From: Niklas Cassel <cassel@kernel.org>
To: Damien Le Moal <dlemoal@kernel.org>
Cc: linux-ide@vger.kernel.org, Igor Pylypiv <ipylypiv@google.com>,
Hannes Reinecke <hare@suse.de>, Niklas Cassel <cassel@kernel.org>
Subject: [PATCH v2 1/3] ata: libata-sata: Save all fields from sense data descriptor
Date: Tue, 15 Apr 2025 09:30:15 +0200 [thread overview]
Message-ID: <20250415073013.414987-6-cassel@kernel.org> (raw)
In-Reply-To: <20250415073013.414987-5-cassel@kernel.org>
When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
However, the SDB FIS only has fields STATUS and ERROR.
For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.
Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.
This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
drivers/ata/libata-sata.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index ba300cc0a3a3..2e4463d3a356 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1510,6 +1510,8 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
unsigned int err_mask, tag;
u8 *sense, sk = 0, asc = 0, ascq = 0;
u64 sense_valid, val;
+ u16 extended_sense;
+ bool aux_icc_valid;
int ret = 0;
err_mask = ata_read_log_page(dev, ATA_LOG_SENSE_NCQ, 0, buf, 2);
@@ -1529,6 +1531,8 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
sense_valid = (u64)buf[8] | ((u64)buf[9] << 8) |
((u64)buf[10] << 16) | ((u64)buf[11] << 24);
+ extended_sense = get_unaligned_le16(&buf[14]);
+ aux_icc_valid = extended_sense & BIT(15);
ata_qc_for_each_raw(ap, qc, tag) {
if (!(qc->flags & ATA_QCFLAG_EH) ||
@@ -1556,6 +1560,17 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
continue;
}
+ qc->result_tf.nsect = sense[6];
+ qc->result_tf.hob_nsect = sense[7];
+ qc->result_tf.lbal = sense[8];
+ qc->result_tf.lbam = sense[9];
+ qc->result_tf.lbah = sense[10];
+ qc->result_tf.hob_lbal = sense[11];
+ qc->result_tf.hob_lbam = sense[12];
+ qc->result_tf.hob_lbah = sense[13];
+ if (aux_icc_valid)
+ qc->result_tf.auxiliary = get_unaligned_le32(&sense[16]);
+
/* Set sense without also setting scsicmd->result */
scsi_build_sense_buffer(dev->flags & ATA_DFLAG_D_SENSE,
qc->scsicmd->sense_buffer, sk,
--
2.49.0
next prev parent reply other threads:[~2025-04-15 7:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-15 7:30 [PATCH v2 0/3] Successful NCQ commands sense_valid cleanups/fixes Niklas Cassel
2025-04-15 7:30 ` Niklas Cassel [this message]
2025-04-16 8:35 ` [PATCH v2 1/3] ata: libata-sata: Save all fields from sense data descriptor Damien Le Moal
2025-04-15 7:30 ` [PATCH v2 2/3] ata: libata-sata: Simplify sense_valid fetching Niklas Cassel
2025-04-15 18:03 ` Igor Pylypiv
2025-04-15 7:30 ` [PATCH v2 3/3] ata: libata-sata: Use BIT() macro Niklas Cassel
2025-04-15 7:47 ` Hannes Reinecke
2025-04-15 18:05 ` Igor Pylypiv
2025-04-16 8:32 ` Damien Le Moal
2025-04-16 9:19 ` Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250415073013.414987-6-cassel@kernel.org \
--to=cassel@kernel.org \
--cc=dlemoal@kernel.org \
--cc=hare@suse.de \
--cc=ipylypiv@google.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.