From: Vadim Pasternak <vadimp@nvidia.com>
To: <hdegoede@redhat.com>, <ilpo.jarvinen@linux.intel.com>
Cc: <michaelsh@nvidia.com>, <crajank@nvidia.com>,
<fradensky@nvidia.com>, <oleksandrs@nvidia.com>,
<platform-driver-x86@vger.kernel.org>,
"Vadim Pasternak" <vadimp@nvidia.com>
Subject: [PATCH platform-next v8 5/7] platform: mellanox: mlx-platform: Add support for new Nvidia system
Date: Sat, 12 Apr 2025 12:18:41 +0300 [thread overview]
Message-ID: <20250412091843.33943-6-vadimp@nvidia.com> (raw)
In-Reply-To: <20250412091843.33943-1-vadimp@nvidia.com>
Add support for SN5640 and SN5610 Nvidia switch.
SN5640 is a 51.2Tbps switch based on Nvidia SPC-5 ASIC.
It provides up-to 400Gbps full bidirectional bandwidth per port.
The system supports 64 OSFP cages and fits into standard 2U racks.
SN5640 Features:
- 64 OSFP ports supporting 2.5Gbps - 400Gbps speeds.
- Air-cooled with 4 + 1 redundant fan units.
- 2 + 2 redundant 2000W PSUs.
- System management board based on AMD CPU with secure-boot support.
SN5610 is a 51.2Tbps switch based on Nvidia SPC-4 ASIC.
It provides up-to 800Gbps full bidirectional bandwidth per port.
The system supports 64 OSFP cages and fits into standard 2U racks.
SN5610 Features:
- 64 OSFP ports supporting 10Gbps - 800Gbps speeds.
- Air-cooled with 4 + 1 redundant fan units.
- 2 + 2 redundant 2000W PSUs.
- System management board based on AMD CPU with secure-boot support.
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
---
v6->v7
Changes added bt Vadim:
- Remove 'capability_mask' field.
v5->v6
Comments pointed out by Ilpo:
- Change 'int' to 'unsigned int' in mlxplat_dmi_ng400_hi171_matched().
v2->v3
Comments pointed out by Ilpo:
- Add empty lines for visibility in mlxplat_dmi_ng400_hi171_matched().
---
drivers/platform/mellanox/mlx-platform.c | 96 ++++++++++++++++++++++++
1 file changed, 96 insertions(+)
diff --git a/drivers/platform/mellanox/mlx-platform.c b/drivers/platform/mellanox/mlx-platform.c
index 4c7ff22117a6..9b8b430070b6 100644
--- a/drivers/platform/mellanox/mlx-platform.c
+++ b/drivers/platform/mellanox/mlx-platform.c
@@ -3000,6 +3000,59 @@ struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_l1_switch_data = {
.mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW | MLXPLAT_CPLD_LOW_AGGR_MASK_PWR_BUT,
};
+/* Platform hotplug for next-generation 800G systems family data */
+static struct mlxreg_core_item mlxplat_mlxcpld_ng800_hi171_items[] = {
+ {
+ .data = mlxplat_mlxcpld_ext_psu_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+ .mask = MLXPLAT_CPLD_PSU_EXT_MASK,
+ .capability = MLXPLAT_CPLD_LPC_REG_PSU_I2C_CAP_OFFSET,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_ext_psu_items_data),
+ .inversed = 1,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_modular_pwr_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+ .mask = MLXPLAT_CPLD_PWR_EXT_MASK,
+ .capability = MLXPLAT_CPLD_LPC_REG_PSU_I2C_CAP_OFFSET,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_ext_pwr_items_data),
+ .inversed = 0,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_xdr_fan_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
+ .mask = MLXPLAT_CPLD_FAN_XDR_MASK,
+ .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_xdr_fan_items_data),
+ .inversed = 1,
+ .health = false,
+ },
+ {
+ .data = mlxplat_mlxcpld_default_asic_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET,
+ .mask = MLXPLAT_CPLD_ASIC_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic_items_data),
+ .inversed = 0,
+ .health = true,
+ },
+};
+
+static
+struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_ng800_hi171_data = {
+ .items = mlxplat_mlxcpld_ng800_hi171_items,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_ng800_hi171_items),
+ .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET,
+ .mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF | MLXPLAT_CPLD_AGGR_MASK_COMEX,
+ .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET,
+ .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW | MLXPLAT_CPLD_LOW_AGGR_MASK_ASIC2,
+};
+
/* Platform led default data */
static struct mlxreg_core_data mlxplat_mlxcpld_default_led_data[] = {
{
@@ -4486,6 +4539,12 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
.mask = GENMASK(7, 0) & ~BIT(4),
.mode = 0644,
},
+ {
+ .label = "shutdown_unlock",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(5),
+ .mode = 0644,
+ },
{
.label = "erot1_ap_reset",
.reg = MLXPLAT_CPLD_LPC_REG_GP4_RO_OFFSET,
@@ -7312,6 +7371,29 @@ static int __init mlxplat_dmi_smart_switch_matched(const struct dmi_system_id *d
return mlxplat_register_platform_device();
}
+static int __init mlxplat_dmi_ng400_hi171_matched(const struct dmi_system_id *dmi)
+{
+ unsigned int i;
+
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_ng800_mux_data);
+ mlxplat_mux_data = mlxplat_ng800_mux_data;
+ mlxplat_hotplug = &mlxplat_mlxcpld_ng800_hi171_data;
+ mlxplat_hotplug->deferred_nr =
+ mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ mlxplat_led = &mlxplat_default_ng_led_data;
+ mlxplat_regs_io = &mlxplat_default_ng_regs_io_data;
+ mlxplat_fan = &mlxplat_xdr_fan_data;
+
+ for (i = 0; i < ARRAY_SIZE(mlxplat_mlxcpld_wd_set_type3); i++)
+ mlxplat_wd_data[i] = &mlxplat_mlxcpld_wd_set_type3[i];
+
+ mlxplat_i2c = &mlxplat_mlxcpld_i2c_ng_data;
+ mlxplat_regmap_config = &mlxplat_mlxcpld_regmap_config_ng400;
+
+ return mlxplat_register_platform_device();
+}
+
static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
{
.callback = mlxplat_dmi_default_wc_matched,
@@ -7412,6 +7494,20 @@ static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
DMI_MATCH(DMI_BOARD_NAME, "VMOD0019"),
},
},
+ {
+ .callback = mlxplat_dmi_ng400_hi171_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0022"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "HI171"),
+ },
+ },
+ {
+ .callback = mlxplat_dmi_ng400_hi171_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0022"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "HI172"),
+ },
+ },
{
.callback = mlxplat_dmi_msn274x_matched,
.matches = {
--
2.44.0
next prev parent reply other threads:[~2025-04-12 9:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-12 9:18 [PATCH platform-next v8 0/7] Add support for new systems, amendments Vadim Pasternak
2025-04-12 9:18 ` [PATCH platform-next v8 1/7] platform/mellanox: Rename field to improve code readability Vadim Pasternak
2025-04-12 9:18 ` [PATCH platform-next v8 2/7] platform/mellanox: mlxreg-dpu: Add initial support for Nvidia DPU Vadim Pasternak
2025-04-15 14:32 ` Ilpo Järvinen
2025-04-12 9:18 ` [PATCH platform-next v8 3/7] platform: mellanox: Introduce support of Nvidia smart switch Vadim Pasternak
2025-04-15 14:38 ` Ilpo Järvinen
2025-04-12 9:18 ` [PATCH platform-next v8 4/7] platform: mellanox: Cosmetic changes to improve code style Vadim Pasternak
2025-04-15 14:40 ` Ilpo Järvinen
2025-04-12 9:18 ` Vadim Pasternak [this message]
2025-04-15 14:48 ` [PATCH platform-next v8 5/7] platform: mellanox: mlx-platform: Add support for new Nvidia system Ilpo Järvinen
2025-04-12 9:18 ` [PATCH platform-next v8 6/7] platform: mellanox: nvsw-sn2200: Add support for new system flavour Vadim Pasternak
2025-04-15 15:00 ` Ilpo Järvinen
2025-04-12 9:18 ` [PATCH platform-next v8 7/7] Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces Vadim Pasternak
2025-04-15 15:02 ` Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250412091843.33943-6-vadimp@nvidia.com \
--to=vadimp@nvidia.com \
--cc=crajank@nvidia.com \
--cc=fradensky@nvidia.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=michaelsh@nvidia.com \
--cc=oleksandrs@nvidia.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.