[PATCH] dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema

[PATCH] dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema

[Rob Herring (Arm)]

Convert the TI Keystone 2 interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../interrupt-controller/ti,keystone-irq.txt  | 36 -----------
 .../interrupt-controller/ti,keystone-irq.yaml | 63 +++++++++++++++++++
 2 files changed, 63 insertions(+), 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
deleted file mode 100644
index 5f94d7739d8d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Keystone 2 IRQ controller IP
-
-On Keystone SOCs, DSP cores can send interrupts to ARM
-host using the IRQ controller IP. It provides 28 IRQ signals to ARM.
-The IRQ handler running on HOST OS can identify DSP signal source by
-analyzing SRCCx bits in IPCARx registers. This is one of the component
-used by the IPC mechanism used on Keystone SOCs.
-
-Required Properties:
-- compatible: should be "ti,keystone-irq"
-- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
-			access device control registers and the offset inside
-			device control registers range.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-					 source should be 1.
-- interrupts: interrupt reference to primary interrupt controller
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-	kirq0: keystone_irq0@26202a0 {
-		compatible = "ti,keystone-irq";
-		ti,syscon-dev = <&devctrl 0x2a0>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	dsp0: dsp0 {
-		compatible = "linux,rproc-user";
-		...
-		interrupt-parent = <&kirq0>;
-		interrupts = <10 2>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml
new file mode 100644
index 000000000000..27d448d1786a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,keystone-irq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone 2 IRQ controller IP
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description:
+  On Keystone SOCs, DSP cores can send interrupts to ARM host using the IRQ
+  controller IP. It provides 28 IRQ signals to ARM. The IRQ handler running on
+  HOST OS can identify DSP signal source by analyzing SRCCx bits in IPCARx
+  registers. This is one of the component used by the IPC mechanism used on
+  Keystone SOCs.
+
+properties:
+  compatible:
+    const: ti,keystone-irq
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,syscon-dev:
+    description: Phandle and offset to syscon device
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to syscon device control registers
+          - description: Offset to control register
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - ti,syscon-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@2a0 {
+      compatible = "ti,keystone-irq";
+      reg = <0x2a0 0x4>;
+      ti,syscon-dev = <&devctrl 0x2a0>;
+      interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
-- 
2.47.2