50 ` [PATCH v4 12/14] iio: accel: adxl345: add inactivity feature Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 13/14] iio: accel: adxl345: add coupling detection for activity/inactivity Lothar Rubusch
2025-03-13 16:50 ` [PATCH v4 14/14] docs: iio: add documentation for adxl345 driver Lothar Rubusch
2025-03-16 11:37 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250313165049.48305-12-l.rubusch@gmail.com \
--to=l.rubusch@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=eraretuya@gmail.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.