[PATCH 09/24] drm/amd/display: Correct non-OLED pre_T11_delay.

[Wayne Lin <Wayne.Lin@amd.com>]

From: Zhongwei Zhang <Zhongwei.Zhang@amd.com>

[Why]
Only OLED panels require non-zero pre_T11_delay defaultly.
Others should be controlled by power sequence.

[How]
For non OLED, pre_T11_delay delay in code should be zero.
Also post_T7_delay.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
---
 drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
index 28f37437176e..a8174669bc49 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
@@ -953,8 +953,8 @@ void dce110_edp_backlight_control(
 	struct dc_context *ctx = link->ctx;
 	struct bp_transmitter_control cntl = { 0 };
 	uint8_t pwrseq_instance = 0;
-	unsigned int pre_T11_delay = OLED_PRE_T11_DELAY;
-	unsigned int post_T7_delay = OLED_POST_T7_DELAY;
+	unsigned int pre_T11_delay = (link->dpcd_sink_ext_caps.bits.oled ? OLED_PRE_T11_DELAY : 0);
+	unsigned int post_T7_delay = (link->dpcd_sink_ext_caps.bits.oled ? OLED_POST_T7_DELAY : 0);
 
 	if (dal_graphics_object_id_get_connector_id(link->link_enc->connector)
 		!= CONNECTOR_ID_EDP) {
@@ -1070,7 +1070,8 @@ void dce110_edp_backlight_control(
 	if (!enable) {
 		/*follow oem panel config's requirement*/
 		pre_T11_delay += link->panel_config.pps.extra_pre_t11_ms;
-		msleep(pre_T11_delay);
+		if (pre_T11_delay)
+			msleep(pre_T11_delay);
 	}
 }
 
-- 
2.43.0