[net-next v12 6/7] ARM: mxs_defconfig: Update mxs_defconfig to 6.15-rc1

[Lukasz Majewski <lukma@denx.de>]

This file is the updated version of mxs_defconfig for the v6.15-rc1
linux-next.

Detailed description of removed configuration entries:
-CONFIG_MTD_M25P80=y -> it has been replaced MTD_SPI_NOR (which is enabled)
-CONFIG_SMSC_PHY=y -> is enabled implicit by USB_NET_SMSC95XX
-CONFIG_GPIO_SYSFS=y -> it has been deprecated by moving to EXPERT and
                        its replacement GPIO_CDEV is enabled by default

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Suggested-by: Stefan Wahren <wahrenst@gmx.net>

---
Changes for v5:
- New patch

Changes for v6:
- Add detailed description on the removed configuration options
  after update

Changes for v7:
- None

Changes for v8:
- None

Changes for v9:
- None

Changes for v10:
- None

Changes for v11:
- None

Changes for v12:
- None
---
 arch/arm/configs/mxs_defconfig | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 22f7639f61fe..b1a31cb914c8 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -32,9 +32,6 @@ CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=m
@@ -45,7 +42,6 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
@@ -60,7 +56,6 @@ CONFIG_ENC28J60=y
 CONFIG_ICPLUS_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_REALTEK_PHY=y
-CONFIG_SMSC_PHY=y
 CONFIG_CAN_FLEXCAN=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -77,13 +72,11 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_MXS_AUART=y
 # CONFIG_HW_RANDOM is not set
-# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_MXS=y
-CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_STMP3XXX_RTC_WATCHDOG=y
-- 
2.39.5