[PATCH] dt-bindings: interrupt-controller: Convert arm,nvic to DT schema

[PATCH] dt-bindings: interrupt-controller: Convert arm,nvic to DT schema

[Rob Herring (Arm)]

Convert the Arm NVIC interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../interrupt-controller/arm,nvic.txt         | 36 -----------
 .../interrupt-controller/arm,nvic.yaml        | 61 +++++++++++++++++++
 2 files changed, 61 insertions(+), 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
deleted file mode 100644
index 386ab37a383f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* ARM Nested Vector Interrupt Controller (NVIC)
-
-The NVIC provides an interrupt controller that is tightly coupled to
-Cortex-M based processor cores.  The NVIC implemented on different SoCs
-vary in the number of interrupts and priority bits per interrupt.
-
-Main node required properties:
-
-- compatible : should be one of:
-	"arm,v6m-nvic"
-	"arm,v7m-nvic"
-	"arm,v8m-nvic"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source.  The type shall be a <u32> and the value shall be 2.
-
-  The 1st cell contains the interrupt number for the interrupt type.
-
-  The 2nd cell is the priority of the interrupt.
-
-- reg : Specifies base physical address(s) and size of the NVIC registers.
-  This is at a fixed address (0xe000e100) and size (0xc00).
-
-- arm,num-irq-priority-bits: The number of priority bits implemented by the
-  given SoC
-
-Example:
-
-	intc: interrupt-controller@e000e100 {
-		compatible = "arm,v7m-nvic";
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		interrupt-controller;
-		reg = <0xe000e100 0xc00>;
-		arm,num-irq-priority-bits = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml
new file mode 100644
index 000000000000..d89eca956c5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,nvic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Nested Vector Interrupt Controller (NVIC)
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  The NVIC provides an interrupt controller that is tightly coupled to Cortex-M
+  based processor cores.  The NVIC implemented on different SoCs vary in the
+  number of interrupts and priority bits per interrupt.
+
+properties:
+  compatible:
+    enum:
+      - arm,v6m-nvic
+      - arm,v7m-nvic
+      - arm,v8m-nvic
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      Number of cells to encode an interrupt source:
+      first = interrupt number, second = priority.
+
+  arm,num-irq-priority-bits:
+    description: Number of priority bits implemented by the SoC
+    minimum: 1
+    maximum: 8
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - arm,num-irq-priority-bits
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@e000e100 {
+        compatible = "arm,v7m-nvic";
+        #interrupt-cells = <2>;
+        #address-cells = <0>;
+        interrupt-controller;
+        reg = <0xe000e100 0xc00>;
+        arm,num-irq-priority-bits = <4>;
+    };
-- 
2.47.2