From: Nicholas Piggin <npiggin@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Nicholas Piggin" <npiggin@gmail.com>,
"Akihiko Odaki" <akihiko.odaki@daynix.com>,
"Fabiano Rosas" <farosas@suse.de>,
"Harsh Prateek Bora" <harshpb@linux.ibm.com>,
"John Snow" <jsnow@redhat.com>,
"Laurent Vivier" <lvivier@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
qemu-block@nongnu.org, qemu-ppc@nongnu.org
Subject: [PATCH v5 05/11] tests/qtest/ahci: unmap pci bar before reusing device
Date: Fri, 2 May 2025 13:04:39 +1000 [thread overview]
Message-ID: <20250502030446.88310-6-npiggin@gmail.com> (raw)
In-Reply-To: <20250502030446.88310-1-npiggin@gmail.com>
ahci-test double-maps the hba bar in the pending_callback test.
Unmap it first, to keep iomaps balanced.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
tests/qtest/libqos/ahci.h | 2 ++
tests/qtest/ahci-test.c | 4 ++++
tests/qtest/libqos/ahci.c | 11 +++++++++++
3 files changed, 17 insertions(+)
diff --git a/tests/qtest/libqos/ahci.h b/tests/qtest/libqos/ahci.h
index a0487a1557d..f610bd32a5f 100644
--- a/tests/qtest/libqos/ahci.h
+++ b/tests/qtest/libqos/ahci.h
@@ -574,7 +574,9 @@ void ahci_clean_mem(AHCIQState *ahci);
QPCIDevice *get_ahci_device(QTestState *qts, uint32_t *fingerprint);
void free_ahci_device(QPCIDevice *dev);
void ahci_pci_enable(AHCIQState *ahci);
+void ahci_pci_disable(AHCIQState *ahci);
void start_ahci_device(AHCIQState *ahci);
+void stop_ahci_device(AHCIQState *ahci);
void ahci_hba_enable(AHCIQState *ahci);
/* Port Management */
diff --git a/tests/qtest/ahci-test.c b/tests/qtest/ahci-test.c
index e8aabfc13f5..36caa7b2999 100644
--- a/tests/qtest/ahci-test.c
+++ b/tests/qtest/ahci-test.c
@@ -198,6 +198,7 @@ static void ahci_shutdown(AHCIQState *ahci)
{
QOSState *qs = ahci->parent;
+ ahci_pci_disable(ahci);
ahci_clean_mem(ahci);
free_ahci_device(ahci->dev);
g_free(ahci);
@@ -1418,6 +1419,7 @@ static void test_reset(void)
CMD_READ_DMA_EXT,
CMD_WRITE_DMA_EXT);
ahci_set(ahci, AHCI_GHC, AHCI_GHC_HR);
+ stop_ahci_device(ahci);
ahci_clean_mem(ahci);
}
@@ -1484,6 +1486,7 @@ static void test_reset_pending_callback(void)
sleep(1);
/* Start again. */
+ stop_ahci_device(ahci);
ahci_clean_mem(ahci);
ahci_pci_enable(ahci);
ahci_hba_enable(ahci);
@@ -1502,6 +1505,7 @@ static void test_reset_pending_callback(void)
ahci_free(ahci, ptr1);
ahci_free(ahci, ptr2);
+ stop_ahci_device(ahci);
ahci_clean_mem(ahci);
ahci_shutdown(ahci);
diff --git a/tests/qtest/libqos/ahci.c b/tests/qtest/libqos/ahci.c
index 34a75b7f43b..bd1994a9208 100644
--- a/tests/qtest/libqos/ahci.c
+++ b/tests/qtest/libqos/ahci.c
@@ -205,6 +205,11 @@ void ahci_pci_enable(AHCIQState *ahci)
}
+void ahci_pci_disable(AHCIQState *ahci)
+{
+ stop_ahci_device(ahci);
+}
+
/**
* Map BAR5/ABAR, and engage the PCI device.
*/
@@ -217,6 +222,12 @@ void start_ahci_device(AHCIQState *ahci)
qpci_device_enable(ahci->dev);
}
+void stop_ahci_device(AHCIQState *ahci)
+{
+ /* Unmap AHCI's ABAR */
+ qpci_iounmap(ahci->dev, ahci->hba_bar);
+}
+
/**
* Test and initialize the AHCI's HBA memory areas.
* Initialize and start any ports with devices attached.
--
2.47.1
next prev parent reply other threads:[~2025-05-02 3:08 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-02 3:04 [PATCH v5 00/11] tests/qtest: pci and msix fixes Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 01/11] tests/qtest: Enforce zero for the "un-fired" msix message value Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 02/11] tests/qtest: Fix virtio msix message endianness Nicholas Piggin
2025-05-05 5:05 ` Akihiko Odaki
2025-05-05 6:53 ` Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 03/11] tests/qtest: Add libqos function for testing msix interrupt status Nicholas Piggin
2025-05-05 5:37 ` Akihiko Odaki
2025-05-05 7:09 ` Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 04/11] tests/qtest: Enable spapr dma with linear iommu map Nicholas Piggin
2026-06-11 10:56 ` Alexander Mikhalitsyn
2025-05-02 3:04 ` Nicholas Piggin [this message]
2025-05-05 5:03 ` [PATCH v5 05/11] tests/qtest/ahci: unmap pci bar before reusing device Akihiko Odaki
2025-05-02 3:04 ` [PATCH v5 06/11] tests/qtest/ahci: don't unmap pci bar if it wasn't mapped Nicholas Piggin
2025-05-05 5:25 ` Akihiko Odaki
2025-05-05 6:54 ` Nicholas Piggin
2025-05-05 7:33 ` Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 07/11] tests/qtest/libquos/virtio: unmap pci bar when disabling device Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 08/11] tests/qtest/libquos/pci: Add migration fixup helper for pci devices Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 09/11] qtest/libqos/pci: Enforce balanced iomap/unmap Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 10/11] qtest/libqos/pci: Fix qpci_msix_enable sharing bar0 Nicholas Piggin
2025-05-02 3:04 ` [PATCH v5 11/11] qtest/libqos/pci: Factor msix entry helpers into pci common code Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250502030446.88310-6-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=akihiko.odaki@daynix.com \
--cc=farosas@suse.de \
--cc=harshpb@linux.ibm.com \
--cc=jsnow@redhat.com \
--cc=lvivier@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.