[PATCH blktests 2/3] nvme/060: add test nvme fabrics target resetting during I/O

[Daniel Wagner <wagi@kernel.org>]

Newer kernel support to reset the target via the debugfs. Add a new test
case which exercises this interface.

Signed-off-by: Daniel Wagner <wagi@kernel.org>
---
 tests/nvme/060     | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/nvme/060.out |  2 ++
 2 files changed, 90 insertions(+)

diff --git a/tests/nvme/060 b/tests/nvme/060
new file mode 100755
index 0000000000000000000000000000000000000000..16a3c0d20274428ae175693109c694f42004a619
--- /dev/null
+++ b/tests/nvme/060
@@ -0,0 +1,88 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-3.0+
+# Copyright (C) 2025 Daniel Wagner, SUSE Labs
+#
+# Test nvme fabrics controller reset/disconnect/reconnect operation during I/O
+# This test is somewhat similar to test 032 but for fabrics controllers.
+
+. tests/nvme/rc
+
+DESCRIPTION="test nvme fabrics target resetting during I/O"
+
+requires() {
+	_nvme_requires
+	_have_loop
+	_have_fio
+	_require_nvme_trtype_is_fabrics
+}
+
+set_conditions() {
+	_set_nvme_trtype "$@"
+}
+
+nvmet_debug_trigger_reset() {
+	local nvmet_subsystem="$1"
+	local dfs_path="${NVMET_DFS}/${nvmet_subsystem}"
+
+	find "${dfs_path}" -maxdepth 1 -type d -name 'ctrl*' -exec sh -c 'echo "fatal" > "$1/state"' _ {} \;
+}
+
+nvmf_wait_for_state() {
+	local def_state_timeout=5
+	local subsys_name="$1"
+	local state="$2"
+	local timeout="${3:-$def_state_timeout}"
+	local nvmedev
+	local state_file
+	local start_time
+	local end_time
+
+	nvmedev=$(_find_nvme_dev "${subsys_name}")
+	state_file="/sys/class/nvme-fabrics/ctl/${nvmedev}/state"
+
+	start_time=$(date +%s)
+	while ! grep -q "${state}" "${state_file}"; do
+		sleep 1
+		end_time=$(date +%s)
+		if (( end_time - start_time > timeout )); then
+			echo "expected state \"${state}\" not " \
+				"reached within ${timeout} seconds"
+			return 1
+		fi
+	done
+
+	return 0
+}
+
+nvmet_reset_loop() {
+	while true; do
+		nvmet_debug_trigger_reset "${def_subsysnqn}"
+		sleep 2
+	done
+}
+
+test() {
+	echo "Running ${TEST_NAME}"
+
+	_setup_nvmet
+
+	_nvmet_target_setup
+
+	nvmet_reset_loop &
+	fio_pid=$!
+
+	# Try to trigger resets when the host is in different states connected,
+	# or connecting by calling target reset with an even number and the
+	# reconnect attempt with an uneven timeout.
+	for ((i = 0; i <= 5; i++)); do
+		_nvme_connect_subsys --keep-alive-tmo 1 --reconnect-delay 1
+		sleep 3
+		_nvme_disconnect_subsys >> "$FULL" 2>&1
+	done
+
+	{ kill "${fio_pid}"; wait; } &> /dev/null
+
+	_nvmet_target_cleanup
+
+	echo "Test complete"
+}
diff --git a/tests/nvme/060.out b/tests/nvme/060.out
new file mode 100644
index 0000000000000000000000000000000000000000..517ff2dfcfd41c4088991e669af9fef52bde570b
--- /dev/null
+++ b/tests/nvme/060.out
@@ -0,0 +1,2 @@
+Running nvme/060
+Test complete

-- 
2.48.1