From: Nicholas Piggin <npiggin@gmail.com>
To: Corey Minyard <minyard@acm.org>
Cc: Nicholas Piggin <npiggin@gmail.com>, qemu-devel@nongnu.org
Subject: [PATCH v2 4/5] ipmi/bmc-sim: implement watchdog dont log flag
Date: Tue, 1 Apr 2025 21:44:11 +1000 [thread overview]
Message-ID: <20250401114412.676636-5-npiggin@gmail.com> (raw)
In-Reply-To: <20250401114412.676636-1-npiggin@gmail.com>
If the dont-log flag is set in the 'timer use' field for the
'set watchdog' command, a watchdog timeout will not get logged as
a timer use expiration.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
hw/ipmi/ipmi_bmc_sim.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/hw/ipmi/ipmi_bmc_sim.c b/hw/ipmi/ipmi_bmc_sim.c
index 216bf8ff7f0..3cefc69f8a8 100644
--- a/hw/ipmi/ipmi_bmc_sim.c
+++ b/hw/ipmi/ipmi_bmc_sim.c
@@ -514,7 +514,8 @@ static void gen_event(IPMIBmcSim *ibs, unsigned int sens_num, uint8_t deassert,
static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
unsigned int bit, unsigned int val,
- uint8_t evd1, uint8_t evd2, uint8_t evd3)
+ uint8_t evd1, uint8_t evd2, uint8_t evd3,
+ bool do_log)
{
IPMISensor *sens;
uint16_t mask;
@@ -534,7 +535,7 @@ static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
return; /* Already asserted */
}
sens->assert_states |= mask & sens->assert_suppt;
- if (sens->assert_enable & mask & sens->assert_states) {
+ if (do_log && (sens->assert_enable & mask & sens->assert_states)) {
/* Send an event on assert */
gen_event(ibs, sensor, 0, evd1, evd2, evd3);
}
@@ -544,7 +545,7 @@ static void sensor_set_discrete_bit(IPMIBmcSim *ibs, unsigned int sensor,
return; /* Already deasserted */
}
sens->deassert_states |= mask & sens->deassert_suppt;
- if (sens->deassert_enable & mask & sens->deassert_states) {
+ if (do_log && (sens->deassert_enable & mask & sens->deassert_states)) {
/* Send an event on deassert */
gen_event(ibs, sensor, 1, evd1, evd2, evd3);
}
@@ -700,6 +701,7 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
{
IPMIInterface *s = ibs->parent.intf;
IPMIInterfaceClass *k = IPMI_INTERFACE_GET_CLASS(s);
+ bool do_log = !IPMI_BMC_WATCHDOG_GET_DONT_LOG(ibs);
if (!ibs->watchdog_running) {
goto out;
@@ -711,14 +713,16 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
ibs->msg_flags |= IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK;
k->do_hw_op(s, IPMI_SEND_NMI, 0);
sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 8, 1,
- 0xc8, (2 << 4) | 0xf, 0xff);
+ 0xc8, (2 << 4) | 0xf, 0xff,
+ do_log);
break;
case IPMI_BMC_WATCHDOG_PRE_MSG_INT:
ibs->msg_flags |= IPMI_BMC_MSG_FLAG_WATCHDOG_TIMEOUT_MASK;
k->set_atn(s, 1, attn_irq_enabled(ibs));
sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 8, 1,
- 0xc8, (3 << 4) | 0xf, 0xff);
+ 0xc8, (3 << 4) | 0xf, 0xff,
+ do_log);
break;
default:
@@ -734,28 +738,36 @@ static void ipmi_sim_handle_timeout(IPMIBmcSim *ibs)
do_full_expiry:
ibs->watchdog_running = 0; /* Stop the watchdog on a timeout */
- ibs->watchdog_expired |= (1 << IPMI_BMC_WATCHDOG_GET_USE(ibs));
+
+ if (do_log) {
+ ibs->watchdog_expired |= (1 << IPMI_BMC_WATCHDOG_GET_USE(ibs));
+ }
+
switch (IPMI_BMC_WATCHDOG_GET_ACTION(ibs)) {
case IPMI_BMC_WATCHDOG_ACTION_NONE:
sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 0, 1,
- 0xc0, ibs->watchdog_use & 0xf, 0xff);
+ 0xc0, ibs->watchdog_use & 0xf, 0xff,
+ do_log);
break;
case IPMI_BMC_WATCHDOG_ACTION_RESET:
sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 1, 1,
- 0xc1, ibs->watchdog_use & 0xf, 0xff);
+ 0xc1, ibs->watchdog_use & 0xf, 0xff,
+ do_log);
k->do_hw_op(s, IPMI_RESET_CHASSIS, 0);
break;
case IPMI_BMC_WATCHDOG_ACTION_POWER_DOWN:
sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 2, 1,
- 0xc2, ibs->watchdog_use & 0xf, 0xff);
+ 0xc2, ibs->watchdog_use & 0xf, 0xff,
+ do_log);
k->do_hw_op(s, IPMI_POWEROFF_CHASSIS, 0);
break;
case IPMI_BMC_WATCHDOG_ACTION_POWER_CYCLE:
sensor_set_discrete_bit(ibs, IPMI_WATCHDOG_SENSOR, 2, 1,
- 0xc3, ibs->watchdog_use & 0xf, 0xff);
+ 0xc3, ibs->watchdog_use & 0xf, 0xff,
+ do_log);
k->do_hw_op(s, IPMI_POWERCYCLE_CHASSIS, 0);
break;
}
--
2.47.1
next prev parent reply other threads:[~2025-04-01 11:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-01 11:44 [PATCH v2 0/5] ipmi: bmc-sim improvements Nicholas Piggin
2025-04-01 11:44 ` [PATCH v2 1/5] ipmi/pci-ipmi-bt: Rename copy-paste variables Nicholas Piggin
2025-04-01 11:49 ` Philippe Mathieu-Daudé
2025-04-01 11:44 ` [PATCH v2 2/5] ipmi: add fwinfo to pci ipmi devices Nicholas Piggin
2025-04-01 11:57 ` Philippe Mathieu-Daudé
2025-04-01 13:27 ` Nicholas Piggin
2025-04-01 14:55 ` Philippe Mathieu-Daudé
2025-04-01 13:09 ` Corey Minyard
2025-04-01 13:29 ` Nicholas Piggin
2025-04-01 11:44 ` [PATCH v2 3/5] ipmi/bmc-sim: Add 'Get Channel Info' command Nicholas Piggin
2025-04-01 11:44 ` Nicholas Piggin [this message]
2025-04-01 13:05 ` [PATCH v2 4/5] ipmi/bmc-sim: implement watchdog dont log flag Corey Minyard
2025-04-01 13:28 ` Nicholas Piggin
2025-04-01 11:44 ` [PATCH v2 5/5] ipmi/bmc-sim: add error handling for 'Set BMC Global Enables' command Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250401114412.676636-5-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=minyard@acm.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.