* [PATCH 0/3] HP EliteBook Ultra G1q support
@ 2025-04-04 9:01 Juerg Haefliger
2025-04-04 9:01 ` [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi Juerg Haefliger
` (3 more replies)
0 siblings, 4 replies; 36+ messages in thread
From: Juerg Haefliger @ 2025-04-04 9:01 UTC (permalink / raw)
To: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm,
devicetree
Cc: linux-kernel
Add support for the HP EliteBook Ultra G1q 14" AI laptop.
Based on HWINFO64 and APCI tables, it seems to be the same HW as the
HP OmniBook X 14.
This is the first time I'm fiddling with device trees so this is likely not
correct :-|
[1] https://www.hp.com/us-en/shop/pdp/hp-elitebook-ultra-14-inch-g1q-notebook-ai-pc
[2] https://github.com/aarch64-laptops/build/pull/135
Juerg Haefliger (3):
arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi
arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook
Ultra G1q
dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +
.../dts/qcom/x1e80100-hp-omnibook-x14.dts | 1554 +---------------
.../dts/qcom/x1e80100-hp-omnibook-x14.dtsi | 1557 +++++++++++++++++
drivers/firmware/qcom/qcom_scm.c | 1 +
6 files changed, 1597 insertions(+), 1553 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts
create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtsi
--
2.43.0
^ permalink raw reply [flat|nested] 36+ messages in thread* [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi 2025-04-04 9:01 [PATCH 0/3] HP EliteBook Ultra G1q support Juerg Haefliger @ 2025-04-04 9:01 ` Juerg Haefliger 2025-04-04 12:51 ` Krzysztof Kozlowski 2025-04-04 15:33 ` Rob Herring 2025-04-04 9:01 ` [PATCH 2/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q Juerg Haefliger ` (2 subsequent siblings) 3 siblings, 2 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-04 9:01 UTC (permalink / raw) To: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree Cc: linux-kernel Create a dtsi for the HP OmniBook so it can be reused for the HP EliteBook which seems to be the same HW. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 1554 +--------------- .../dts/qcom/x1e80100-hp-omnibook-x14.dtsi | 1557 +++++++++++++++++ 2 files changed, 1558 insertions(+), 1553 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtsi diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index 03bbebff4576..55c4835d19c3 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -1,1557 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. - * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com> - */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/gpio-keys.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" - -/ { - model = "HP Omnibook X 14"; - compatible = "hp,omnibook-x14", "qcom,x1e80100"; - chassis-type = "laptop"; - - aliases { - serial0 = &uart21; - serial1 = &uart14; - }; - - wcd938x: audio-codec { - compatible = "qcom,wcd9385-codec"; - - pinctrl-names = "default"; - pinctrl-0 = <&wcd_default>; - - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; - qcom,mbhc-headset-vthreshold-microvolt = <1700000>; - qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - qcom,rx-device = <&wcd_rx>; - qcom,tx-device = <&wcd_tx>; - - reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; - - vdd-buck-supply = <&vreg_l15b_1p8>; - vdd-rxtx-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l15b_1p8>; - vdd-mic-bias-supply = <&vreg_bob1>; - - #sound-dai-cells = <1>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pmk8550_pwm 0 5000000>; - - brightness-levels = <0 2048 4096 8192 16384 65535>; - num-interpolated-steps = <20>; - default-brightness-level = <80>; - - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; - power-supply = <&vreg_edp_bl>; - - pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; - pinctrl-names = "default"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&hall_int_n_default>; - pinctrl-names = "default"; - - switch-lid { - gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_SW>; - linux,code = <SW_LID>; - wakeup-source; - wakeup-event-action = <EV_ACT_DEASSERTED>; - }; - }; - - pmic-glink { - compatible = "qcom,x1e80100-pmic-glink", - "qcom,sm8550-pmic-glink", - "qcom,pmic-glink"; - orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, - <&tlmm 123 GPIO_ACTIVE_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - /* Left-side port, closer to the screen */ - connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss0_hs_in: endpoint { - remote-endpoint = <&usb_1_ss0_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&retimer_ss0_ss_out>; - }; - }; - - port@2 { - reg = <2>; - - pmic_glink_ss0_con_sbu_in: endpoint { - remote-endpoint = <&retimer_ss0_con_sbu_out>; - }; - }; - }; - }; - - /* Left-side port, farther from the screen */ - connector@1 { - compatible = "usb-c-connector"; - reg = <1>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss1_hs_in: endpoint { - remote-endpoint = <&usb_1_ss1_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; - }; - }; - }; - }; - }; - - reserved-memory { - linux,cma { - compatible = "shared-dma-pool"; - size = <0x0 0x8000000>; - reusable; - linux,cma-default; - }; - }; - - sound { - compatible = "qcom,x1e80100-sndcard"; - model = "X1E80100-HP-OMNIBOOK-X14"; - audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", - "SpkrRight IN", "WSA WSA_SPK2 OUT", - "IN1_HPHL", "HPHL_OUT", - "IN2_HPHR", "HPHR_OUT", - "AMIC2", "MIC BIAS2", - "VA DMIC0", "MIC BIAS3", - "VA DMIC1", "MIC BIAS3", - "VA DMIC2", "MIC BIAS1", - "VA DMIC3", "MIC BIAS1", - "VA DMIC0", "VA MIC BIAS3", - "VA DMIC1", "VA MIC BIAS3", - "VA DMIC2", "VA MIC BIAS1", - "VA DMIC3", "VA MIC BIAS1", - "TX SWR_INPUT1", "ADC2_OUTPUT"; - - wcd-playback-dai-link { - link-name = "WCD Playback"; - - cpu { - sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; - }; - - codec { - sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - wcd-capture-dai-link { - link-name = "WCD Capture"; - - cpu { - sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; - }; - - codec { - sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - wsa-dai-link { - link-name = "WSA Playback"; - - cpu { - sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; - }; - - codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - va-dai-link { - link-name = "VA Capture"; - - cpu { - sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; - }; - - codec { - sound-dai = <&lpass_vamacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - }; - - vreg_edp_3p3: regulator-edp-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_EDP_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&edp_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_edp_bl: regulator-edp-bl { - compatible = "regulator-fixed"; - - regulator-name = "VBL9"; - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&edp_bl_reg_en>; - - regulator-boot-on; - }; - - vreg_misc_3p3: regulator-misc-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_MISC_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&misc_3p3_reg_en>; - - regulator-boot-on; - regulator-always-on; - }; - - vreg_nvme: regulator-nvme { - compatible = "regulator-fixed"; - - regulator-name = "VREG_NVME_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&nvme_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_1p15: regulator-rtmr0-1p15 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_1P15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - - gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_pwr_1p15_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_1p8: regulator-rtmr0-1p8 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_1P8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_1p8_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_rtmr0_3p3: regulator-rtmr0-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_RTMR0_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&usb0_3p3_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_vph_pwr: regulator-vph-pwr { - compatible = "regulator-fixed"; - - regulator-name = "vreg_vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - - regulator-always-on; - regulator-boot-on; - }; - - vreg_wcn_3p3: regulator-wcn-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&wcn_sw_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - /* - * TODO: These two regulators are actually part of the removable M.2 - * card and not the CRD mainboard. Need to describe this differently. - * Functionally it works correctly, because all we need to do is to - * turn on the actual 3.3V supply above. - */ - vreg_wcn_0p95: regulator-wcn-0p95 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_0P95"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - - vin-supply = <&vreg_wcn_3p3>; - }; - - vreg_wcn_1p9: regulator-wcn-1p9 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_WCN_1P9"; - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - - vin-supply = <&vreg_wcn_3p3>; - }; - - wcn6855-pmu { - compatible = "qcom,wcn6855-pmu"; - - vddaon-supply = <&vreg_wcn_0p95>; - vddio-supply = <&vreg_wcn_1p9>; - vddpcie1p3-supply = <&vreg_wcn_1p9>; - vddpcie1p9-supply = <&vreg_wcn_1p9>; - vddpmu-supply = <&vreg_wcn_0p95>; - vddpmumx-supply = <&vreg_wcn_0p95>; - vddpmucx-supply = <&vreg_wcn_0p95>; - vddrfa0p95-supply = <&vreg_wcn_0p95>; - vddrfa1p3-supply = <&vreg_wcn_1p9>; - vddrfa1p9-supply = <&vreg_wcn_1p9>; - - wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; - bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&wcn_wlan_bt_en>; - pinctrl-names = "default"; - - regulators { - vreg_pmu_rfa_cmn_0p8: ldo0 { - regulator-name = "vreg_pmu_rfa_cmn_0p8"; - }; - - vreg_pmu_aon_0p8: ldo1 { - regulator-name = "vreg_pmu_aon_0p8"; - }; - - vreg_pmu_wlcx_0p8: ldo2 { - regulator-name = "vreg_pmu_wlcx_0p8"; - }; - - vreg_pmu_wlmx_0p8: ldo3 { - regulator-name = "vreg_pmu_wlmx_0p8"; - }; - - vreg_pmu_btcmx_0p8: ldo4 { - regulator-name = "vreg_pmu_btcmx_0p8"; - }; - - vreg_pmu_pcie_1p8: ldo5 { - regulator-name = "vreg_pmu_pcie_1p8"; - }; - - vreg_pmu_pcie_0p9: ldo6 { - regulator-name = "vreg_pmu_pcie_0p9"; - }; - - vreg_pmu_rfa_0p8: ldo7 { - regulator-name = "vreg_pmu_rfa_0p8"; - }; - - vreg_pmu_rfa_1p2: ldo8 { - regulator-name = "vreg_pmu_rfa_1p2"; - }; - - vreg_pmu_rfa_1p7: ldo9 { - regulator-name = "vreg_pmu_rfa_1p7"; - }; - }; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pm8550-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-bob1-supply = <&vreg_vph_pwr>; - vdd-bob2-supply = <&vreg_vph_pwr>; - vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; - vdd-l2-l13-l14-supply = <&vreg_bob1>; - vdd-l5-l16-supply = <&vreg_bob1>; - vdd-l6-l7-supply = <&vreg_bob2>; - vdd-l8-l9-supply = <&vreg_bob1>; - vdd-l12-supply = <&vreg_s5j_1p2>; - vdd-l15-supply = <&vreg_s4c_1p8>; - vdd-l17-supply = <&vreg_bob2>; - - vreg_bob1: bob1 { - regulator-name = "vreg_bob1"; - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_bob2: bob2 { - regulator-name = "vreg_bob2"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <3008000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1b_1p8: ldo1 { - regulator-name = "vreg_l1b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2b_3p0: ldo2 { - regulator-name = "vreg_l2b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4b_1p8: ldo4 { - regulator-name = "vreg_l4b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l5b_3p0: ldo5 { - regulator-name = "vreg_l5b_3p0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6b_1p8: ldo6 { - regulator-name = "vreg_l6b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7b_2p8: ldo7 { - regulator-name = "vreg_l7b_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8b_3p0: ldo8 { - regulator-name = "vreg_l8b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9b_2p9: ldo9 { - regulator-name = "vreg_l9b_2p9"; - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l10b_1p8: ldo10 { - regulator-name = "vreg_l10b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l12b_1p2: ldo12 { - regulator-name = "vreg_l12b_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; - }; - - vreg_l13b_3p0: ldo13 { - regulator-name = "vreg_l13b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l14b_3p0: ldo14 { - regulator-name = "vreg_l14b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l15b_1p8: ldo15 { - regulator-name = "vreg_l15b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; - }; - - vreg_l16b_2p9: ldo16 { - regulator-name = "vreg_l16b_2p9"; - regulator-min-microvolt = <2912000>; - regulator-max-microvolt = <2912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l17b_2p5: ldo17 { - regulator-name = "vreg_l17b_2p5"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2504000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-1 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-l1-supply = <&vreg_s5j_1p2>; - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s4-supply = <&vreg_vph_pwr>; - - vreg_s4c_1p8: smps4 { - regulator-name = "vreg_s4c_1p8"; - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1c_1p2: ldo1 { - regulator-name = "vreg_l1c_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2c_0p8: ldo2 { - regulator-name = "vreg_l2c_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3c_0p8: ldo3 { - regulator-name = "vreg_l3c_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-2 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "d"; - - vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s4c_1p8>; - vdd-s1-supply = <&vreg_vph_pwr>; - - vreg_l1d_0p8: ldo1 { - regulator-name = "vreg_l1d_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2d_0p9: ldo2 { - regulator-name = "vreg_l2d_0p9"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3d_1p8: ldo3 { - regulator-name = "vreg_l3d_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-3 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "e"; - - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s5j_1p2>; - - vreg_l2e_0p8: ldo2 { - regulator-name = "vreg_l2e_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3e_1p2: ldo3 { - regulator-name = "vreg_l3e_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-4 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "f"; - - vdd-l1-supply = <&vreg_s5j_1p2>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s5j_1p2>; - vdd-s1-supply = <&vreg_vph_pwr>; - - vreg_s1f_0p7: smps1 { - regulator-name = "vreg_s1f_0p7"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1f_1p0: ldo1 { - regulator-name = "vreg_l1f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2f_1p0: ldo2 { - regulator-name = "vreg_l2f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3f_1p0: ldo3 { - regulator-name = "vreg_l3f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-6 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "i"; - - vdd-l1-supply = <&vreg_s4c_1p8>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s1-supply = <&vreg_vph_pwr>; - vdd-s2-supply = <&vreg_vph_pwr>; - - vreg_s1i_0p9: smps1 { - regulator-name = "vreg_s1i_0p9"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s2i_1p0: smps2 { - regulator-name = "vreg_s2i_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1i_1p8: ldo1 { - regulator-name = "vreg_l1i_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2i_1p2: ldo2 { - regulator-name = "vreg_l2i_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3i_0p8: ldo3 { - regulator-name = "vreg_l3i_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-7 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "j"; - - vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s5-supply = <&vreg_vph_pwr>; - - vreg_s5j_1p2: smps5 { - regulator-name = "vreg_s5j_1p2"; - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1j_0p8: ldo1 { - regulator-name = "vreg_l1j_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2j_1p2: ldo2 { - regulator-name = "vreg_l2j_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3j_0p8: ldo3 { - regulator-name = "vreg_l3j_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; -}; - -&gpu { - status = "okay"; - - zap-shader { - firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn"; - }; -}; - -&i2c0 { - clock-frequency = <400000>; - - status = "okay"; - - keyboard@3a { - compatible = "hid-over-i2c"; - reg = <0x3a>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l12b_1p2>; - - pinctrl-0 = <&kybd_default>; - pinctrl-names = "default"; - - wakeup-source; - }; - - touchpad@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l12b_1p2>; - - pinctrl-0 = <&tpad_default>; - pinctrl-names = "default"; - - wakeup-source; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - status = "okay"; - - /* type-c PS8830 Retimer #2 0x8 */ - /* is active on Windows */ -}; - -&i2c3 { - clock-frequency = <400000>; - - status = "okay"; - - typec-mux@8 { - compatible = "parade,ps8830"; - reg = <0x08>; - - clocks = <&rpmhcc RPMH_RF_CLK3>; - - vdd-supply = <&vreg_rtmr0_1p15>; - vdd33-supply = <&vreg_rtmr0_3p3>; - vdd33-cap-supply = <&vreg_rtmr0_3p3>; - vddar-supply = <&vreg_rtmr0_1p15>; - vddat-supply = <&vreg_rtmr0_1p15>; - vddio-supply = <&vreg_rtmr0_1p8>; - - reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&rtmr0_default>; - pinctrl-names = "default"; - - orientation-switch; - retimer-switch; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - retimer_ss0_ss_out: endpoint { - remote-endpoint = <&pmic_glink_ss0_ss_in>; - }; - }; - - port@1 { - reg = <1>; - - retimer_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; - }; - }; - - port@2 { - reg = <2>; - - retimer_ss0_con_sbu_out: endpoint { - remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; - }; - }; - }; - }; -}; - -&i2c4 { - clock-frequency = <400000>; - - status = "okay"; - - /* is active on Windows */ -}; - -&i2c5 { - clock-frequency = <400000>; - status = "okay"; - - eusb3_repeater: redriver@47 { - compatible = "nxp,ptn3222"; - reg = <0x47>; - #phy-cells = <0>; - - vdd3v3-supply = <&vreg_l13b_3p0>; - vdd1v8-supply = <&vreg_l4b_1p8>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&eusb3_reset_n>; - pinctrl-names = "default"; - - }; -}; - -&i2c8 { - clock-frequency = <400000>; - - status = "okay"; - - touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l15b_1p8>; - - pinctrl-0 = <&ts0_default>; - pinctrl-names = "default"; - }; -}; - -&i2c9 { - clock-frequency = <400000>; - - status = "okay"; - - /* is active on Windows */ -}; - -&lpass_tlmm { - spkr_01_sd_n_active: spkr-01-sd-n-active-state { - pins = "gpio12"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-low; - }; -}; - -&lpass_vamacro { - pinctrl-0 = <&dmic01_default>, <&dmic23_default>; - pinctrl-names = "default"; - - vdd-micb-supply = <&vreg_l1b_1p8>; - qcom,dmic-sample-rate = <4800000>; -}; - -&mdss { - status = "okay"; -}; - -&mdss_dp0 { - status = "okay"; -}; - -&mdss_dp0_out { - data-lanes = <0 1>; -}; - -&mdss_dp1 { - status = "okay"; -}; - -&mdss_dp1_out { - data-lanes = <0 1>; -}; - -&mdss_dp3 { - compatible = "qcom,x1e80100-dp"; - /delete-property/ #sound-dai-cells; - - status = "okay"; - - aux-bus { - panel { - compatible = "edp-panel"; - power-supply = <&vreg_edp_3p3>; - - backlight = <&backlight>; - - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss_dp3_out>; - }; - }; - }; - }; - - ports { - port@1 { - reg = <1>; - - mdss_dp3_out: endpoint { - data-lanes = <0 1 2 3>; - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; - - remote-endpoint = <&edp_panel_in>; - }; - }; - }; -}; - -&mdss_dp3_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; - vdda-pll-supply = <&vreg_l2j_1p2>; - - status = "okay"; -}; - -&pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&pcie4_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie4_phy { - vdda-phy-supply = <&vreg_l3i_0p8>; - vdda-pll-supply = <&vreg_l3e_1p2>; - - status = "okay"; -}; - -&pcie4_port0 { - wifi@0 { - compatible = "pci17cb,1107"; - reg = <0x10000 0x0 0x0 0x0 0x0>; - - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; - vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; - }; -}; - -&pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; - - vddpe-3v3-supply = <&vreg_nvme>; - - pinctrl-0 = <&pcie6a_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie6a_phy { - vdda-phy-supply = <&vreg_l1d_0p8>; - vdda-pll-supply = <&vreg_l2j_1p2>; - - status = "okay"; -}; - -&pm8550_gpios { - rtmr0_default: rtmr0-reset-n-active-state { - pins = "gpio10"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; - - usb0_3p3_reg_en: usb0-3p3-reg-en-state { - pins = "gpio11"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pm8550ve_8_gpios { - misc_3p3_reg_en: misc-3p3-reg-en-state { - pins = "gpio6"; - function = "normal"; - bias-disable; - drive-push-pull; - input-disable; - output-enable; - power-source = <1>; /* 1.8 V */ - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; -}; - -&pm8550ve_9_gpios { - usb0_1p8_reg_en: usb0-1p8-reg-en-state { - pins = "gpio8"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&pmc8380_3_gpios { - edp_bl_en: edp-bl-en-state { - pins = "gpio4"; - function = "normal"; - power-source = <1>; /* 1.8V */ - input-disable; - output-enable; - }; - - edp_bl_reg_en: edp-bl-reg-en-state { - pins = "gpio10"; - function = "normal"; - }; - -}; - -&pmk8550_gpios { - edp_bl_pwm: edp-bl-pwm-state { - pins = "gpio5"; - function = "func3"; - }; -}; - -&pmk8550_pwm { - status = "okay"; -}; - -&pmc8380_5_gpios { - usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { - pins = "gpio8"; - function = "normal"; - power-source = <1>; /* 1.8V */ - bias-disable; - input-disable; - output-enable; - }; -}; - -&qupv3_0 { - status = "okay"; -}; - -&qupv3_1 { - status = "okay"; -}; - -&qupv3_2 { - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcadsp8380.mbn", - "qcom/x1e80100/hp/omnibook-x14/adsp_dtbs.elf"; - - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/x1e80100/hp/omnibook-x14/qccdsp8380.mbn", - "qcom/x1e80100/hp/omnibook-x14/cdsp_dtbs.elf"; - - status = "okay"; -}; - -&smb2360_0 { - status = "okay"; -}; - -&smb2360_0_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l2b_3p0>; -}; - -&smb2360_1 { - status = "okay"; -}; - -&smb2360_1_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l14b_3p0>; -}; - -&swr0 { - pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; - pinctrl-names = "default"; - - status = "okay"; - - /* WSA8845, Left Speaker */ - left_spkr: speaker@0,0 { - compatible = "sdw20217020400"; - reg = <0 0>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - sound-name-prefix = "SpkrLeft"; - vdd-1p8-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l12b_1p2>; - qcom,port-mapping = <1 2 3 7 10 13>; - }; - - /* WSA8845, Right Speaker */ - right_spkr: speaker@0,1 { - compatible = "sdw20217020400"; - reg = <0 1>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - sound-name-prefix = "SpkrRight"; - vdd-1p8-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l12b_1p2>; - qcom,port-mapping = <4 5 6 7 11 13>; - }; -}; - -&swr1 { - status = "okay"; - - /* WCD9385 RX */ - wcd_rx: codec@0,4 { - compatible = "sdw20217010d00"; - reg = <0 4>; - qcom,rx-port-mapping = <1 2 3 4 5>; - }; -}; - -&swr2 { - status = "okay"; - - /* WCD9385 TX */ - wcd_tx: codec@0,3 { - compatible = "sdw20217010d00"; - reg = <0 3>; - qcom,tx-port-mapping = <2 2 3 4>; - }; -}; - -&tlmm { - gpio-reserved-ranges = <34 2>, /* Unused */ - <44 4>, /* SPI (TPM) */ - <72 2>, /* Secure EC I2C connection (?) */ - <238 1>; /* UFS Reset */ - - bt_en_default: bt-en-sleep { - pins = "gpio116"; - function = "gpio"; - output-low; - bias-disable; - drive-strength = <16>; - }; - - edp_reg_en: edp-reg-en-state { - pins = "gpio70"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - eusb3_reset_n: eusb3-reset-n-state { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-low; - }; - - hall_int_n_default: hall-int-n-state { - pins = "gpio92"; - function = "gpio"; - bias-disable; - }; - - kybd_default: kybd-default-state { - pins = "gpio67"; - function = "gpio"; - bias-pull-up; - }; - - nvme_reg_en: nvme-reg-en-state { - pins = "gpio18"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - pcie4_default: pcie4-default-state { - clkreq-n-pins { - pins = "gpio147"; - function = "pcie4_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio146"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio148"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie6a_default: pcie6a-default-state { - clkreq-n-pins { - pins = "gpio153"; - function = "pcie6a_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio152"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio154"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - tpad_default: tpad-default-state { - pins = "gpio3"; - function = "gpio"; - bias-pull-up; - }; - - ts0_default: ts0-default-state { - int-n-pins { - pins = "gpio51"; - function = "gpio"; - bias-pull-up; - }; - - reset-n-pins { - pins = "gpio48"; - function = "gpio"; - output-high; - drive-strength = <16>; - }; - }; - - wcd_default: wcd-reset-n-active-state { - pins = "gpio191"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-low; - }; - - wcn_sw_en: wcn-sw-en-state { - pins = "gpio214"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wcn_wlan_bt_en: wcn-wlan-bt-en-state { - pins = "gpio116", "gpio117"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; - -&uart14 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn6855-bt"; - max-speed = <3200000>; - - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; - vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - }; -}; - -&usb_1_ss0_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_0_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss0_qmpphy { - vdda-phy-supply = <&vreg_l3e_1p2>; - vdda-pll-supply = <&vreg_l1j_0p8>; - - status = "okay"; -}; - -&usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss0_dwc3_hs { - remote-endpoint = <&pmic_glink_ss0_hs_in>; -}; - -&usb_1_ss0_qmpphy_out { - remote-endpoint = <&retimer_ss0_ss_in>; -}; - -&usb_1_ss1_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_1_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss1_qmpphy { - vdda-phy-supply = <&vreg_l3e_1p2>; - vdda-pll-supply = <&vreg_l2d_0p9>; - - status = "okay"; -}; - -&usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss1_dwc3_hs { - remote-endpoint = <&pmic_glink_ss1_hs_in>; -}; - -&usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; -}; - -&usb_mp { - status = "okay"; -}; - -&usb_mp_dwc3 { - phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>; - phy-names = "usb2-0", "usb3-0"; -}; - -&usb_mp_hsphy0 { - vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; - - phys = <&eusb3_repeater>; - - status = "okay"; -}; - -&usb_mp_qmpphy0 { - vdda-phy-supply = <&vreg_l3e_1p2>; - vdda-pll-supply = <&vreg_l3c_0p8>; - - status = "okay"; -}; +#include "x1e80100-hp-omnibook-x14.dtsi" diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtsi new file mode 100644 index 000000000000..03bbebff4576 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtsi @@ -0,0 +1,1557 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "HP Omnibook X 14"; + compatible = "hp,omnibook-x14", "qcom,x1e80100"; + chassis-type = "laptop"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 5000000>; + + brightness-levels = <0 2048 4096 8192 16384 65535>; + num-interpolated-steps = <20>; + default-brightness-level = <80>; + + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Left-side port, closer to the screen */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + /* Left-side port, farther from the screen */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-HP-OMNIBOOK-X14"; + audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", + "SpkrRight IN", "WSA WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS3", + "VA DMIC1", "VA MIC BIAS3", + "VA DMIC2", "VA MIC BIAS1", + "VA DMIC3", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vreg_vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the CRD mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + vddaon-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_wcn_1p9>; + vddpcie1p3-supply = <&vreg_wcn_1p9>; + vddpcie1p9-supply = <&vreg_wcn_1p9>; + vddpmu-supply = <&vreg_wcn_0p95>; + vddpmumx-supply = <&vreg_wcn_0p95>; + vddpmucx-supply = <&vreg_wcn_0p95>; + vddrfa0p95-supply = <&vreg_wcn_0p95>; + vddrfa1p3-supply = <&vreg_wcn_1p9>; + vddrfa1p9-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vreg_vph_pwr>; + vdd-bob2-supply = <&vreg_vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p0: ldo5 { + regulator-name = "vreg_l5b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l16b_2p9: ldo16 { + regulator-name = "vreg_l16b_2p9"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vreg_vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vreg_vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vreg_vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vreg_vph_pwr>; + vdd-s2-supply = <&vreg_vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vreg_vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + status = "okay"; + + /* type-c PS8830 Retimer #2 0x8 */ + /* is active on Windows */ +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + status = "okay"; + + /* is active on Windows */ +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + eusb3_repeater: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + + status = "okay"; + + /* is active on Windows */ +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + backlight = <&backlight>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + }; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + drive-push-pull; + input-disable; + output-enable; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; /* 1.8V */ + input-disable; + output-enable; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; + +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcadsp8380.mbn", + "qcom/x1e80100/hp/omnibook-x14/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/hp/omnibook-x14/qccdsp8380.mbn", + "qcom/x1e80100/hp/omnibook-x14/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&swr0 { + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + status = "okay"; + + /* WSA8845, Left Speaker */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Speaker */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <72 2>, /* Secure EC I2C connection (?) */ + <238 1>; /* UFS Reset */ + + bt_en_default: bt-en-sleep { + pins = "gpio116"; + function = "gpio"; + output-low; + bias-disable; + drive-strength = <16>; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + max-speed = <3200000>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_dwc3 { + phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>; + phy-names = "usb2-0", "usb3-0"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb3_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi 2025-04-04 9:01 ` [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi Juerg Haefliger @ 2025-04-04 12:51 ` Krzysztof Kozlowski 2025-04-07 9:20 ` Juerg Haefliger 2025-04-04 15:33 ` Rob Herring 1 sibling, 1 reply; 36+ messages in thread From: Krzysztof Kozlowski @ 2025-04-04 12:51 UTC (permalink / raw) To: Juerg Haefliger, andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree Cc: linux-kernel On 04/04/2025 11:01, Juerg Haefliger wrote: > Create a dtsi for the HP OmniBook so it can be reused for the HP EliteBook > which seems to be the same HW. > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > --- > .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 1554 +--------------- > .../dts/qcom/x1e80100-hp-omnibook-x14.dtsi | 1557 +++++++++++++++++ > 2 files changed, 1558 insertions(+), 1553 deletions(-) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtsi Very difficult to review. This should have been rename. You are not using b4, so you can tweak -M/-B/-C parameters. I also do not understand what the DTSI represents. The DTSI files should be some sort of common hardware, design, product. Are you sure these devices share the design? Best regards, Krzysztof ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi 2025-04-04 12:51 ` Krzysztof Kozlowski @ 2025-04-07 9:20 ` Juerg Haefliger 0 siblings, 0 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-07 9:20 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel [-- Attachment #1: Type: text/plain, Size: 1421 bytes --] On Fri, 4 Apr 2025 14:51:54 +0200 Krzysztof Kozlowski <krzk@kernel.org> wrote: > On 04/04/2025 11:01, Juerg Haefliger wrote: > > Create a dtsi for the HP OmniBook so it can be reused for the HP EliteBook > > which seems to be the same HW. > > > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > > --- > > .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 1554 +--------------- > > .../dts/qcom/x1e80100-hp-omnibook-x14.dtsi | 1557 +++++++++++++++++ > > 2 files changed, 1558 insertions(+), 1553 deletions(-) > > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtsi > > Very difficult to review. This should have been rename. You are not > using b4, so you can tweak -M/-B/-C parameters. Not sure what that means, but OK :-) > > > I also do not understand what the DTSI represents. The DTSI files should > be some sort of common hardware, design, product. Are you sure these > devices share the design? Yes, pretty much. OmniBook: mainboard 8CBE, version 17.39 EliteBook: mainboard 8CBE, version 17.40 HWinfo from Windows looks identical. DSDT are identical except that the EliteBook has two additional nodes \_SB_.GPU0.PBRT.RBF5 and \_SB_.GPU0.PBRT.RBF6. Not sure what those are, maybe due to different BIOS versions? Using the current OmniBook dtb works with my EliteBook. ...Juerg > > Best regards, > Krzysztof [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi 2025-04-04 9:01 ` [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi Juerg Haefliger 2025-04-04 12:51 ` Krzysztof Kozlowski @ 2025-04-04 15:33 ` Rob Herring 2025-04-07 9:21 ` Juerg Haefliger 1 sibling, 1 reply; 36+ messages in thread From: Rob Herring @ 2025-04-04 15:33 UTC (permalink / raw) To: Juerg Haefliger Cc: andersson, konradybcio, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel On Fri, Apr 04, 2025 at 11:01:06AM +0200, Juerg Haefliger wrote: > Create a dtsi for the HP OmniBook so it can be reused for the HP EliteBook > which seems to be the same HW. > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > --- > .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 1554 +--------------- > .../dts/qcom/x1e80100-hp-omnibook-x14.dtsi | 1557 +++++++++++++++++ Just include x1e80100-hp-omnibook-x14.dts where you need it. There is no rule against including .dts files. Rob ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi 2025-04-04 15:33 ` Rob Herring @ 2025-04-07 9:21 ` Juerg Haefliger 0 siblings, 0 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-07 9:21 UTC (permalink / raw) To: Rob Herring Cc: andersson, konradybcio, krzk+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel [-- Attachment #1: Type: text/plain, Size: 681 bytes --] On Fri, 4 Apr 2025 10:33:39 -0500 Rob Herring <robh@kernel.org> wrote: > On Fri, Apr 04, 2025 at 11:01:06AM +0200, Juerg Haefliger wrote: > > Create a dtsi for the HP OmniBook so it can be reused for the HP EliteBook > > which seems to be the same HW. > > > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > > --- > > .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 1554 +--------------- > > .../dts/qcom/x1e80100-hp-omnibook-x14.dtsi | 1557 +++++++++++++++++ > > Just include x1e80100-hp-omnibook-x14.dts where you need it. There is no > rule against including .dts files. Ah that makes it easier. Thanks. ...Juerg > > Rob [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 2/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-04 9:01 [PATCH 0/3] HP EliteBook Ultra G1q support Juerg Haefliger 2025-04-04 9:01 ` [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi Juerg Haefliger @ 2025-04-04 9:01 ` Juerg Haefliger 2025-04-04 12:53 ` Krzysztof Kozlowski 2025-04-04 9:01 ` [PATCH 3/3] dt-bindings: arm: qcom: Document " Juerg Haefliger 2025-04-08 14:52 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Juerg Haefliger 3 siblings, 1 reply; 36+ messages in thread From: Juerg Haefliger @ 2025-04-04 9:01 UTC (permalink / raw) To: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree Cc: linux-kernel Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It seems to be using the same baseboard as the HP OmniBook X 14 so just use that for now. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +++++++++++++++++++ drivers/firmware/qcom/qcom_scm.c | 1 + 3 files changed, 38 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 710879d94c00..3d98bb95e8b1 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -294,6 +294,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts new file mode 100644 index 000000000000..7f069a2e9a46 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "x1e80100-hp-omnibook-x14.dtsi" + +/ { + model = "HP EliteBook Ultra G1q"; + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; + + sound { + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn", + "qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn", + "qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf"; + + status = "okay"; +}; diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index fc4d67e4c4a6..e7262ad11509 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -1987,6 +1987,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { { .compatible = "asus,vivobook-s15" }, { .compatible = "dell,xps13-9345" }, + { .compatible = "hp,elitebook-ultra-g1q" }, { .compatible = "hp,omnibook-x14" }, { .compatible = "huawei,gaokun3" }, { .compatible = "lenovo,flex-5g" }, -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-04 9:01 ` [PATCH 2/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q Juerg Haefliger @ 2025-04-04 12:53 ` Krzysztof Kozlowski 0 siblings, 0 replies; 36+ messages in thread From: Krzysztof Kozlowski @ 2025-04-04 12:53 UTC (permalink / raw) To: Juerg Haefliger, andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree Cc: linux-kernel On 04/04/2025 11:01, Juerg Haefliger wrote: > Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It > seems to be using the same baseboard as the HP OmniBook X 14 so just use > that for now. > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +++++++++++++++++++ > drivers/firmware/qcom/qcom_scm.c | 1 + > 3 files changed, 38 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 710879d94c00..3d98bb95e8b1 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -294,6 +294,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > new file mode 100644 > index 000000000000..7f069a2e9a46 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > @@ -0,0 +1,36 @@ > +// SPDX-License-Identifier: BSD-3-Clause > + > +/dts-v1/; > + > +#include "x1e80100-hp-omnibook-x14.dtsi" > + > +/ { > + model = "HP EliteBook Ultra G1q"; > + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; > + > + sound { Please override by label/phandle. > + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; > + }; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; > + }; > +}; so here &sound {} The other DTS also should have it model overridden, because otherwise you claim that "X1E80100-HP-OMNIBOOK-X14" is the common card. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH 3/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q 2025-04-04 9:01 [PATCH 0/3] HP EliteBook Ultra G1q support Juerg Haefliger 2025-04-04 9:01 ` [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi Juerg Haefliger 2025-04-04 9:01 ` [PATCH 2/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q Juerg Haefliger @ 2025-04-04 9:01 ` Juerg Haefliger 2025-04-04 12:48 ` Krzysztof Kozlowski 2025-04-08 14:52 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Juerg Haefliger 3 siblings, 1 reply; 36+ messages in thread From: Juerg Haefliger @ 2025-04-04 9:01 UTC (permalink / raw) To: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree Cc: linux-kernel Add a compatible for the HP EliteBook Ultra G1q 14 inch Notebook AI PC. The laptop is based on the Snapdragon X Elite (x1e80100) SoC. PDF link: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c08996392 Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 6260839fe972..1f2a26ac33b9 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1133,6 +1133,7 @@ properties: - enum: - asus,vivobook-s15 - dell,xps13-9345 + - hp,elitebook-ultra-g1q - hp,omnibook-x14 - lenovo,yoga-slim7x - microsoft,romulus13 -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH 3/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q 2025-04-04 9:01 ` [PATCH 3/3] dt-bindings: arm: qcom: Document " Juerg Haefliger @ 2025-04-04 12:48 ` Krzysztof Kozlowski 0 siblings, 0 replies; 36+ messages in thread From: Krzysztof Kozlowski @ 2025-04-04 12:48 UTC (permalink / raw) To: Juerg Haefliger, andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree Cc: linux-kernel On 04/04/2025 11:01, Juerg Haefliger wrote: > Add a compatible for the HP EliteBook Ultra G1q 14 inch Notebook AI PC. > The laptop is based on the Snapdragon X Elite (x1e80100) SoC. > > PDF link: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c08996392 > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> If there is going to be new version, please re-order so this goes before the user of the binding. Anyway: Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v2 0/3] HP EliteBook Ultra G1q support 2025-04-04 9:01 [PATCH 0/3] HP EliteBook Ultra G1q support Juerg Haefliger ` (2 preceding siblings ...) 2025-04-04 9:01 ` [PATCH 3/3] dt-bindings: arm: qcom: Document " Juerg Haefliger @ 2025-04-08 14:52 ` Juerg Haefliger 2025-04-08 14:52 ` [PATCH v2 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger ` (4 more replies) 3 siblings, 5 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-08 14:52 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add support for the HP EliteBook Ultra G1q 14" AI laptop. Based on HWINFO64 and APCI tables, it seems to be the same HW as the HP OmniBook X 14. v1->v2: - Don't rename the X14 dts to dtsi and directly include the dts - Add a label to the sound node and use that to override the model - Reorder the dt doc patch before the dt usage Juerg Haefliger (3): arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +++++++++++++++++++ .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 ++-- drivers/firmware/qcom/qcom_scm.c | 1 + 5 files changed, 44 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts -- 2.43.0 ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v2 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model 2025-04-08 14:52 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Juerg Haefliger @ 2025-04-08 14:52 ` Juerg Haefliger 2025-04-10 5:17 ` Maud Spierings 2025-04-08 14:52 ` [PATCH v2 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger ` (3 subsequent siblings) 4 siblings, 1 reply; 36+ messages in thread From: Juerg Haefliger @ 2025-04-08 14:52 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add a label to the sound node and pull out the model name to make it explicit and easier to override it from other nodes. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index 03bbebff4576..06a53b3e8cb9 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -166,9 +166,8 @@ linux,cma { }; }; - sound { + sound: sound { compatible = "qcom,x1e80100-sndcard"; - model = "X1E80100-HP-OMNIBOOK-X14"; audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", "SpkrRight IN", "WSA WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", @@ -1555,3 +1554,7 @@ &usb_mp_qmpphy0 { status = "okay"; }; + +&sound { + model = "X1E80100-HP-OMNIBOOK-X14"; +}; -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH v2 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model 2025-04-08 14:52 ` [PATCH v2 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger @ 2025-04-10 5:17 ` Maud Spierings 2025-04-10 5:37 ` Maud Spierings 0 siblings, 1 reply; 36+ messages in thread From: Maud Spierings @ 2025-04-10 5:17 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh > Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It > seems to be using the same baseboard as the HP OmniBook X 14 so just use > that for now. > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +++++++++++++++++++ > drivers/firmware/qcom/qcom_scm.c | 1 + > 3 files changed, 38 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 710879d94c00..3d98bb95e8b1 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -294,6 +294,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > new file mode 100644 > index 000000000000..9f3aac1a83fd > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > @@ -0,0 +1,36 @@ > +// SPDX-License-Identifier: BSD-3-Clause > + > +/dts-v1/; > + > +#include "x1e80100-hp-omnibook-x14.dts" > + > +/ { > + model = "HP EliteBook Ultra G1q"; > + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; > +}; > + > +&gpu { > + status = "okay"; status should not be needed as it is already set in the omnibook dts > + > + zap-shader { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; > + }; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn", > + "qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf"; > + > + status = "okay"; same here > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn", > + "qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf"; > + > + status = "okay"; same here Kind regards, Maud > +}; > + > +&sound { > + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; > +}; > diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c > index fc4d67e4c4a6..e7262ad11509 100644 > --- a/drivers/firmware/qcom/qcom_scm.c > +++ b/drivers/firmware/qcom/qcom_scm.c > @@ -1987,6 +1987,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); > static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { > { .compatible = "asus,vivobook-s15" }, > { .compatible = "dell,xps13-9345" }, > + { .compatible = "hp,elitebook-ultra-g1q" }, > { .compatible = "hp,omnibook-x14" }, > { .compatible = "huawei,gaokun3" }, > { .compatible = "lenovo,flex-5g" }, > -- > 2.43.0 ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v2 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model 2025-04-10 5:17 ` Maud Spierings @ 2025-04-10 5:37 ` Maud Spierings 0 siblings, 0 replies; 36+ messages in thread From: Maud Spierings @ 2025-04-10 5:37 UTC (permalink / raw) To: maud_spierings Cc: andersson, conor+dt, devicetree, juerg.haefliger, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Ignore this message I reply to, I replied to the wrong patch accidentaly. Sorry all. Kind regards, Maud>> Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It >> seems to be using the same baseboard as the HP OmniBook X 14 so just use >> that for now. >> >> Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +++++++++++++++++++ >> drivers/firmware/qcom/qcom_scm.c | 1 + >> 3 files changed, 38 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 710879d94c00..3d98bb95e8b1 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -294,6 +294,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb >> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb >> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb >> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb >> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb >> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb >> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb >> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts >> new file mode 100644 >> index 000000000000..9f3aac1a83fd >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts >> @@ -0,0 +1,36 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> + >> +/dts-v1/; >> + >> +#include "x1e80100-hp-omnibook-x14.dts" >> + >> +/ { >> + model = "HP EliteBook Ultra G1q"; >> + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; >> +}; >> + >> +&gpu { >> + status = "okay"; > > status should not be needed as it is already set in the omnibook dts > >> + >> + zap-shader { >> + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; >> + }; >> +}; >> + >> +&remoteproc_adsp { >> + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn", >> + "qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf"; >> + >> + status = "okay"; > > same here > >> +}; >> + >> +&remoteproc_cdsp { >> + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn", >> + "qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf"; >> + >> + status = "okay"; > > same here > > Kind regards, > Maud > >> +}; >> + >> +&sound { >> + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; >> +}; >> diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c >> index fc4d67e4c4a6..e7262ad11509 100644 >> --- a/drivers/firmware/qcom/qcom_scm.c >> +++ b/drivers/firmware/qcom/qcom_scm.c >> @@ -1987,6 +1987,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); >> static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { >> { .compatible = "asus,vivobook-s15" }, >> { .compatible = "dell,xps13-9345" }, >> + { .compatible = "hp,elitebook-ultra-g1q" }, >> { .compatible = "hp,omnibook-x14" }, >> { .compatible = "huawei,gaokun3" }, >> { .compatible = "lenovo,flex-5g" }, >> -- >> 2.43.0 ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v2 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q 2025-04-08 14:52 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Juerg Haefliger 2025-04-08 14:52 ` [PATCH v2 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger @ 2025-04-08 14:52 ` Juerg Haefliger 2025-04-08 17:48 ` Rob Herring (Arm) 2025-04-08 14:52 ` [PATCH v2 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger ` (2 subsequent siblings) 4 siblings, 1 reply; 36+ messages in thread From: Juerg Haefliger @ 2025-04-08 14:52 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add a compatible for the HP EliteBook Ultra G1q 14 inch Notebook AI PC. The laptop is based on the Snapdragon X Elite (x1e80100) SoC. PDF link: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c08996392 Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 6260839fe972..1f2a26ac33b9 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1133,6 +1133,7 @@ properties: - enum: - asus,vivobook-s15 - dell,xps13-9345 + - hp,elitebook-ultra-g1q - hp,omnibook-x14 - lenovo,yoga-slim7x - microsoft,romulus13 -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH v2 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q 2025-04-08 14:52 ` [PATCH v2 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger @ 2025-04-08 17:48 ` Rob Herring (Arm) 0 siblings, 0 replies; 36+ messages in thread From: Rob Herring (Arm) @ 2025-04-08 17:48 UTC (permalink / raw) To: Juerg Haefliger Cc: andersson, linux-arm-msm, devicetree, konradybcio, conor+dt, krzk+dt, linux-kernel On Tue, 08 Apr 2025 16:52:50 +0200, Juerg Haefliger wrote: > Add a compatible for the HP EliteBook Ultra G1q 14 inch Notebook AI PC. > The laptop is based on the Snapdragon X Elite (x1e80100) SoC. > > PDF link: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c08996392 > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > --- > Documentation/devicetree/bindings/arm/qcom.yaml | 1 + > 1 file changed, 1 insertion(+) > Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. If a tag was not added on purpose, please state why and what changed. Missing tags: Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v2 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-08 14:52 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Juerg Haefliger 2025-04-08 14:52 ` [PATCH v2 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger 2025-04-08 14:52 ` [PATCH v2 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger @ 2025-04-08 14:52 ` Juerg Haefliger 2025-04-10 5:34 ` Maud Spierings 2025-04-09 14:14 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Rob Herring (Arm) 2025-04-16 9:42 ` [PATCH v3 " Juerg Haefliger 4 siblings, 1 reply; 36+ messages in thread From: Juerg Haefliger @ 2025-04-08 14:52 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It seems to be using the same baseboard as the HP OmniBook X 14 so just use that for now. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +++++++++++++++++++ drivers/firmware/qcom/qcom_scm.c | 1 + 3 files changed, 38 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 710879d94c00..3d98bb95e8b1 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -294,6 +294,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts new file mode 100644 index 000000000000..9f3aac1a83fd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "x1e80100-hp-omnibook-x14.dts" + +/ { + model = "HP EliteBook Ultra G1q"; + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn", + "qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn", + "qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&sound { + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; +}; diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index fc4d67e4c4a6..e7262ad11509 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -1987,6 +1987,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { { .compatible = "asus,vivobook-s15" }, { .compatible = "dell,xps13-9345" }, + { .compatible = "hp,elitebook-ultra-g1q" }, { .compatible = "hp,omnibook-x14" }, { .compatible = "huawei,gaokun3" }, { .compatible = "lenovo,flex-5g" }, -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH v2 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-08 14:52 ` [PATCH v2 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger @ 2025-04-10 5:34 ` Maud Spierings 2025-04-10 16:41 ` Konrad Dybcio 0 siblings, 1 reply; 36+ messages in thread From: Maud Spierings @ 2025-04-10 5:34 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Sorry I messed up and replied to the wrong patch somehow, this comment was meant for this patch. > Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It > seems to be using the same baseboard as the HP OmniBook X 14 so just use > that for now. > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +++++++++++++++++++ > drivers/firmware/qcom/qcom_scm.c | 1 + > 3 files changed, 38 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 710879d94c00..3d98bb95e8b1 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -294,6 +294,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > new file mode 100644 > index 000000000000..9f3aac1a83fd > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > @@ -0,0 +1,36 @@ > +// SPDX-License-Identifier: BSD-3-Clause > + > +/dts-v1/; > + > +#include "x1e80100-hp-omnibook-x14.dts" > + > +/ { > + model = "HP EliteBook Ultra G1q"; > + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; > +}; > + > +&gpu { > + status = "okay"; status should not be needed as it is already set in the omnibook dts > + > + zap-shader { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; > + }; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn", > + "qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf"; > + > + status = "okay"; same here > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn", > + "qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf"; > + > + status = "okay"; same here Kind regards, Maud > +}; > + > +&sound { > + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; > +}; > diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c > index fc4d67e4c4a6..e7262ad11509 100644 > --- a/drivers/firmware/qcom/qcom_scm.c > +++ b/drivers/firmware/qcom/qcom_scm.c > @@ -1987,6 +1987,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); > static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { > { .compatible = "asus,vivobook-s15" }, > { .compatible = "dell,xps13-9345" }, > + { .compatible = "hp,elitebook-ultra-g1q" }, > { .compatible = "hp,omnibook-x14" }, > { .compatible = "huawei,gaokun3" }, > { .compatible = "lenovo,flex-5g" }, > -- > 2.43.0 ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v2 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-10 5:34 ` Maud Spierings @ 2025-04-10 16:41 ` Konrad Dybcio 2025-04-11 11:05 ` Johan Hovold 0 siblings, 1 reply; 36+ messages in thread From: Konrad Dybcio @ 2025-04-10 16:41 UTC (permalink / raw) To: Maud Spierings, juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh On 4/10/25 7:34 AM, Maud Spierings wrote: > Sorry I messed up and replied to the wrong patch somehow, this comment was meant for this patch. > >> Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It >> seems to be using the same baseboard as the HP OmniBook X 14 so just use >> that for now. https://lore.kernel.org/lkml/20230510183423.never.877-kees@kernel.org/ Konrad ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v2 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-10 16:41 ` Konrad Dybcio @ 2025-04-11 11:05 ` Johan Hovold 0 siblings, 0 replies; 36+ messages in thread From: Johan Hovold @ 2025-04-11 11:05 UTC (permalink / raw) To: Konrad Dybcio Cc: Maud Spierings, juerg.haefliger, andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh On Thu, Apr 10, 2025 at 06:41:17PM +0200, Konrad Dybcio wrote: > On 4/10/25 7:34 AM, Maud Spierings wrote: > > Sorry I messed up and replied to the wrong patch somehow, this comment was meant for this patch. > > > >> Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It > >> seems to be using the same baseboard as the HP OmniBook X 14 so just use > >> that for now. > > https://lore.kernel.org/lkml/20230510183423.never.877-kees@kernel.org/ It seems you missed Maud's inline comments: https://lore.kernel.org/lkml/AM7P189MB100977CCFD602396E8F01FCBE3B72@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/ Johan ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v2 0/3] HP EliteBook Ultra G1q support 2025-04-08 14:52 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Juerg Haefliger ` (2 preceding siblings ...) 2025-04-08 14:52 ` [PATCH v2 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger @ 2025-04-09 14:14 ` Rob Herring (Arm) 2025-04-16 9:42 ` [PATCH v3 " Juerg Haefliger 4 siblings, 0 replies; 36+ messages in thread From: Rob Herring (Arm) @ 2025-04-09 14:14 UTC (permalink / raw) To: Juerg Haefliger Cc: andersson, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, conor+dt On Tue, 08 Apr 2025 16:52:48 +0200, Juerg Haefliger wrote: > Add support for the HP EliteBook Ultra G1q 14" AI laptop. > > Based on HWINFO64 and APCI tables, it seems to be the same HW as the > HP OmniBook X 14. > > v1->v2: > - Don't rename the X14 dts to dtsi and directly include the dts > - Add a label to the sound node and use that to override the model > - Reorder the dt doc patch before the dt usage > > Juerg Haefliger (3): > arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull > out the model > dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q > arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook > Ultra G1q > > .../devicetree/bindings/arm/qcom.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 36 +++++++++++++++++++ > .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 ++-- > drivers/firmware/qcom/qcom_scm.c | 1 + > 5 files changed, 44 insertions(+), 2 deletions(-) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > > -- > 2.43.0 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Base: attempting to guess base-commit... Base: tags/v6.15-rc1-3-gb09878285d23 (best guess, 1/4 blobs matched) If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250408145252.581060-1-juerg.haefliger@canonical.com: arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dtb: pinctrl@f100000 (qcom,x1e80100-tlmm): Unevaluated properties are not allowed ('bt-en-sleep' was unexpected) from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 0/3] HP EliteBook Ultra G1q support 2025-04-08 14:52 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Juerg Haefliger ` (3 preceding siblings ...) 2025-04-09 14:14 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Rob Herring (Arm) @ 2025-04-16 9:42 ` Juerg Haefliger 2025-04-16 9:42 ` [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger ` (4 more replies) 4 siblings, 5 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-16 9:42 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add support for the HP EliteBook Ultra G1q 14" AI laptop. Based on HWINFO64 and APCI tables, it seems to be the same HW as the HP OmniBook X 14. v2->v3: - Drop status properties from nodes in patch 3/3 - Add acked-by-krzk to patch 2/3 v1->v2: - Don't rename the X14 dts to dtsi and directly include the dts - Add a label to the sound node and use that to override the model - Reorder the dt doc patch before the dt usage Juerg Haefliger (3): arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 30 +++++++++++++++++++ .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 +++-- drivers/firmware/qcom/qcom_scm.c | 1 + 5 files changed, 38 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts -- 2.43.0 ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model 2025-04-16 9:42 ` [PATCH v3 " Juerg Haefliger @ 2025-04-16 9:42 ` Juerg Haefliger 2025-04-25 19:44 ` Dmitry Baryshkov 2025-04-16 9:42 ` [PATCH v3 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger ` (3 subsequent siblings) 4 siblings, 1 reply; 36+ messages in thread From: Juerg Haefliger @ 2025-04-16 9:42 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add a label to the sound node and pull out the model name to make it explicit and easier to override it from other nodes. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index cd860a246c45..9595ced8b2cc 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -174,9 +174,8 @@ linux,cma { }; }; - sound { + sound: sound { compatible = "qcom,x1e80100-sndcard"; - model = "X1E80100-HP-OMNIBOOK-X14"; audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", "SpkrRight IN", "WSA WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", @@ -1691,3 +1690,7 @@ &usb_mp_qmpphy0 { status = "okay"; }; + +&sound { + model = "X1E80100-HP-OMNIBOOK-X14"; +}; -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model 2025-04-16 9:42 ` [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger @ 2025-04-25 19:44 ` Dmitry Baryshkov 2025-04-26 7:45 ` Juerg Haefliger 0 siblings, 1 reply; 36+ messages in thread From: Dmitry Baryshkov @ 2025-04-25 19:44 UTC (permalink / raw) To: Juerg Haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh On Wed, Apr 16, 2025 at 11:42:34AM +0200, Juerg Haefliger wrote: > Add a label to the sound node and pull out the model name to make it > explicit and easier to override it from other nodes. > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > --- > arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > index cd860a246c45..9595ced8b2cc 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > @@ -174,9 +174,8 @@ linux,cma { > }; > }; > > - sound { > + sound: sound { > compatible = "qcom,x1e80100-sndcard"; > - model = "X1E80100-HP-OMNIBOOK-X14"; > audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", > "SpkrRight IN", "WSA WSA_SPK2 OUT", > "IN1_HPHL", "HPHL_OUT", > @@ -1691,3 +1690,7 @@ &usb_mp_qmpphy0 { > > status = "okay"; > }; > + > +&sound { > + model = "X1E80100-HP-OMNIBOOK-X14"; > +}; Usually the DT don't use this idea. Could you please bring the model back to the node? The label is fine. > -- > 2.43.0 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model 2025-04-25 19:44 ` Dmitry Baryshkov @ 2025-04-26 7:45 ` Juerg Haefliger 2025-04-26 8:08 ` Dmitry Baryshkov 0 siblings, 1 reply; 36+ messages in thread From: Juerg Haefliger @ 2025-04-26 7:45 UTC (permalink / raw) To: Dmitry Baryshkov Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh [-- Attachment #1: Type: text/plain, Size: 1643 bytes --] On Fri, 25 Apr 2025 22:44:42 +0300 Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> wrote: > On Wed, Apr 16, 2025 at 11:42:34AM +0200, Juerg Haefliger wrote: > > Add a label to the sound node and pull out the model name to make it > > explicit and easier to override it from other nodes. > > > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > > --- > > arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 +++++-- > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > > index cd860a246c45..9595ced8b2cc 100644 > > --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > > @@ -174,9 +174,8 @@ linux,cma { > > }; > > }; > > > > - sound { > > + sound: sound { > > compatible = "qcom,x1e80100-sndcard"; > > - model = "X1E80100-HP-OMNIBOOK-X14"; > > audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", > > "SpkrRight IN", "WSA WSA_SPK2 OUT", > > "IN1_HPHL", "HPHL_OUT", > > @@ -1691,3 +1690,7 @@ &usb_mp_qmpphy0 { > > > > status = "okay"; > > }; > > + > > +&sound { > > + model = "X1E80100-HP-OMNIBOOK-X14"; > > +}; > > Usually the DT don't use this idea. Could you please bring the model > back to the node? The label is fine. Hm. Maybe I misunderstood but isn't that what Krzysztof requested here? https://lore.kernel.org/linux-arm-msm/bb95af7c-5e88-4c6a-87db-2ddd1fe211a5@kernel.org/ ...Juerg > > > -- > > 2.43.0 > > > [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model 2025-04-26 7:45 ` Juerg Haefliger @ 2025-04-26 8:08 ` Dmitry Baryshkov 0 siblings, 0 replies; 36+ messages in thread From: Dmitry Baryshkov @ 2025-04-26 8:08 UTC (permalink / raw) To: Juerg Haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh On Sat, Apr 26, 2025 at 09:45:15AM +0200, Juerg Haefliger wrote: > On Fri, 25 Apr 2025 22:44:42 +0300 > Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> wrote: > > > On Wed, Apr 16, 2025 at 11:42:34AM +0200, Juerg Haefliger wrote: > > > Add a label to the sound node and pull out the model name to make it > > > explicit and easier to override it from other nodes. > > > > > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > > > --- > > > arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 +++++-- > > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > > > index cd860a246c45..9595ced8b2cc 100644 > > > --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts > > > @@ -174,9 +174,8 @@ linux,cma { > > > }; > > > }; > > > > > > - sound { > > > + sound: sound { > > > compatible = "qcom,x1e80100-sndcard"; > > > - model = "X1E80100-HP-OMNIBOOK-X14"; > > > audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", > > > "SpkrRight IN", "WSA WSA_SPK2 OUT", > > > "IN1_HPHL", "HPHL_OUT", > > > @@ -1691,3 +1690,7 @@ &usb_mp_qmpphy0 { > > > > > > status = "okay"; > > > }; > > > + > > > +&sound { > > > + model = "X1E80100-HP-OMNIBOOK-X14"; > > > +}; > > > > Usually the DT don't use this idea. Could you please bring the model > > back to the node? The label is fine. > > Hm. Maybe I misunderstood but isn't that what Krzysztof requested here? > https://lore.kernel.org/linux-arm-msm/bb95af7c-5e88-4c6a-87db-2ddd1fe211a5@kernel.org/ In the override, yes. So, in this file you should still have: / { sound: sound { model = "foo bar baz"; other-props; }; }; in the DT overlay (dtso): &sound { model = "other model"; }; Another, more common option: base.dtsi: / { sound: sound { other-props; }; }; one.dts: #include "base.dtsi" &sound { model = "foo bar baz"; }; two.dts: #include "base.dtsi" &sound { model = "other model"; }; > > ...Juerg > > > > > > > -- > > > 2.43.0 > > > > > > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q 2025-04-16 9:42 ` [PATCH v3 " Juerg Haefliger 2025-04-16 9:42 ` [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger @ 2025-04-16 9:42 ` Juerg Haefliger 2025-04-16 9:42 ` [PATCH v3 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger ` (2 subsequent siblings) 4 siblings, 0 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-16 9:42 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add a compatible for the HP EliteBook Ultra G1q 14 inch Notebook AI PC. The laptop is based on the Snapdragon X Elite (x1e80100) SoC. PDF link: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c08996392 Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 618a87693ac1..67900d455ea7 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1131,6 +1131,7 @@ properties: - enum: - asus,vivobook-s15 - dell,xps13-9345 + - hp,elitebook-ultra-g1q - hp,omnibook-x14 - lenovo,yoga-slim7x - microsoft,romulus13 -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-16 9:42 ` [PATCH v3 " Juerg Haefliger 2025-04-16 9:42 ` [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger 2025-04-16 9:42 ` [PATCH v3 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger @ 2025-04-16 9:42 ` Juerg Haefliger 2025-04-25 19:45 ` Dmitry Baryshkov 2025-04-16 12:43 ` [PATCH v3 0/3] HP EliteBook Ultra G1q support Rob Herring (Arm) 2025-04-29 14:49 ` [PATCH v4 0/4] " Juerg Haefliger 4 siblings, 1 reply; 36+ messages in thread From: Juerg Haefliger @ 2025-04-16 9:42 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It seems to be using the same baseboard as the HP OmniBook X 14 so just use that for now. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 30 +++++++++++++++++++ drivers/firmware/qcom/qcom_scm.c | 1 + 3 files changed, 32 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 140b0b2abfb5..732cc3f6a220 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -293,6 +293,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts new file mode 100644 index 000000000000..4ea00d823693 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "x1e80100-hp-omnibook-x14.dts" + +/ { + model = "HP EliteBook Ultra G1q"; + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn", + "qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn", + "qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf"; +}; + +&sound { + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; +}; diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index fc4d67e4c4a6..e7262ad11509 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -1987,6 +1987,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { { .compatible = "asus,vivobook-s15" }, { .compatible = "dell,xps13-9345" }, + { .compatible = "hp,elitebook-ultra-g1q" }, { .compatible = "hp,omnibook-x14" }, { .compatible = "huawei,gaokun3" }, { .compatible = "lenovo,flex-5g" }, -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH v3 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-16 9:42 ` [PATCH v3 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger @ 2025-04-25 19:45 ` Dmitry Baryshkov 0 siblings, 0 replies; 36+ messages in thread From: Dmitry Baryshkov @ 2025-04-25 19:45 UTC (permalink / raw) To: Juerg Haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh On Wed, Apr 16, 2025 at 11:42:36AM +0200, Juerg Haefliger wrote: > Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It > seems to be using the same baseboard as the HP OmniBook X 14 so just use > that for now. > > Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 30 +++++++++++++++++++ > drivers/firmware/qcom/qcom_scm.c | 1 + You can't merge DT and driver into a single patch. Please split it into two parts. > 3 files changed, 32 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 140b0b2abfb5..732cc3f6a220 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -293,6 +293,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > new file mode 100644 > index 000000000000..4ea00d823693 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > @@ -0,0 +1,30 @@ > +// SPDX-License-Identifier: BSD-3-Clause > + > +/dts-v1/; > + > +#include "x1e80100-hp-omnibook-x14.dts" > + > +/ { > + model = "HP EliteBook Ultra G1q"; > + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; > +}; > + > +&gpu { > + zap-shader { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; > + }; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn", > + "qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf"; > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn", > + "qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf"; > +}; > + > +&sound { > + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; > +}; > diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c > index fc4d67e4c4a6..e7262ad11509 100644 > --- a/drivers/firmware/qcom/qcom_scm.c > +++ b/drivers/firmware/qcom/qcom_scm.c > @@ -1987,6 +1987,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); > static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { > { .compatible = "asus,vivobook-s15" }, > { .compatible = "dell,xps13-9345" }, > + { .compatible = "hp,elitebook-ultra-g1q" }, > { .compatible = "hp,omnibook-x14" }, > { .compatible = "huawei,gaokun3" }, > { .compatible = "lenovo,flex-5g" }, > -- > 2.43.0 > -- With best wishes Dmitry ^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 0/3] HP EliteBook Ultra G1q support 2025-04-16 9:42 ` [PATCH v3 " Juerg Haefliger ` (2 preceding siblings ...) 2025-04-16 9:42 ` [PATCH v3 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger @ 2025-04-16 12:43 ` Rob Herring (Arm) 2025-04-29 14:49 ` [PATCH v4 0/4] " Juerg Haefliger 4 siblings, 0 replies; 36+ messages in thread From: Rob Herring (Arm) @ 2025-04-16 12:43 UTC (permalink / raw) To: Juerg Haefliger Cc: devicetree, krzk+dt, linux-kernel, andersson, conor+dt, linux-arm-msm, konradybcio On Wed, 16 Apr 2025 11:42:33 +0200, Juerg Haefliger wrote: > Add support for the HP EliteBook Ultra G1q 14" AI laptop. > > Based on HWINFO64 and APCI tables, it seems to be the same HW as the > HP OmniBook X 14. > > v2->v3: > - Drop status properties from nodes in patch 3/3 > - Add acked-by-krzk to patch 2/3 > v1->v2: > - Don't rename the X14 dts to dtsi and directly include the dts > - Add a label to the sound node and use that to override the model > - Reorder the dt doc patch before the dt usage > > > Juerg Haefliger (3): > arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull > out the model > dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q > arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook > Ultra G1q > > .../devicetree/bindings/arm/qcom.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 30 +++++++++++++++++++ > .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 7 +++-- > drivers/firmware/qcom/qcom_scm.c | 1 + > 5 files changed, 38 insertions(+), 2 deletions(-) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts > > -- > 2.43.0 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Base: attempting to guess base-commit... Base: tags/next-20250416 (best guess, 1/4 blobs matched) If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250416094236.312079-1-juerg.haefliger@canonical.com: arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dtb: pinctrl@f100000 (qcom,x1e80100-tlmm): Unevaluated properties are not allowed ('bt-en-sleep' was unexpected) from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v4 0/4] HP EliteBook Ultra G1q support 2025-04-16 9:42 ` [PATCH v3 " Juerg Haefliger ` (3 preceding siblings ...) 2025-04-16 12:43 ` [PATCH v3 0/3] HP EliteBook Ultra G1q support Rob Herring (Arm) @ 2025-04-29 14:49 ` Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 1/4] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label Juerg Haefliger ` (4 more replies) 4 siblings, 5 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-29 14:49 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add support for the HP EliteBook Ultra G1q 14" AI laptop. Based on HWINFO64 and APCI tables, it seems to be the same HW as the HP OmniBook X 14. v3->v4: - Bring the sound model back to the node - Split the driver change into a separate commit v2->v3: - Drop status properties from nodes in patch 3/3 - Add acked-by-krzk to patch 2/3 v1->v2: - Don't rename the X14 dts to dtsi and directly include the dts - Add a label to the sound node and use that to override the model - Reorder the dt doc patch before the dt usage Juerg Haefliger (4): arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 30 +++++++++++++++++++ .../dts/qcom/x1e80100-hp-omnibook-x14.dts | 2 +- drivers/firmware/qcom/qcom_scm.c | 1 + 5 files changed, 34 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts -- 2.43.0 ^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v4 1/4] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label 2025-04-29 14:49 ` [PATCH v4 0/4] " Juerg Haefliger @ 2025-04-29 14:49 ` Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 2/4] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger ` (3 subsequent siblings) 4 siblings, 0 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-29 14:49 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add a label to the sound node to make it easier to override from other nodes. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index cd860a246c45..628e28299c3d 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -174,7 +174,7 @@ linux,cma { }; }; - sound { + sound: sound { compatible = "qcom,x1e80100-sndcard"; model = "X1E80100-HP-OMNIBOOK-X14"; audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v4 2/4] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q 2025-04-29 14:49 ` [PATCH v4 0/4] " Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 1/4] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label Juerg Haefliger @ 2025-04-29 14:49 ` Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 3/4] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger ` (2 subsequent siblings) 4 siblings, 0 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-29 14:49 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Add a compatible for the HP EliteBook Ultra G1q 14 inch Notebook AI PC. The laptop is based on the Snapdragon X Elite (x1e80100) SoC. PDF link: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c08996392 Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 618a87693ac1..67900d455ea7 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1131,6 +1131,7 @@ properties: - enum: - asus,vivobook-s15 - dell,xps13-9345 + - hp,elitebook-ultra-g1q - hp,omnibook-x14 - lenovo,yoga-slim7x - microsoft,romulus13 -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v4 3/4] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q 2025-04-29 14:49 ` [PATCH v4 0/4] " Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 1/4] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 2/4] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger @ 2025-04-29 14:49 ` Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 4/4] firmware: qcom: scm: Allow QSEECOM " Juerg Haefliger 2025-05-14 21:03 ` (subset) [PATCH v4 0/4] HP EliteBook Ultra G1q support Bjorn Andersson 4 siblings, 0 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-29 14:49 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It seems to be using the same baseboard as the HP OmniBook X 14 so just use that for now. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/x1e80100-hp-elitebook-ultra-g1q.dts | 30 +++++++++++++++++++ 2 files changed, 31 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 140b0b2abfb5..732cc3f6a220 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -293,6 +293,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-elitebook-ultra-g1q.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts new file mode 100644 index 000000000000..4ea00d823693 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "x1e80100-hp-omnibook-x14.dts" + +/ { + model = "HP EliteBook Ultra G1q"; + compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn", + "qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn", + "qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf"; +}; + +&sound { + model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q"; +}; -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v4 4/4] firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q 2025-04-29 14:49 ` [PATCH v4 0/4] " Juerg Haefliger ` (2 preceding siblings ...) 2025-04-29 14:49 ` [PATCH v4 3/4] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger @ 2025-04-29 14:49 ` Juerg Haefliger 2025-05-14 21:03 ` (subset) [PATCH v4 0/4] HP EliteBook Ultra G1q support Bjorn Andersson 4 siblings, 0 replies; 36+ messages in thread From: Juerg Haefliger @ 2025-04-29 14:49 UTC (permalink / raw) To: juerg.haefliger Cc: andersson, conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh This is required to get access to efivars and uefi boot loader support. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> --- drivers/firmware/qcom/qcom_scm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index fc4d67e4c4a6..e7262ad11509 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -1987,6 +1987,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send); static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { { .compatible = "asus,vivobook-s15" }, { .compatible = "dell,xps13-9345" }, + { .compatible = "hp,elitebook-ultra-g1q" }, { .compatible = "hp,omnibook-x14" }, { .compatible = "huawei,gaokun3" }, { .compatible = "lenovo,flex-5g" }, -- 2.43.0 ^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: (subset) [PATCH v4 0/4] HP EliteBook Ultra G1q support 2025-04-29 14:49 ` [PATCH v4 0/4] " Juerg Haefliger ` (3 preceding siblings ...) 2025-04-29 14:49 ` [PATCH v4 4/4] firmware: qcom: scm: Allow QSEECOM " Juerg Haefliger @ 2025-05-14 21:03 ` Bjorn Andersson 4 siblings, 0 replies; 36+ messages in thread From: Bjorn Andersson @ 2025-05-14 21:03 UTC (permalink / raw) To: Juerg Haefliger Cc: conor+dt, devicetree, konradybcio, krzk+dt, linux-arm-msm, linux-kernel, robh On Tue, 29 Apr 2025 16:49:53 +0200, Juerg Haefliger wrote: > Add support for the HP EliteBook Ultra G1q 14" AI laptop. > > Based on HWINFO64 and APCI tables, it seems to be the same HW as the > HP OmniBook X 14. > > v3->v4: > - Bring the sound model back to the node > - Split the driver change into a separate commit > v2->v3: > - Drop status properties from nodes in patch 3/3 > - Add acked-by-krzk to patch 2/3 > v1->v2: > - Don't rename the X14 dts to dtsi and directly include the dts > - Add a label to the sound node and use that to override the model > - Reorder the dt doc patch before the dt usage > > [...] Applied, thanks! [4/4] firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q commit: eb47bca4cc8ab06bd25385c87406e0f27ebdbf07 Best regards, -- Bjorn Andersson <andersson@kernel.org> ^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2025-05-14 21:04 UTC | newest] Thread overview: 36+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-04-04 9:01 [PATCH 0/3] HP EliteBook Ultra G1q support Juerg Haefliger 2025-04-04 9:01 ` [PATCH 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Create and include a dtsi Juerg Haefliger 2025-04-04 12:51 ` Krzysztof Kozlowski 2025-04-07 9:20 ` Juerg Haefliger 2025-04-04 15:33 ` Rob Herring 2025-04-07 9:21 ` Juerg Haefliger 2025-04-04 9:01 ` [PATCH 2/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for HP EliteBook Ultra G1q Juerg Haefliger 2025-04-04 12:53 ` Krzysztof Kozlowski 2025-04-04 9:01 ` [PATCH 3/3] dt-bindings: arm: qcom: Document " Juerg Haefliger 2025-04-04 12:48 ` Krzysztof Kozlowski 2025-04-08 14:52 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Juerg Haefliger 2025-04-08 14:52 ` [PATCH v2 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger 2025-04-10 5:17 ` Maud Spierings 2025-04-10 5:37 ` Maud Spierings 2025-04-08 14:52 ` [PATCH v2 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger 2025-04-08 17:48 ` Rob Herring (Arm) 2025-04-08 14:52 ` [PATCH v2 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger 2025-04-10 5:34 ` Maud Spierings 2025-04-10 16:41 ` Konrad Dybcio 2025-04-11 11:05 ` Johan Hovold 2025-04-09 14:14 ` [PATCH v2 0/3] HP EliteBook Ultra G1q support Rob Herring (Arm) 2025-04-16 9:42 ` [PATCH v3 " Juerg Haefliger 2025-04-16 9:42 ` [PATCH v3 1/3] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label and pull out the model Juerg Haefliger 2025-04-25 19:44 ` Dmitry Baryshkov 2025-04-26 7:45 ` Juerg Haefliger 2025-04-26 8:08 ` Dmitry Baryshkov 2025-04-16 9:42 ` [PATCH v3 2/3] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger 2025-04-16 9:42 ` [PATCH v3 3/3] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger 2025-04-25 19:45 ` Dmitry Baryshkov 2025-04-16 12:43 ` [PATCH v3 0/3] HP EliteBook Ultra G1q support Rob Herring (Arm) 2025-04-29 14:49 ` [PATCH v4 0/4] " Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 1/4] arm64: dts: qcom: x1e80100-hp-omnibook-x14: add sound label Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 2/4] dt-bindings: arm: qcom: Document HP EliteBook Ultra G1q Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 3/4] arm64: dts: qcom: x1e80100-hp-elitebook-ultra-g1q: DT for " Juerg Haefliger 2025-04-29 14:49 ` [PATCH v4 4/4] firmware: qcom: scm: Allow QSEECOM " Juerg Haefliger 2025-05-14 21:03 ` (subset) [PATCH v4 0/4] HP EliteBook Ultra G1q support Bjorn Andersson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.