[PATCH v3 2/3] rtc: pcf85063: create pcf85063_i2c_probe

[Antoni Pokusinski <apokusinski01@gmail.com>]

Move the i2c-specific code from pcf85063_probe to the newly created
function.

This is a preparation for introducing the support for RV8063 real-time
clock with SPI interface.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/rtc-pcf85063.c | 97 +++++++++++++++++++++++++++-----------
 1 file changed, 70 insertions(+), 27 deletions(-)

diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 4fa5c4ecdd5a..03dfc58f4cd7 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -559,12 +559,12 @@ static const struct pcf85063_config config_rv8263 = {
 	.force_cap_7000 = 1,
 };
 
-static int pcf85063_probe(struct i2c_client *client)
+static int pcf85063_probe(struct device *dev, struct regmap *regmap, int irq,
+			  const struct pcf85063_config *config)
 {
 	struct pcf85063 *pcf85063;
 	unsigned int tmp;
 	int err;
-	const struct pcf85063_config *config;
 	struct nvmem_config nvmem_cfg = {
 		.name = "pcf85063_nvram",
 		.reg_read = pcf85063_nvmem_read,
@@ -573,28 +573,22 @@ static int pcf85063_probe(struct i2c_client *client)
 		.size = 1,
 	};
 
-	dev_dbg(&client->dev, "%s\n", __func__);
+	dev_dbg(dev, "%s\n", __func__);
 
-	pcf85063 = devm_kzalloc(&client->dev, sizeof(struct pcf85063),
+	pcf85063 = devm_kzalloc(dev, sizeof(struct pcf85063),
 				GFP_KERNEL);
 	if (!pcf85063)
 		return -ENOMEM;
 
-	config = i2c_get_match_data(client);
-	if (!config)
-		return -ENODEV;
-
-	pcf85063->regmap = devm_regmap_init_i2c(client, &config->regmap);
-	if (IS_ERR(pcf85063->regmap))
-		return PTR_ERR(pcf85063->regmap);
+	pcf85063->regmap = regmap;
 
-	i2c_set_clientdata(client, pcf85063);
+	dev_set_drvdata(dev, pcf85063);
 
 	err = regmap_read(pcf85063->regmap, PCF85063_REG_SC, &tmp);
 	if (err)
-		return dev_err_probe(&client->dev, err, "RTC chip is not present\n");
+		return dev_err_probe(dev, err, "RTC chip is not present\n");
 
-	pcf85063->rtc = devm_rtc_allocate_device(&client->dev);
+	pcf85063->rtc = devm_rtc_allocate_device(dev);
 	if (IS_ERR(pcf85063->rtc))
 		return PTR_ERR(pcf85063->rtc);
 
@@ -605,19 +599,17 @@ static int pcf85063_probe(struct i2c_client *client)
 	 * of the registers after the automatic power-on reset...
 	 */
 	if (tmp & PCF85063_REG_SC_OS) {
-		dev_warn(&client->dev,
-			 "POR issue detected, sending a SW reset\n");
+		dev_warn(dev, "POR issue detected, sending a SW reset\n");
 		err = regmap_write(pcf85063->regmap, PCF85063_REG_CTRL1,
 				   PCF85063_REG_CTRL1_SWR);
 		if (err < 0)
-			dev_warn(&client->dev,
-				 "SW reset failed, trying to continue\n");
+			dev_warn(dev, "SW reset failed, trying to continue\n");
 	}
 
-	err = pcf85063_load_capacitance(pcf85063, client->dev.of_node,
+	err = pcf85063_load_capacitance(pcf85063, dev->of_node,
 					config->force_cap_7000 ? 7000 : 0);
 	if (err < 0)
-		dev_warn(&client->dev, "failed to set xtal load capacitance: %d",
+		dev_warn(dev, "failed to set xtal load capacitance: %d",
 			 err);
 
 	pcf85063->rtc->ops = &pcf85063_rtc_ops;
@@ -627,13 +619,13 @@ static int pcf85063_probe(struct i2c_client *client)
 	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, pcf85063->rtc->features);
 	clear_bit(RTC_FEATURE_ALARM, pcf85063->rtc->features);
 
-	if (config->has_alarms && client->irq > 0) {
+	if (config->has_alarms && irq > 0) {
 		unsigned long irqflags = IRQF_TRIGGER_LOW;
 
-		if (dev_fwnode(&client->dev))
+		if (dev_fwnode(dev))
 			irqflags = 0;
 
-		err = devm_request_threaded_irq(&client->dev, client->irq,
+		err = devm_request_threaded_irq(dev, irq,
 						NULL, pcf85063_rtc_handle_irq,
 						irqflags | IRQF_ONESHOT,
 						"pcf85063", pcf85063);
@@ -642,8 +634,8 @@ static int pcf85063_probe(struct i2c_client *client)
 				 "unable to request IRQ, alarms disabled\n");
 		} else {
 			set_bit(RTC_FEATURE_ALARM, pcf85063->rtc->features);
-			device_init_wakeup(&client->dev, true);
-			err = dev_pm_set_wake_irq(&client->dev, client->irq);
+			device_init_wakeup(dev, true);
+			err = dev_pm_set_wake_irq(dev, irq);
 			if (err)
 				dev_err(&pcf85063->rtc->dev,
 					"failed to enable irq wake\n");
@@ -661,6 +653,8 @@ static int pcf85063_probe(struct i2c_client *client)
 	return devm_rtc_register_device(pcf85063->rtc);
 }
 
+#if IS_ENABLED(CONFIG_I2C)
+
 static const struct i2c_device_id pcf85063_ids[] = {
 	{ "pca85073a", .driver_data = (kernel_ulong_t)&config_pcf85063a },
 	{ "pcf85063", .driver_data = (kernel_ulong_t)&config_pcf85063 },
@@ -683,16 +677,65 @@ static const struct of_device_id pcf85063_of_match[] = {
 MODULE_DEVICE_TABLE(of, pcf85063_of_match);
 #endif
 
+static int pcf85063_i2c_probe(struct i2c_client *client)
+{
+	const struct pcf85063_config *config;
+	struct regmap *regmap;
+
+	config = i2c_get_match_data(client);
+	if (!config)
+		return -ENODEV;
+
+	regmap = devm_regmap_init_i2c(client, &config->regmap);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return pcf85063_probe(&client->dev, regmap, client->irq, config);
+}
+
 static struct i2c_driver pcf85063_driver = {
 	.driver		= {
 		.name	= "rtc-pcf85063",
 		.of_match_table = of_match_ptr(pcf85063_of_match),
 	},
-	.probe		= pcf85063_probe,
+	.probe		= pcf85063_i2c_probe,
 	.id_table	= pcf85063_ids,
 };
 
-module_i2c_driver(pcf85063_driver);
+static int pcf85063_register_driver(void)
+{
+	return i2c_add_driver(&pcf85063_driver);
+}
+
+static void pcf85063_unregister_driver(void)
+{
+	i2c_del_driver(&pcf85063_driver);
+}
+
+#else
+
+static int pcf85063_register_driver(void)
+{
+	return 0;
+}
+
+static void pcf85063_unregister_driver(void)
+{
+}
+
+#endif /* IS_ENABLED(CONFIG_I2C) */
+
+static int __init pcf85063_init(void)
+{
+	return pcf85063_register_driver();
+}
+module_init(pcf85063_init);
+
+static void __exit pcf85063_exit(void)
+{
+	pcf85063_unregister_driver();
+}
+module_exit(pcf85063_exit);
 
 MODULE_AUTHOR("Søren Andersen <san@rosetechnology.dk>");
 MODULE_DESCRIPTION("PCF85063 RTC driver");
-- 
2.25.1