All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Anderson <sean.anderson@linux.dev>
To: netdev@vger.kernel.org, Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>
Cc: Christian Marangi <ansuelsmth@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	linux-kernel@vger.kernel.org, upstream@airoha.com,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Sean Anderson <sean.anderson@linux.dev>
Subject: [RFC net-next PATCH 10/13] net: macb: Support external PCSs
Date: Thu,  3 Apr 2025 14:27:06 -0400	[thread overview]
Message-ID: <20250403182706.1948535-1-sean.anderson@linux.dev> (raw)
In-Reply-To: <20250403181907.1947517-1-sean.anderson@linux.dev>

This adds support for external PCSs. For example, the Xilinx UltraScale+
processor exposes its GMII interface to the FPGA fabric. This fabric may
implement PCS to convert GMII to a serial interface such as SGMII or
1000BASE-X. When present, the external PCS takes precedence over the
internal PCSs.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 drivers/net/ethernet/cadence/macb.h      |  1 +
 drivers/net/ethernet/cadence/macb_main.c | 30 ++++++++++++++++++++----
 2 files changed, 27 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index c9a5c8beb2fa..9d310814f052 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -1291,6 +1291,7 @@ struct macb {
 	struct phylink_config	phylink_config;
 	struct phylink_pcs	phylink_usx_pcs;
 	struct phylink_pcs	phylink_sgmii_pcs;
+	struct phylink_pcs	*phylink_ext_pcs;
 
 	u32			caps;
 	unsigned int		dma_burst_length;
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 665fc3c4d39a..65cdf3b478fc 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -21,6 +21,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/dma-mapping.h>
+#include <linux/pcs.h>
 #include <linux/platform_device.h>
 #include <linux/phylink.h>
 #include <linux/of.h>
@@ -549,12 +550,12 @@ static void macb_set_tx_clk(struct macb *bp, int speed)
 		netdev_err(bp->dev, "adjusting tx_clk failed.\n");
 }
 
-static void macb_pcs_get_state(struct phylink_pcs *pcs,
+static void macb_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 			       struct phylink_link_state *state)
 {
 	struct macb *bp = container_of(pcs, struct macb, phylink_sgmii_pcs);
 
-	phylink_mii_c22_pcs_decode_state(state, gem_readl(bp, PCSSTS),
+	phylink_mii_c22_pcs_decode_state(state, neg_mode, gem_readl(bp, PCSSTS),
 					 gem_readl(bp, PCSANLPBASE));
 }
 
@@ -707,7 +708,10 @@ static struct phylink_pcs *macb_mac_select_pcs(struct phylink_config *config,
 	struct net_device *ndev = to_net_dev(config->dev);
 	struct macb *bp = netdev_priv(ndev);
 
-	if (interface == PHY_INTERFACE_MODE_10GBASER)
+	if (bp->phylink_ext_pcs &&
+	    test_bit(interface, bp->phylink_ext_pcs->supported_interfaces))
+		return bp->phylink_ext_pcs;
+	else if (interface == PHY_INTERFACE_MODE_10GBASER)
 		return &bp->phylink_usx_pcs;
 	else if (interface == PHY_INTERFACE_MODE_SGMII)
 		return &bp->phylink_sgmii_pcs;
@@ -733,7 +737,10 @@ static void macb_mac_config(struct phylink_config *config, unsigned int mode,
 		if (state->interface == PHY_INTERFACE_MODE_RMII)
 			ctrl |= MACB_BIT(RM9200_RMII);
 	} else if (macb_is_gem(bp)) {
-		if (macb_mac_select_pcs(config, state->interface))
+		struct phylink_pcs *pcs = macb_mac_select_pcs(config,
+							      state->interface);
+
+		if (pcs && pcs != bp->phylink_ext_pcs)
 			ctrl |= GEM_BIT(PCSSEL);
 		else
 			ctrl &= ~GEM_BIT(PCSSEL);
@@ -907,6 +914,14 @@ static int macb_mii_probe(struct net_device *dev)
 	bp->phylink_sgmii_pcs.ops = &macb_phylink_pcs_ops;
 	bp->phylink_usx_pcs.ops = &macb_phylink_usx_pcs_ops;
 
+	bp->phylink_ext_pcs = pcs_get_by_fwnode_optional(&bp->pdev->dev,
+							 bp->pdev->dev.fwnode,
+							 NULL);
+	if (IS_ERR(bp->phylink_ext_pcs))
+		return dev_err_probe(&bp->pdev->dev,
+				     PTR_ERR(bp->phylink_ext_pcs),
+				     "Could not get external PCS\n");
+
 	bp->phylink_config.dev = &dev->dev;
 	bp->phylink_config.type = PHYLINK_NETDEV;
 	bp->phylink_config.mac_managed_pm = true;
@@ -924,6 +939,11 @@ static int macb_mii_probe(struct net_device *dev)
 	__set_bit(PHY_INTERFACE_MODE_RMII,
 		  bp->phylink_config.supported_interfaces);
 
+	if (bp->phylink_ext_pcs)
+		phy_interface_or(bp->phylink_config.supported_interfaces,
+				 bp->phylink_config.supported_interfaces,
+				 bp->phylink_ext_pcs->supported_interfaces);
+
 	/* Determine what modes are supported */
 	if (macb_is_gem(bp) && (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE)) {
 		bp->phylink_config.mac_capabilities |= MAC_1000FD;
@@ -950,6 +970,7 @@ static int macb_mii_probe(struct net_device *dev)
 	if (IS_ERR(bp->phylink)) {
 		netdev_err(dev, "Could not create a phylink instance (%ld)\n",
 			   PTR_ERR(bp->phylink));
+		pcs_put(&bp->pdev->dev, bp->phylink_ext_pcs);
 		return PTR_ERR(bp->phylink);
 	}
 
@@ -5462,6 +5483,7 @@ static void macb_remove(struct platform_device *pdev)
 					  bp->rx_clk, bp->tsu_clk);
 			pm_runtime_set_suspended(&pdev->dev);
 		}
+		pcs_put(&pdev->dev, bp->phylink_ext_pcs);
 		phylink_destroy(bp->phylink);
 		free_netdev(dev);
 	}
-- 
2.35.1.1320.gc452695387.dirty


  parent reply	other threads:[~2025-04-03 18:27 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-03 18:18 [RFC net-next PATCH 00/13] Add PCS core support Sean Anderson
2025-04-03 18:18 ` [RFC net-next PATCH 01/13] dt-bindings: net: Add binding for Xilinx PCS Sean Anderson
2025-04-04 10:37   ` Krzysztof Kozlowski
2025-04-04 10:39     ` Krzysztof Kozlowski
2025-04-04 15:12       ` Sean Anderson
2025-04-04 15:19     ` Sean Anderson
2025-04-03 18:18 ` [RFC net-next PATCH 02/13] net: phylink: Support setting PCS link change callbacks Sean Anderson
2025-04-03 18:18 ` [RFC net-next PATCH 03/13] net: pcs: Add subsystem Sean Anderson
2025-04-04 14:29   ` kernel test robot
2025-04-03 18:18 ` [RFC net-next PATCH 04/13] net: dsa: ocelot: suppress PHY device scanning on the internal MDIO bus Sean Anderson
2025-04-03 18:18 ` [RFC net-next PATCH 05/13] net: pcs: lynx: Convert to an MDIO driver Sean Anderson
2025-04-04 15:21   ` kernel test robot
2025-04-03 18:19 ` [RFC net-next PATCH 06/13] net: phy: Export some functions Sean Anderson
2025-04-03 18:37   ` Florian Fainelli
2025-04-03 19:08     ` Sean Anderson
2025-04-03 18:19 ` [RFC net-next PATCH 07/13] net: pcs: Add Xilinx PCS driver Sean Anderson
2025-04-03 20:27   ` Russell King (Oracle)
2025-04-03 20:51     ` Sean Anderson
2025-04-03 18:19 ` [RFC net-next PATCH 08/13] net: axienet: Convert to use PCS subsystem Sean Anderson
2025-04-04 14:39   ` kernel test robot
2025-04-03 18:19 ` [RFC net-next PATCH 09/13] net: macb: Move most of mac_config to mac_prepare Sean Anderson
2025-04-03 18:27 ` Sean Anderson [this message]
2025-04-03 20:31   ` [RFC net-next PATCH 10/13] net: macb: Support external PCSs Russell King (Oracle)
2025-04-03 18:27 ` [RFC net-next PATCH 11/13] of: property: Add device link support for PCS Sean Anderson
2025-04-03 18:32   ` Saravana Kannan
2025-04-03 19:04     ` Sean Anderson
2025-04-03 18:28 ` [RFC net-next PATCH 12/13] arm64: dts: Add compatible strings for Lynx PCSs Sean Anderson
2025-04-03 18:30 ` [RFC net-next PATCH 13/13] powerpc: " Sean Anderson
2025-04-07 16:27 ` [RFC net-next PATCH 00/13] Add PCS core support Kory Maincent
2025-04-07 16:33   ` Sean Anderson
2025-04-07 16:46     ` Christian Marangi (Ansuel)
2025-04-07 17:00       ` Sean Anderson
2025-04-07 17:21         ` Christian Marangi (Ansuel)
2025-04-07 17:25           ` Daniel Golle
2025-04-07 17:40             ` Sean Anderson
2025-04-08 15:17             ` Sean Anderson
2025-04-07 18:06           ` Sean Anderson
2025-04-07 16:51     ` Kory Maincent

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250403182706.1948535-1-sean.anderson@linux.dev \
    --to=sean.anderson@linux.dev \
    --cc=andrew+netdev@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=pabeni@redhat.com \
    --cc=upstream@airoha.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.