All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antoni Pokusinski <apokusinski01@gmail.com>
To: alexandre.belloni@bootlin.com, krzk+dt@kernel.org,
	conor+dt@kernel.org, robh@kernel.org,
	alexander.stein@ew.tq-group.com
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	Antoni Pokusinski <apokusinski01@gmail.com>
Subject: [PATCH v3 3/3] rtc: pcf85063: add support for RV8063
Date: Thu, 10 Apr 2025 22:23:17 +0200	[thread overview]
Message-ID: <20250410202317.25873-4-apokusinski01@gmail.com> (raw)
In-Reply-To: <20250410202317.25873-1-apokusinski01@gmail.com>

Microcrystal RV8063 is a real-time clock with SPI interface. Its
functionality is very similar to the RV8263 rtc.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/Kconfig        | 21 +++++-----
 drivers/rtc/rtc-pcf85063.c | 80 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 91 insertions(+), 10 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 838bdc138ffe..1b9be96faa13 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -483,15 +483,6 @@ config RTC_DRV_PCF8523
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-pcf8523.
 
-config RTC_DRV_PCF85063
-	tristate "NXP PCF85063"
-	select REGMAP_I2C
-	help
-	  If you say yes here you get support for the PCF85063 RTC chip
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-pcf85063.
-
 config RTC_DRV_PCF85363
 	tristate "NXP PCF85363"
 	select REGMAP_I2C
@@ -971,6 +962,18 @@ config RTC_DRV_PCF2127
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-pcf2127.
 
+config RTC_DRV_PCF85063
+	tristate "NXP PCF85063"
+	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
+	help
+	  If you say yes here you get support for the PCF85063 and RV8063
+	  RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf85063.
+
 config RTC_DRV_RV3029C2
 	tristate "Micro Crystal RV3029/3049"
 	depends on RTC_I2C_AND_SPI
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 03dfc58f4cd7..bcfefe823044 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
+#include <linux/spi/spi.h>
 
 /*
  * Information for this driver was pulled from the following datasheets.
@@ -29,6 +30,9 @@
  *
  *  https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-8263-C7_App-Manual.pdf
  *  RV8263 -- Rev. 1.0 — January 2019
+ *
+ *  https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-8063-C7_App-Manual.pdf
+ *  RV8063 -- Rev. 1.1 - October 2018
  */
 
 #define PCF85063_REG_CTRL1		0x00 /* status */
@@ -559,6 +563,18 @@ static const struct pcf85063_config config_rv8263 = {
 	.force_cap_7000 = 1,
 };
 
+static const struct pcf85063_config config_rv8063 = {
+	.regmap = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = 0x11,
+		.read_flag_mask = BIT(7) | BIT(5),
+		.write_flag_mask = BIT(5),
+	},
+	.has_alarms = 1,
+	.force_cap_7000 = 1,
+};
+
 static int pcf85063_probe(struct device *dev, struct regmap *regmap, int irq,
 			  const struct pcf85063_config *config)
 {
@@ -725,14 +741,76 @@ static void pcf85063_unregister_driver(void)
 
 #endif /* IS_ENABLED(CONFIG_I2C) */
 
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static const struct spi_device_id rv8063_id[] = {
+	{ "rv8063" },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, rv8063_id);
+
+static int rv8063_probe(struct spi_device *spi)
+{
+	const struct pcf85063_config *config = &config_rv8063;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &config->regmap);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return pcf85063_probe(&spi->dev, regmap, spi->irq, config);
+}
+
+static struct spi_driver rv8063_driver = {
+	.driver         = {
+		.name   = "rv8063",
+	},
+	.probe          = rv8063_probe,
+	.id_table	= rv8063_id,
+};
+
+static int __init rv8063_register_driver(void)
+{
+	return spi_register_driver(&rv8063_driver);
+}
+
+static void __exit rv8063_unregister_driver(void)
+{
+	spi_unregister_driver(&rv8063_driver);
+}
+
+#else
+
+static int __init rv8063_register_driver(void)
+{
+	return 0;
+}
+
+static void __exit rv8063_unregister_driver(void)
+{
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_MASTER) */
+
 static int __init pcf85063_init(void)
 {
-	return pcf85063_register_driver();
+	int ret;
+
+	ret = pcf85063_register_driver();
+	if (ret)
+		return ret;
+
+	ret = rv8063_register_driver();
+	if (ret)
+		pcf85063_unregister_driver();
+
+	return ret;
 }
 module_init(pcf85063_init);
 
 static void __exit pcf85063_exit(void)
 {
+	rv8063_unregister_driver();
 	pcf85063_unregister_driver();
 }
 module_exit(pcf85063_exit);
-- 
2.25.1


  parent reply	other threads:[~2025-04-10 20:23 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-10 20:23 [PATCH v3 0/3] add support for RV8063 SPI rtc Antoni Pokusinski
2025-04-10 20:23 ` [PATCH v3 1/3] dt-bindings: rtc: pcf85063: add binding for RV8063 Antoni Pokusinski
2025-04-11 19:27   ` Rob Herring
2025-04-10 20:23 ` [PATCH v3 2/3] rtc: pcf85063: create pcf85063_i2c_probe Antoni Pokusinski
2025-04-10 20:23 ` Antoni Pokusinski [this message]
2025-04-11 19:24   ` [PATCH v3 3/3] rtc: pcf85063: add support for RV8063 Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250410202317.25873-4-apokusinski01@gmail.com \
    --to=apokusinski01@gmail.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.