From: Xianwei Zhao <xianwei.zhao@amlogic.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Xianwei Zhao <xianwei.zhao@amlogic.com>
Subject: [PATCH] arm64: dts: amlogic: a4: fix dtb compilation warning issues
Date: Fri, 21 Mar 2025 10:23:55 +0800 [thread overview]
Message-ID: <20250321-fix-a4-pinctrl-node-v1-1-5719f9f09932@amlogic.com> (raw)
When use command 'make ARCH=arm64 dtbs_check W=1' to compile dtb,
a warning message appears.
"Warning (simple_bus_reg): /soc/bus@fe000000/pinctrl:
missing or empty reg/ranges property"
Add the unit address to the pinctrl node to fix it.
Fixes: ce78f679e08c ("arm64: dts: amlogic: a4: add pinctrl node")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 102 +++++++++++++++-------------
1 file changed, 55 insertions(+), 47 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index fa80fa365f13..582e0043024b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -51,87 +51,52 @@ pwrc: power-controller {
};
&apb {
- gpio_intc: interrupt-controller@4080 {
- compatible = "amlogic,a4-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x4080 0x0 0x20>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts =
- <10 11 12 13 14 15 16 17 18 19 20 21>;
- };
-
- gpio_ao_intc: interrupt-controller@8e72c {
- compatible = "amlogic,a4-gpio-ao-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x8e72c 0x0 0x0c>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <140 141>;
- };
-
- periphs_pinctrl: pinctrl {
+ periphs_pinctrl: pinctrl@4000 {
compatible = "amlogic,pinctrl-a4";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
- gpiox: gpio@4100 {
- reg = <0 0x4100 0 0x40>, <0 0x400c 0 0xc>;
+ gpiox: gpio@100 {
+ reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
};
- gpiot: gpio@4140 {
- reg = <0 0x4140 0 0x40>, <0 0x402c 0 0xc>;
+ gpiot: gpio@140 {
+ reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
};
- gpiod: gpio@4180 {
- reg = <0 0x4180 0 0x40>, <0 0x4040 0 0x8>;
+ gpiod: gpio@180 {
+ reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
};
- gpioe: gpio@41c0 {
- reg = <0 0x41c0 0 0x40>, <0 0x4048 0 0x4>;
+ gpioe: gpio@1c0 {
+ reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
};
- gpiob: gpio@4240 {
- reg = <0 0x4240 0 0x40>, <0 0x4000 0 0x8>;
+ gpiob: gpio@240 {
+ reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
};
- gpioao: gpio@8e704 {
- reg = <0 0x8e704 0 0x16>, <0 0x8e700 0 0x4>;
- reg-names = "gpio", "mux";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
- };
-
- test_n: gpio@8e744 {
- reg = <0 0x8e744 0 0x20>;
- reg-names = "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
- };
-
func-uart-a {
uart_a_default: group-uart-a-pins1 {
pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
@@ -186,4 +151,47 @@ uart_e_default: group-uart-e-pins {
};
};
};
+
+ gpio_intc: interrupt-controller@4080 {
+ compatible = "amlogic,a4-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x4080 0x0 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <10 11 12 13 14 15 16 17 18 19 20 21>;
+ };
+
+ ao_pinctrl: pinctrl@8e700 {
+ compatible = "amlogic,pinctrl-a4";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
+
+ gpioao: gpio@4 {
+ reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
+ };
+
+ test_n: gpio@44 {
+ reg = <0 0x44 0 0x20>;
+ reg-names = "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+ };
+ };
+
+ gpio_ao_intc: interrupt-controller@8e72c {
+ compatible = "amlogic,a4-gpio-ao-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x8e72c 0x0 0x0c>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <140 141>;
+ };
+
};
---
base-commit: 73a143e436311183186ab4b365a84c662f2c9651
change-id: 20250317-fix-a4-pinctrl-node-9babfd44e085
Best regards,
--
Xianwei Zhao <xianwei.zhao@amlogic.com>
WARNING: multiple messages have this Message-ID (diff)
From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@kernel.org>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Xianwei Zhao <xianwei.zhao@amlogic.com>
Subject: [PATCH] arm64: dts: amlogic: a4: fix dtb compilation warning issues
Date: Fri, 21 Mar 2025 10:23:55 +0800 [thread overview]
Message-ID: <20250321-fix-a4-pinctrl-node-v1-1-5719f9f09932@amlogic.com> (raw)
From: Xianwei Zhao <xianwei.zhao@amlogic.com>
When use command 'make ARCH=arm64 dtbs_check W=1' to compile dtb,
a warning message appears.
"Warning (simple_bus_reg): /soc/bus@fe000000/pinctrl:
missing or empty reg/ranges property"
Add the unit address to the pinctrl node to fix it.
Fixes: ce78f679e08c ("arm64: dts: amlogic: a4: add pinctrl node")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 102 +++++++++++++++-------------
1 file changed, 55 insertions(+), 47 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index fa80fa365f13..582e0043024b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -51,87 +51,52 @@ pwrc: power-controller {
};
&apb {
- gpio_intc: interrupt-controller@4080 {
- compatible = "amlogic,a4-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x4080 0x0 0x20>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts =
- <10 11 12 13 14 15 16 17 18 19 20 21>;
- };
-
- gpio_ao_intc: interrupt-controller@8e72c {
- compatible = "amlogic,a4-gpio-ao-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x8e72c 0x0 0x0c>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <140 141>;
- };
-
- periphs_pinctrl: pinctrl {
+ periphs_pinctrl: pinctrl@4000 {
compatible = "amlogic,pinctrl-a4";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
- gpiox: gpio@4100 {
- reg = <0 0x4100 0 0x40>, <0 0x400c 0 0xc>;
+ gpiox: gpio@100 {
+ reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
};
- gpiot: gpio@4140 {
- reg = <0 0x4140 0 0x40>, <0 0x402c 0 0xc>;
+ gpiot: gpio@140 {
+ reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
};
- gpiod: gpio@4180 {
- reg = <0 0x4180 0 0x40>, <0 0x4040 0 0x8>;
+ gpiod: gpio@180 {
+ reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
};
- gpioe: gpio@41c0 {
- reg = <0 0x41c0 0 0x40>, <0 0x4048 0 0x4>;
+ gpioe: gpio@1c0 {
+ reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
};
- gpiob: gpio@4240 {
- reg = <0 0x4240 0 0x40>, <0 0x4000 0 0x8>;
+ gpiob: gpio@240 {
+ reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
};
- gpioao: gpio@8e704 {
- reg = <0 0x8e704 0 0x16>, <0 0x8e700 0 0x4>;
- reg-names = "gpio", "mux";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
- };
-
- test_n: gpio@8e744 {
- reg = <0 0x8e744 0 0x20>;
- reg-names = "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
- };
-
func-uart-a {
uart_a_default: group-uart-a-pins1 {
pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
@@ -186,4 +151,47 @@ uart_e_default: group-uart-e-pins {
};
};
};
+
+ gpio_intc: interrupt-controller@4080 {
+ compatible = "amlogic,a4-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x4080 0x0 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <10 11 12 13 14 15 16 17 18 19 20 21>;
+ };
+
+ ao_pinctrl: pinctrl@8e700 {
+ compatible = "amlogic,pinctrl-a4";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
+
+ gpioao: gpio@4 {
+ reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
+ };
+
+ test_n: gpio@44 {
+ reg = <0 0x44 0 0x20>;
+ reg-names = "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+ };
+ };
+
+ gpio_ao_intc: interrupt-controller@8e72c {
+ compatible = "amlogic,a4-gpio-ao-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x8e72c 0x0 0x0c>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <140 141>;
+ };
+
};
---
base-commit: 73a143e436311183186ab4b365a84c662f2c9651
change-id: 20250317-fix-a4-pinctrl-node-9babfd44e085
Best regards,
--
Xianwei Zhao <xianwei.zhao@amlogic.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@kernel.org>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Xianwei Zhao <xianwei.zhao@amlogic.com>
Subject: [PATCH] arm64: dts: amlogic: a4: fix dtb compilation warning issues
Date: Fri, 21 Mar 2025 10:23:55 +0800 [thread overview]
Message-ID: <20250321-fix-a4-pinctrl-node-v1-1-5719f9f09932@amlogic.com> (raw)
From: Xianwei Zhao <xianwei.zhao@amlogic.com>
When use command 'make ARCH=arm64 dtbs_check W=1' to compile dtb,
a warning message appears.
"Warning (simple_bus_reg): /soc/bus@fe000000/pinctrl:
missing or empty reg/ranges property"
Add the unit address to the pinctrl node to fix it.
Fixes: ce78f679e08c ("arm64: dts: amlogic: a4: add pinctrl node")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 102 +++++++++++++++-------------
1 file changed, 55 insertions(+), 47 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index fa80fa365f13..582e0043024b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -51,87 +51,52 @@ pwrc: power-controller {
};
&apb {
- gpio_intc: interrupt-controller@4080 {
- compatible = "amlogic,a4-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x4080 0x0 0x20>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts =
- <10 11 12 13 14 15 16 17 18 19 20 21>;
- };
-
- gpio_ao_intc: interrupt-controller@8e72c {
- compatible = "amlogic,a4-gpio-ao-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x8e72c 0x0 0x0c>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <140 141>;
- };
-
- periphs_pinctrl: pinctrl {
+ periphs_pinctrl: pinctrl@4000 {
compatible = "amlogic,pinctrl-a4";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
- gpiox: gpio@4100 {
- reg = <0 0x4100 0 0x40>, <0 0x400c 0 0xc>;
+ gpiox: gpio@100 {
+ reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
};
- gpiot: gpio@4140 {
- reg = <0 0x4140 0 0x40>, <0 0x402c 0 0xc>;
+ gpiot: gpio@140 {
+ reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
};
- gpiod: gpio@4180 {
- reg = <0 0x4180 0 0x40>, <0 0x4040 0 0x8>;
+ gpiod: gpio@180 {
+ reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
};
- gpioe: gpio@41c0 {
- reg = <0 0x41c0 0 0x40>, <0 0x4048 0 0x4>;
+ gpioe: gpio@1c0 {
+ reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
};
- gpiob: gpio@4240 {
- reg = <0 0x4240 0 0x40>, <0 0x4000 0 0x8>;
+ gpiob: gpio@240 {
+ reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
reg-names = "gpio", "mux";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
};
- gpioao: gpio@8e704 {
- reg = <0 0x8e704 0 0x16>, <0 0x8e700 0 0x4>;
- reg-names = "gpio", "mux";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
- };
-
- test_n: gpio@8e744 {
- reg = <0 0x8e744 0 0x20>;
- reg-names = "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
- };
-
func-uart-a {
uart_a_default: group-uart-a-pins1 {
pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
@@ -186,4 +151,47 @@ uart_e_default: group-uart-e-pins {
};
};
};
+
+ gpio_intc: interrupt-controller@4080 {
+ compatible = "amlogic,a4-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x4080 0x0 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <10 11 12 13 14 15 16 17 18 19 20 21>;
+ };
+
+ ao_pinctrl: pinctrl@8e700 {
+ compatible = "amlogic,pinctrl-a4";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
+
+ gpioao: gpio@4 {
+ reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
+ };
+
+ test_n: gpio@44 {
+ reg = <0 0x44 0 0x20>;
+ reg-names = "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+ };
+ };
+
+ gpio_ao_intc: interrupt-controller@8e72c {
+ compatible = "amlogic,a4-gpio-ao-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x8e72c 0x0 0x0c>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <140 141>;
+ };
+
};
---
base-commit: 73a143e436311183186ab4b365a84c662f2c9651
change-id: 20250317-fix-a4-pinctrl-node-9babfd44e085
Best regards,
--
Xianwei Zhao <xianwei.zhao@amlogic.com>
next reply other threads:[~2025-03-21 2:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-21 2:23 Xianwei Zhao [this message]
2025-03-21 2:23 ` [PATCH] arm64: dts: amlogic: a4: fix dtb compilation warning issues Xianwei Zhao via B4 Relay
2025-03-21 2:23 ` Xianwei Zhao via B4 Relay
2025-03-21 9:25 ` Krzysztof Kozlowski
2025-03-21 9:25 ` Krzysztof Kozlowski
2025-03-21 9:58 ` Xianwei Zhao
2025-03-21 9:58 ` Xianwei Zhao
2025-03-21 9:37 ` Neil Armstrong
2025-03-21 9:37 ` Neil Armstrong
2025-03-21 9:49 ` Xianwei Zhao
2025-03-21 9:49 ` Xianwei Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250321-fix-a4-pinctrl-node-v1-1-5719f9f09932@amlogic.com \
--to=xianwei.zhao@amlogic.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.