All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: broonie@kernel.org,catalin.marinas@arm.com,gregkh@linuxfoundation.org,joey.gouly@arm.com,kvmarm@lists.linux.dev,linux-arm-kernel@lists.infradead.org,mark.rutland@arm.com,maz@kernel.org,oliver.upton@linux.dev,suzuki.poulose@arm.com,tabba@google.com,will@kernel.org
Cc: <stable-commits@vger.kernel.org>
Subject: Patch "KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN" has been added to the 6.13-stable tree
Date: Thu, 13 Mar 2025 17:09:29 +0100	[thread overview]
Message-ID: <2025031329-glitter-stricken-345b@gregkh> (raw)
In-Reply-To: <20250312-stable-sve-6-13-v1-5-c7ba07a6f4f7@kernel.org>


This is a note to let you know that I've just added the patch titled

    KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN

to the 6.13-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     kvm-arm64-remove-vhe-host-restore-of-cpacr_el1.smen.patch
and it can be found in the queue-6.13 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


From broonie@kernel.org Thu Mar 13 00:49:44 2025
From: Mark Brown <broonie@kernel.org>
Date: Wed, 12 Mar 2025 23:49:13 +0000
Subject: KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,  Marc Zyngier <maz@kernel.org>, Oliver Upton <oliver.upton@linux.dev>,  Joey Gouly <joey.gouly@arm.com>, Suzuki K Poulose <suzuki.poulose@arm.com>,  Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev,  linux-kernel@vger.kernel.org, stable@vger.kernel.org,  Mark Brown <broonie@kernel.org>, Mark Rutland <mark.rutland@arm.com>,  Fuad Tabba <tabba@google.com>
Message-ID: <20250312-stable-sve-6-13-v1-5-c7ba07a6f4f7@kernel.org>

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 407a99c4654e8ea65393f412c421a55cac539f5b ]

When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic
has historically been broken, and is currently redundant.

This logic was originally introduced in commit:

  861262ab86270206 ("KVM: arm64: Handle SME host state when running guests")

At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when
returning to the host, trapping host access to SME state. Unfortunately,
this was unsafe as the host could take a softirq before calling
kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode
NEON the resulting attempt to save the live FPSIMD/SVE/SME state would
result in a fatal trap.

That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always
saved/restored the host kernel's CPACR_EL1 value, and configured
CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be
trapped.

The issue above was incidentally fixed by commit:

  375110ab51dec5dc ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE")

That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01
when returning to the host, permitting host kernel usage of SME,
avoiding the issue described above. At the time, this was not identified
as a fix for commit 861262ab86270206.

Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SME trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.

Remove the redundant logic.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Update for rework of flags storage -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/kvm_host.h |    2 --
 arch/arm64/kvm/fpsimd.c           |   21 ---------------------
 2 files changed, 23 deletions(-)

--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -902,8 +902,6 @@ struct kvm_vcpu_arch {
 /* Save TRBE context if active  */
 #define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
 
-/* SME enabled for EL0 */
-#define HOST_SME_ENABLED	__vcpu_single_flag(sflags, BIT(1))
 /* Physical CPU not in supported_cpus */
 #define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(2))
 /* WFIT instruction trapped */
--- a/arch/arm64/kvm/fpsimd.c
+++ b/arch/arm64/kvm/fpsimd.c
@@ -65,12 +65,6 @@ void kvm_arch_vcpu_load_fp(struct kvm_vc
 	fpsimd_save_and_flush_cpu_state();
 	*host_data_ptr(fp_owner) = FP_STATE_FREE;
 
-	if (system_supports_sme()) {
-		vcpu_clear_flag(vcpu, HOST_SME_ENABLED);
-		if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
-			vcpu_set_flag(vcpu, HOST_SME_ENABLED);
-	}
-
 	/*
 	 * If normal guests gain SME support, maintain this behavior for pKVM
 	 * guests, which don't support SME.
@@ -141,21 +135,6 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcp
 
 	local_irq_save(flags);
 
-	/*
-	 * If we have VHE then the Hyp code will reset CPACR_EL1 to
-	 * the default value and we need to reenable SME.
-	 */
-	if (has_vhe() && system_supports_sme()) {
-		/* Also restore EL0 state seen on entry */
-		if (vcpu_get_flag(vcpu, HOST_SME_ENABLED))
-			sysreg_clear_set(CPACR_EL1, 0, CPACR_ELx_SMEN);
-		else
-			sysreg_clear_set(CPACR_EL1,
-					 CPACR_EL1_SMEN_EL0EN,
-					 CPACR_EL1_SMEN_EL1EN);
-		isb();
-	}
-
 	if (guest_owns_fp_regs()) {
 		if (vcpu_has_sve(vcpu)) {
 			u64 zcr = read_sysreg_el1(SYS_ZCR);


Patches currently in stable-queue which might be from broonie@kernel.org are

queue-6.13/kvm-arm64-remove-host-fpsimd-saving-for-non-protected-kvm.patch
queue-6.13/kvm-arm64-mark-some-header-functions-as-inline.patch
queue-6.13/kvm-arm64-eagerly-switch-zcr_el-1-2.patch
queue-6.13/kvm-arm64-unconditionally-save-flush-host-fpsimd-sve-sme-state.patch
queue-6.13/kvm-arm64-refactor-exit-handlers.patch
queue-6.13/kvm-arm64-remove-vhe-host-restore-of-cpacr_el1.zen.patch
queue-6.13/kvm-arm64-remove-vhe-host-restore-of-cpacr_el1.smen.patch
queue-6.13/kvm-arm64-calculate-cptr_el2-traps-on-activating-traps.patch

  parent reply	other threads:[~2025-03-13 16:09 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-12 23:49 [PATCH 6.13 0/8] KVM: arm64: Backport of SVE fixes to v6.13 Mark Brown
2025-03-12 23:49 ` [PATCH 6.13 1/8] KVM: arm64: Calculate cptr_el2 traps on activating traps Mark Brown
2025-03-13 12:31   ` Sasha Levin
2025-03-13 16:09   ` Patch "KVM: arm64: Calculate cptr_el2 traps on activating traps" has been added to the 6.13-stable tree gregkh
2025-03-12 23:49 ` [PATCH 6.13 2/8] KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state Mark Brown
2025-03-13 12:31   ` Sasha Levin
2025-03-13 16:09   ` Patch "KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state" has been added to the 6.13-stable tree gregkh
2025-03-12 23:49 ` [PATCH 6.13 3/8] KVM: arm64: Remove host FPSIMD saving for non-protected KVM Mark Brown
2025-03-13 12:31   ` Sasha Levin
2025-03-13 16:09   ` Patch "KVM: arm64: Remove host FPSIMD saving for non-protected KVM" has been added to the 6.13-stable tree gregkh
2025-03-12 23:49 ` [PATCH 6.13 4/8] KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN Mark Brown
2025-03-13 12:31   ` Sasha Levin
2025-03-13 16:09   ` Patch "KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN" has been added to the 6.13-stable tree gregkh
2025-03-12 23:49 ` [PATCH 6.13 5/8] KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN Mark Brown
2025-03-13 12:31   ` Sasha Levin
2025-03-13 16:09   ` gregkh [this message]
2025-03-12 23:49 ` [PATCH 6.13 6/8] KVM: arm64: Refactor exit handlers Mark Brown
2025-03-13 12:31   ` Sasha Levin
2025-03-13 16:09   ` Patch "KVM: arm64: Refactor exit handlers" has been added to the 6.13-stable tree gregkh
2025-03-12 23:49 ` [PATCH 6.13 7/8] KVM: arm64: Mark some header functions as inline Mark Brown
2025-03-13 12:31   ` Sasha Levin
2025-03-13 16:09   ` Patch "KVM: arm64: Mark some header functions as inline" has been added to the 6.13-stable tree gregkh
2025-03-12 23:49 ` [PATCH 6.13 8/8] KVM: arm64: Eagerly switch ZCR_EL{1,2} Mark Brown
2025-03-13 12:31   ` Sasha Levin
2025-03-13 16:09   ` Patch "KVM: arm64: Eagerly switch ZCR_EL{1,2}" has been added to the 6.13-stable tree gregkh
2025-03-19 10:29   ` [PATCH 6.13 8/8] KVM: arm64: Eagerly switch ZCR_EL{1,2} Mark Rutland
  -- strict thread matches above, loose matches on Subject: below --
2025-03-21  0:10 [PATCH 6.13 v2 5/8] KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN Mark Brown
2025-03-24 18:56 ` Patch "KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN" has been added to the 6.13-stable tree gregkh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2025031329-glitter-stricken-345b@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=joey.gouly@arm.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=stable-commits@vger.kernel.org \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.