[PATCH v3 0/2] Fixes for SRA sensor handling

[PATCH v3 0/2] Fixes for SRA sensor handling

[Mario Limonciello]

From: Mario Limonciello <mario.limonciello@amd.com>

On systems with an SRA sensor there are some problems with both init
and failure paths.  This series accounts for both.

Mario Limonciello (2):
  HID: amd_sfh: Fix SRA sensor when it's the only sensor
  HID: amd_sfh: Avoid clearing reports for SRA sensor

 drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

-- 
2.43.0

[PATCH v3 1/2] HID: amd_sfh: Fix SRA sensor when it's the only sensor

[Mario Limonciello]

From: Mario Limonciello <mario.limonciello@amd.com>

On systems that only have an SRA sensor connected to SFH the sensor
doesn't get enabled due to a bad optimization condition of breaking
the sensor walk loop.

This optimization is unnecessary in the first place because if there
is only one device then the loop only runs once. Drop the condition
and explicitly mark sensor as enabled.

Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Fixes: d1c444b47100d ("HID: amd_sfh: Add support to export device operating states")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v2:
 * Add tag
---
 drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
index 25f0ebfcbd5f5..c1bdf1e0d44af 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
@@ -134,9 +134,6 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
 	for (i = 0; i < cl_data->num_hid_devices; i++) {
 		cl_data->sensor_sts[i] = SENSOR_DISABLED;
 
-		if (cl_data->num_hid_devices == 1 && cl_data->sensor_idx[0] == SRA_IDX)
-			break;
-
 		if (cl_data->sensor_idx[i] == SRA_IDX) {
 			info.sensor_idx = cl_data->sensor_idx[i];
 			writel(0, privdata->mmio + amd_get_p2c_val(privdata, 0));
@@ -145,8 +142,10 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
 				(privdata, cl_data->sensor_idx[i], ENABLE_SENSOR);
 
 			cl_data->sensor_sts[i] = (status == 0) ? SENSOR_ENABLED : SENSOR_DISABLED;
-			if (cl_data->sensor_sts[i] == SENSOR_ENABLED)
+			if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
+				cl_data->is_any_sensor_enabled = true;
 				privdata->dev_en.is_sra_present = true;
+			}
 			continue;
 		}
 
-- 
2.43.0

[PATCH v3 2/2] HID: amd_sfh: Avoid clearing reports for SRA sensor

[Mario Limonciello]

From: Mario Limonciello <mario.limonciello@amd.com>

SRA sensor doesn't allocate any memory for reports.  Skip
trying to clear memory for that sensor in cleanup path.

Suggested-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v3:
 * Less changes as amd_sfh_hid_client_deinit() covers a lot
v2:
 * New patch
---
 drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
index c1bdf1e0d44af..803b0894a0bd0 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
@@ -237,6 +237,8 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
 cleanup:
 	amd_sfh_hid_client_deinit(privdata);
 	for (i = 0; i < cl_data->num_hid_devices; i++) {
+		if (cl_data->sensor_idx[i] == SRA_IDX)
+			continue;
 		devm_kfree(dev, cl_data->feature_report[i]);
 		devm_kfree(dev, in_data->input_report[i]);
 		devm_kfree(dev, cl_data->report_descr[i]);
-- 
2.43.0