From: Wayne Lin <Wayne.Lin@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: Harry Wentland <harry.wentland@amd.com>,
Leo Li <sunpeng.li@amd.com>,
Aurabindo Pillai <aurabindo.pillai@amd.com>,
Roman Li <roman.li@amd.com>, Wayne Lin <wayne.lin@amd.com>,
Tom Chung <chiahsuan.chung@amd.com>,
"Fangzhi Zuo" <jerry.zuo@amd.com>,
Daniel Wheeler <daniel.wheeler@amd.com>, Ray Wu <Ray.Wu@amd.com>,
Alex Hung <alex.hung@amd.com>, Yihan Zhu <Yihan.Zhu@amd.com>,
Jun Lei <jun.lei@amd.com>
Subject: [PATCH 05/24] drm/amd/display: move RMCM programming
Date: Wed, 28 May 2025 10:49:00 +0800 [thread overview]
Message-ID: <20250528025204.79578-6-Wayne.Lin@amd.com> (raw)
In-Reply-To: <20250528025204.79578-1-Wayne.Lin@amd.com>
From: Yihan Zhu <Yihan.Zhu@amd.com>
[WHY & HOW]
Move only RMCM programming outside of dcn401. Extended HW
definition in dc for memory layout to extend support.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
---
drivers/gpu/drm/amd/display/dc/dc.h | 31 ++
drivers/gpu/drm/amd/display/dc/dc_types.h | 2 -
.../dc/dml2/dml21/dml21_translation_helper.c | 4 +-
.../amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 8 -
.../amd/display/dc/hwss/dcn401/dcn401_hwseq.c | 288 +-----------------
.../amd/display/dc/hwss/dcn401/dcn401_hwseq.h | 8 -
.../drm/amd/display/dc/mpc/dcn32/dcn32_mpc.c | 3 -
7 files changed, 42 insertions(+), 302 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 1d917be36fc4..a63f7fe277fa 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -67,6 +67,7 @@ struct dmub_notification;
#define MIN_VIEWPORT_SIZE 12
#define MAX_NUM_EDP 2
#define MAX_HOST_ROUTERS_NUM 2
+#define MAX_SUPPORTED_FORMATS 7
/* Display Core Interfaces */
struct dc_versions {
@@ -192,6 +193,34 @@ struct dpp_color_caps {
struct rom_curve_caps ogam_rom_caps;
};
+/* Below structure is to describe the HW support for mem layout, extend support
+ range to match what OS could handle in the roadmap */
+struct lut3d_caps {
+ uint32_t dma_3d_lut : 1; /*< DMA mode support for 3D LUT */
+ struct {
+ uint32_t swizzle_3d_rgb : 1;
+ uint32_t swizzle_3d_bgr : 1;
+ uint32_t linear_1d : 1;
+ } mem_layout_support;
+ struct {
+ uint32_t unorm_12msb : 1;
+ uint32_t unorm_12lsb : 1;
+ uint32_t float_fp1_5_10 : 1;
+ } mem_format_support;
+ struct {
+ uint32_t order_rgba : 1;
+ uint32_t order_bgra : 1;
+ } mem_pixel_order_support;
+ /*< size options are 9, 17, 33, 45, 65 */
+ struct {
+ uint32_t dim_9 : 1; /* 3D LUT support for 9x9x9 */
+ uint32_t dim_17 : 1; /* 3D LUT support for 17x17x17 */
+ uint32_t dim_33 : 1; /* 3D LUT support for 33x33x33 */
+ uint32_t dim_45 : 1; /* 3D LUT support for 45x45x45 */
+ uint32_t dim_65 : 1; /* 3D LUT support for 65x65x65 */
+ } lut_dim_caps;
+};
+
/**
* struct mpc_color_caps - color pipeline capabilities for multiple pipe and
* plane combined blocks
@@ -211,6 +240,8 @@ struct mpc_color_caps {
uint16_t num_3dluts : 3;
uint16_t shared_3d_lut:1;
struct rom_curve_caps ogam_rom_caps;
+ struct lut3d_caps mcm_3d_lut_caps;
+ struct lut3d_caps rmcm_3d_lut_caps;
};
/**
diff --git a/drivers/gpu/drm/amd/display/dc/dc_types.h b/drivers/gpu/drm/amd/display/dc/dc_types.h
index a4cd0eb39a3a..794b5f30d252 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_types.h
@@ -1255,7 +1255,6 @@ enum dc_cm2_gpu_mem_layout {
enum dc_cm2_gpu_mem_pixel_component_order {
DC_CM2_GPU_MEM_PIXEL_COMPONENT_ORDER_RGBA,
- DC_CM2_GPU_MEM_PIXEL_COMPONENT_ORDER_BGRA
};
enum dc_cm2_gpu_mem_format {
@@ -1277,7 +1276,6 @@ struct dc_cm2_gpu_mem_format_parameters {
enum dc_cm2_gpu_mem_size {
DC_CM2_GPU_MEM_SIZE_171717,
- DC_CM2_GPU_MEM_SIZE_333333,
DC_CM2_GPU_MEM_SIZE_TRANSFORMED,
};
diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c
index d47cacfdb695..8b45b0bcc396 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_translation_helper.c
@@ -888,10 +888,8 @@ static void populate_dml21_plane_config_from_plane_state(struct dml2_context *dm
case DC_CM2_GPU_MEM_SIZE_171717:
plane->tdlut.tdlut_width_mode = dml2_tdlut_width_17_cube;
break;
- case DC_CM2_GPU_MEM_SIZE_333333:
- plane->tdlut.tdlut_width_mode = dml2_tdlut_width_33_cube;
- break;
case DC_CM2_GPU_MEM_SIZE_TRANSFORMED:
+ default:
//plane->tdlut.tdlut_width_mode = dml2_tdlut_width_flatten; // dml2_tdlut_width_flatten undefined
break;
}
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
index c277df12c817..4ea3b4ad179b 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
@@ -1971,14 +1971,6 @@ static void dcn20_program_pipe(
pipe_ctx->plane_state->update_flags.bits.hdr_mult))
hws->funcs.set_hdr_multiplier(pipe_ctx);
- if (hws->funcs.populate_mcm_luts) {
- if (pipe_ctx->plane_state) {
- hws->funcs.populate_mcm_luts(dc, pipe_ctx, pipe_ctx->plane_state->mcm_luts,
- pipe_ctx->plane_state->lut_bank_a);
- pipe_ctx->plane_state->lut_bank_a = !pipe_ctx->plane_state->lut_bank_a;
- }
- }
-
if (pipe_ctx->plane_state &&
(pipe_ctx->plane_state->update_flags.bits.in_transfer_func_change ||
pipe_ctx->plane_state->update_flags.bits.gamma_change ||
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
index c4177a9a662f..ea28c75fdace 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
@@ -2,6 +2,8 @@
//
// Copyright 2024 Advanced Micro Devices, Inc.
+
+#include "os_types.h"
#include "dm_services.h"
#include "basics/dc_common.h"
#include "dm_helpers.h"
@@ -396,249 +398,6 @@ static void dcn401_get_mcm_lut_xable_from_pipe_ctx(struct dc *dc, struct pipe_ct
}
}
-static void dcn401_set_mcm_location_post_blend(struct dc *dc, struct pipe_ctx *pipe_ctx, bool bPostBlend)
-{
- struct mpc *mpc = dc->res_pool->mpc;
- int mpcc_id = pipe_ctx->plane_res.hubp->inst;
-
- if (!pipe_ctx->plane_state)
- return;
-
- mpc->funcs->set_movable_cm_location(mpc, MPCC_MOVABLE_CM_LOCATION_BEFORE, mpcc_id);
- pipe_ctx->plane_state->mcm_location = (bPostBlend) ?
- MPCC_MOVABLE_CM_LOCATION_AFTER :
- MPCC_MOVABLE_CM_LOCATION_BEFORE;
-}
-
-static void dc_get_lut_mode(
- enum dc_cm2_gpu_mem_layout layout,
- enum hubp_3dlut_fl_mode *mode,
- enum hubp_3dlut_fl_addressing_mode *addr_mode)
-{
- switch (layout) {
- case DC_CM2_GPU_MEM_LAYOUT_3D_SWIZZLE_LINEAR_RGB:
- *mode = hubp_3dlut_fl_mode_native_1;
- *addr_mode = hubp_3dlut_fl_addressing_mode_sw_linear;
- break;
- case DC_CM2_GPU_MEM_LAYOUT_3D_SWIZZLE_LINEAR_BGR:
- *mode = hubp_3dlut_fl_mode_native_2;
- *addr_mode = hubp_3dlut_fl_addressing_mode_sw_linear;
- break;
- case DC_CM2_GPU_MEM_LAYOUT_1D_PACKED_LINEAR:
- *mode = hubp_3dlut_fl_mode_transform;
- *addr_mode = hubp_3dlut_fl_addressing_mode_simple_linear;
- break;
- default:
- *mode = hubp_3dlut_fl_mode_disable;
- *addr_mode = hubp_3dlut_fl_addressing_mode_sw_linear;
- break;
- }
-}
-
-static void dc_get_lut_format(
- enum dc_cm2_gpu_mem_format dc_format,
- enum hubp_3dlut_fl_format *format)
-{
- switch (dc_format) {
- case DC_CM2_GPU_MEM_FORMAT_16161616_UNORM_12MSB:
- *format = hubp_3dlut_fl_format_unorm_12msb_bitslice;
- break;
- case DC_CM2_GPU_MEM_FORMAT_16161616_UNORM_12LSB:
- *format = hubp_3dlut_fl_format_unorm_12lsb_bitslice;
- break;
- case DC_CM2_GPU_MEM_FORMAT_16161616_FLOAT_FP1_5_10:
- *format = hubp_3dlut_fl_format_float_fp1_5_10;
- break;
- }
-}
-
-static void dc_get_lut_xbar(
- enum dc_cm2_gpu_mem_pixel_component_order order,
- enum hubp_3dlut_fl_crossbar_bit_slice *cr_r,
- enum hubp_3dlut_fl_crossbar_bit_slice *y_g,
- enum hubp_3dlut_fl_crossbar_bit_slice *cb_b)
-{
- switch (order) {
- case DC_CM2_GPU_MEM_PIXEL_COMPONENT_ORDER_RGBA:
- *cr_r = hubp_3dlut_fl_crossbar_bit_slice_32_47;
- *y_g = hubp_3dlut_fl_crossbar_bit_slice_16_31;
- *cb_b = hubp_3dlut_fl_crossbar_bit_slice_0_15;
- break;
- case DC_CM2_GPU_MEM_PIXEL_COMPONENT_ORDER_BGRA:
- *cr_r = hubp_3dlut_fl_crossbar_bit_slice_0_15;
- *y_g = hubp_3dlut_fl_crossbar_bit_slice_16_31;
- *cb_b = hubp_3dlut_fl_crossbar_bit_slice_32_47;
- break;
- }
-}
-
-static void dc_get_lut_width(
- enum dc_cm2_gpu_mem_size size,
- enum hubp_3dlut_fl_width *width)
-{
- switch (size) {
- case DC_CM2_GPU_MEM_SIZE_333333:
- *width = hubp_3dlut_fl_width_33;
- break;
- case DC_CM2_GPU_MEM_SIZE_171717:
- *width = hubp_3dlut_fl_width_17;
- break;
- case DC_CM2_GPU_MEM_SIZE_TRANSFORMED:
- *width = hubp_3dlut_fl_width_transformed;
- break;
- }
-}
-static bool dc_is_rmcm_3dlut_supported(struct hubp *hubp, struct mpc *mpc)
-{
- if (mpc->funcs->rmcm.update_3dlut_fast_load_select &&
- mpc->funcs->rmcm.program_lut_read_write_control &&
- hubp->funcs->hubp_program_3dlut_fl_addr &&
- mpc->funcs->rmcm.program_bit_depth &&
- hubp->funcs->hubp_program_3dlut_fl_mode &&
- hubp->funcs->hubp_program_3dlut_fl_addressing_mode &&
- hubp->funcs->hubp_program_3dlut_fl_format &&
- hubp->funcs->hubp_update_3dlut_fl_bias_scale &&
- mpc->funcs->rmcm.program_bias_scale &&
- hubp->funcs->hubp_program_3dlut_fl_crossbar &&
- hubp->funcs->hubp_program_3dlut_fl_width &&
- mpc->funcs->rmcm.update_3dlut_fast_load_select &&
- mpc->funcs->rmcm.populate_lut &&
- mpc->funcs->rmcm.program_lut_mode &&
- hubp->funcs->hubp_enable_3dlut_fl &&
- mpc->funcs->rmcm.enable_3dlut_fl)
- return true;
-
- return false;
-}
-
-bool dcn401_program_rmcm_luts(
- struct hubp *hubp,
- struct pipe_ctx *pipe_ctx,
- enum dc_cm2_transfer_func_source lut3d_src,
- struct dc_cm2_func_luts *mcm_luts,
- struct mpc *mpc,
- bool lut_bank_a,
- int mpcc_id)
-{
- struct dpp *dpp_base = pipe_ctx->plane_res.dpp;
- union mcm_lut_params m_lut_params;
- enum MCM_LUT_XABLE shaper_xable, lut3d_xable = MCM_LUT_DISABLE, lut1d_xable;
- enum hubp_3dlut_fl_mode mode;
- enum hubp_3dlut_fl_addressing_mode addr_mode;
- enum hubp_3dlut_fl_format format = 0;
- enum hubp_3dlut_fl_crossbar_bit_slice crossbar_bit_slice_y_g = 0;
- enum hubp_3dlut_fl_crossbar_bit_slice crossbar_bit_slice_cb_b = 0;
- enum hubp_3dlut_fl_crossbar_bit_slice crossbar_bit_slice_cr_r = 0;
- enum hubp_3dlut_fl_width width = 0;
- struct dc *dc = hubp->ctx->dc;
-
- bool bypass_rmcm_3dlut = false;
- bool bypass_rmcm_shaper = false;
-
- dcn401_get_mcm_lut_xable_from_pipe_ctx(dc, pipe_ctx, &shaper_xable, &lut3d_xable, &lut1d_xable);
-
- /* 3DLUT */
- switch (lut3d_src) {
- case DC_CM2_TRANSFER_FUNC_SOURCE_SYSMEM:
- memset(&m_lut_params, 0, sizeof(m_lut_params));
- // Don't know what to do in this case.
- //case DC_CM2_TRANSFER_FUNC_SOURCE_SYSMEM:
- break;
- case DC_CM2_TRANSFER_FUNC_SOURCE_VIDMEM:
- dc_get_lut_width(mcm_luts->lut3d_data.gpu_mem_params.size, &width);
- if (!dc_is_rmcm_3dlut_supported(hubp, mpc) ||
- !mpc->funcs->rmcm.is_config_supported(width))
- return false;
-
- //0. disable fl on mpc
- mpc->funcs->update_3dlut_fast_load_select(mpc, mpcc_id, 0xF);
-
- //1. power down the block
- mpc->funcs->rmcm.power_on_shaper_3dlut(mpc, mpcc_id, false);
-
- //2. program RMCM
- //2a. 3dlut reg programming
- mpc->funcs->rmcm.program_lut_read_write_control(mpc, MCM_LUT_3DLUT, lut_bank_a,
- (!bypass_rmcm_3dlut) && lut3d_xable != MCM_LUT_DISABLE, mpcc_id);
-
- hubp->funcs->hubp_program_3dlut_fl_addr(hubp,
- mcm_luts->lut3d_data.gpu_mem_params.addr);
-
- mpc->funcs->rmcm.program_bit_depth(mpc,
- mcm_luts->lut3d_data.gpu_mem_params.bit_depth, mpcc_id);
-
- // setting native or transformed mode,
- dc_get_lut_mode(mcm_luts->lut3d_data.gpu_mem_params.layout, &mode, &addr_mode);
-
- //these program the mcm 3dlut
- hubp->funcs->hubp_program_3dlut_fl_mode(hubp, mode);
-
- hubp->funcs->hubp_program_3dlut_fl_addressing_mode(hubp, addr_mode);
-
- //seems to be only for the MCM
- dc_get_lut_format(mcm_luts->lut3d_data.gpu_mem_params.format_params.format, &format);
- hubp->funcs->hubp_program_3dlut_fl_format(hubp, format);
-
- mpc->funcs->rmcm.program_bias_scale(mpc,
- mcm_luts->lut3d_data.gpu_mem_params.format_params.float_params.bias,
- mcm_luts->lut3d_data.gpu_mem_params.format_params.float_params.scale,
- mpcc_id);
- hubp->funcs->hubp_update_3dlut_fl_bias_scale(hubp,
- mcm_luts->lut3d_data.gpu_mem_params.format_params.float_params.bias,
- mcm_luts->lut3d_data.gpu_mem_params.format_params.float_params.scale);
-
- dc_get_lut_xbar(
- mcm_luts->lut3d_data.gpu_mem_params.component_order,
- &crossbar_bit_slice_cr_r,
- &crossbar_bit_slice_y_g,
- &crossbar_bit_slice_cb_b);
-
- hubp->funcs->hubp_program_3dlut_fl_crossbar(hubp,
- crossbar_bit_slice_cr_r,
- crossbar_bit_slice_y_g,
- crossbar_bit_slice_cb_b);
-
- mpc->funcs->rmcm.program_3dlut_size(mpc, width, mpcc_id);
-
- mpc->funcs->update_3dlut_fast_load_select(mpc, mpcc_id, hubp->inst);
-
- //2b. shaper reg programming
- memset(&m_lut_params, 0, sizeof(m_lut_params));
-
- if (mcm_luts->shaper->type == TF_TYPE_HWPWL) {
- m_lut_params.pwl = &mcm_luts->shaper->pwl;
- } else if (mcm_luts->shaper->type == TF_TYPE_DISTRIBUTED_POINTS) {
- ASSERT(false);
- cm_helper_translate_curve_to_hw_format(
- dc->ctx,
- mcm_luts->shaper,
- &dpp_base->regamma_params, true);
- m_lut_params.pwl = &dpp_base->regamma_params;
- }
- if (m_lut_params.pwl) {
- mpc->funcs->rmcm.populate_lut(mpc, m_lut_params, lut_bank_a, mpcc_id);
- mpc->funcs->rmcm.program_lut_mode(mpc, !bypass_rmcm_shaper, lut_bank_a, mpcc_id);
- } else {
- //RMCM 3dlut won't work without its shaper
- return false;
- }
-
- //3. Select the hubp connected to this RMCM
- hubp->funcs->hubp_enable_3dlut_fl(hubp, true);
- mpc->funcs->rmcm.enable_3dlut_fl(mpc, true, mpcc_id);
-
- //4. power on the block
- if (m_lut_params.pwl)
- mpc->funcs->rmcm.power_on_shaper_3dlut(mpc, mpcc_id, true);
-
- break;
- default:
- return false;
- }
-
- return true;
-}
-
void dcn401_populate_mcm_luts(struct dc *dc,
struct pipe_ctx *pipe_ctx,
struct dc_cm2_func_luts mcm_luts,
@@ -664,25 +423,6 @@ void dcn401_populate_mcm_luts(struct dc *dc,
dcn401_get_mcm_lut_xable_from_pipe_ctx(dc, pipe_ctx, &shaper_xable, &lut3d_xable, &lut1d_xable);
- //MCM - setting its location (Before/After) blender
- //set to post blend (true)
- dcn401_set_mcm_location_post_blend(
- dc,
- pipe_ctx,
- mcm_luts.lut3d_data.mpc_mcm_post_blend);
-
- //RMCM - 3dLUT+Shaper
- if (mcm_luts.lut3d_data.rmcm_3dlut_enable) {
- dcn401_program_rmcm_luts(
- hubp,
- pipe_ctx,
- lut3d_src,
- &mcm_luts,
- mpc,
- lut_bank_a,
- mpcc_id);
- }
-
/* 1D LUT */
if (mcm_luts.lut1d_func) {
memset(&m_lut_params, 0, sizeof(m_lut_params));
@@ -740,9 +480,6 @@ void dcn401_populate_mcm_luts(struct dc *dc,
break;
case DC_CM2_TRANSFER_FUNC_SOURCE_VIDMEM:
switch (mcm_luts.lut3d_data.gpu_mem_params.size) {
- case DC_CM2_GPU_MEM_SIZE_333333:
- width = hubp_3dlut_fl_width_33;
- break;
case DC_CM2_GPU_MEM_SIZE_171717:
width = hubp_3dlut_fl_width_17;
break;
@@ -817,11 +554,14 @@ void dcn401_populate_mcm_luts(struct dc *dc,
//navi 4x has a bug and r and blue are swapped and need to be worked around here in
//TODO: need to make a method for get_xbar per asic OR do the workaround in program_crossbar for 4x
- dc_get_lut_xbar(
- mcm_luts.lut3d_data.gpu_mem_params.component_order,
- &crossbar_bit_slice_cr_r,
- &crossbar_bit_slice_y_g,
- &crossbar_bit_slice_cb_b);
+ switch (mcm_luts.lut3d_data.gpu_mem_params.component_order) {
+ case DC_CM2_GPU_MEM_PIXEL_COMPONENT_ORDER_RGBA:
+ default:
+ crossbar_bit_slice_cr_r = hubp_3dlut_fl_crossbar_bit_slice_0_15;
+ crossbar_bit_slice_y_g = hubp_3dlut_fl_crossbar_bit_slice_16_31;
+ crossbar_bit_slice_cb_b = hubp_3dlut_fl_crossbar_bit_slice_32_47;
+ break;
+ }
if (hubp->funcs->hubp_program_3dlut_fl_crossbar)
hubp->funcs->hubp_program_3dlut_fl_crossbar(hubp,
@@ -2269,14 +2009,6 @@ void dcn401_program_pipe(
pipe_ctx->plane_state->update_flags.bits.hdr_mult))
hws->funcs.set_hdr_multiplier(pipe_ctx);
- if (hws->funcs.populate_mcm_luts) {
- if (pipe_ctx->plane_state) {
- hws->funcs.populate_mcm_luts(dc, pipe_ctx, pipe_ctx->plane_state->mcm_luts,
- pipe_ctx->plane_state->lut_bank_a);
- pipe_ctx->plane_state->lut_bank_a = !pipe_ctx->plane_state->lut_bank_a;
- }
- }
-
if (pipe_ctx->plane_state &&
(pipe_ctx->plane_state->update_flags.bits.in_transfer_func_change ||
pipe_ctx->plane_state->update_flags.bits.gamma_change ||
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.h b/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.h
index ce65b4f6c672..781cf0efccc6 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.h
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.h
@@ -109,12 +109,4 @@ void dcn401_detect_pipe_changes(
void dcn401_plane_atomic_power_down(struct dc *dc,
struct dpp *dpp,
struct hubp *hubp);
-bool dcn401_program_rmcm_luts(
- struct hubp *hubp,
- struct pipe_ctx *pipe_ctx,
- enum dc_cm2_transfer_func_source lut3d_src,
- struct dc_cm2_func_luts *mcm_luts,
- struct mpc *mpc,
- bool lut_bank_a,
- int mpcc_id);
#endif /* __DC_HWSS_DCN401_H__ */
diff --git a/drivers/gpu/drm/amd/display/dc/mpc/dcn32/dcn32_mpc.c b/drivers/gpu/drm/amd/display/dc/mpc/dcn32/dcn32_mpc.c
index b4cea2b8cb2a..50ea62a009e8 100644
--- a/drivers/gpu/drm/amd/display/dc/mpc/dcn32/dcn32_mpc.c
+++ b/drivers/gpu/drm/amd/display/dc/mpc/dcn32/dcn32_mpc.c
@@ -30,7 +30,6 @@
#include "basics/conversion.h"
#include "dcn10/dcn10_cm_common.h"
#include "dc.h"
-#include "dcn401/dcn401_mpc.h"
#define REG(reg)\
mpc30->mpc_regs->reg
@@ -1022,8 +1021,6 @@ static const struct mpc_funcs dcn32_mpc_funcs = {
.power_on_mpc_mem_pwr = mpc3_power_on_ogam_lut,
.get_mpc_out_mux = mpc1_get_mpc_out_mux,
.set_bg_color = mpc1_set_bg_color,
- .set_movable_cm_location = mpc401_set_movable_cm_location,
- .populate_lut = mpc401_populate_lut,
};
--
2.43.0
next prev parent reply other threads:[~2025-05-28 2:52 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-28 2:48 [PATCH 00/24] DC Patches June 2nd, 2025 Wayne Lin
2025-05-28 2:48 ` [PATCH 01/24] drm/amd/display: [FW Promotion] Release 0.1.11.0 Wayne Lin
2025-05-28 2:48 ` [PATCH 02/24] drm/amd/display: Re-order FAMS2 sub commands Wayne Lin
2025-05-28 2:48 ` [PATCH 03/24] drm/amd/display: DML21 Fixes Wayne Lin
2025-05-28 2:48 ` [PATCH 04/24] drm/amd/display: Support OLED SDR with AMD ABC Wayne Lin
2025-05-28 2:49 ` Wayne Lin [this message]
2025-05-28 2:49 ` [PATCH 06/24] drm/amd/display: Indirect buffer transport for FAMS2 commands Wayne Lin
2025-05-28 2:49 ` [PATCH 07/24] drm/amd/display: Drop unnecessary `amdgpu` prefix Wayne Lin
2025-05-28 2:49 ` [PATCH 08/24] drm/amd/display: Call setup_stream_attribute after stream enc clk is ungated Wayne Lin
2025-05-28 2:49 ` [PATCH 09/24] drm/amd/display: Correct non-OLED pre_T11_delay Wayne Lin
2025-05-28 2:49 ` [PATCH 10/24] drm/amd/display: Avoid trying AUX transactions on disconnected ports Wayne Lin
2025-05-28 2:49 ` [PATCH 11/24] drm/amd/display: Add disconnect case on dongle check Wayne Lin
2025-05-28 2:49 ` [PATCH 12/24] drm/amd/display: Add DML path for FAMS methods Wayne Lin
2025-05-28 2:49 ` [PATCH 13/24] drm/amd/display: Do not bypass chroma scaling in 1:1 case Wayne Lin
2025-05-28 2:49 ` [PATCH 14/24] drm/amd/display: Add support for 2nd sharpening range Wayne Lin
2025-05-28 2:49 ` [PATCH 15/24] drm/amd/display: Move vmalloc include to header file Wayne Lin
2025-05-28 2:49 ` [PATCH 16/24] drm/amd/display: [FW Promotion] Release 0.1.12.0 Wayne Lin
2025-05-28 2:49 ` [PATCH 17/24] drm/amd/display: Promote DAL to 3.2.335 Wayne Lin
2025-05-28 2:49 ` [PATCH 18/24] drm/amd/display: Update DMCUB loading sequence for DCN3.5 Wayne Lin
2025-05-28 2:49 ` [PATCH 19/24] drm/amd/display: replace fast_validate with enum dc_validate_mode Wayne Lin
2025-05-28 2:49 ` [PATCH 20/24] drm/amd/display: Avoid calling blank_stream() twice Wayne Lin
2025-05-28 2:49 ` [PATCH 21/24] drm/amd/display: Use DC log instead of using DM error msg Wayne Lin
2025-05-28 2:49 ` [PATCH 22/24] drm/amd/display: Add debugging message for brightness caps Wayne Lin
2025-05-28 2:49 ` [PATCH 23/24] drm/amd/display: Fix default DC and AC levels Wayne Lin
2025-05-28 2:49 ` [PATCH 24/24] drm/amd/display: Promote DAL to 3.2.336 Wayne Lin
2025-06-02 13:24 ` [PATCH 00/24] DC Patches June 2nd, 2025 Wheeler, Daniel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250528025204.79578-6-Wayne.Lin@amd.com \
--to=wayne.lin@amd.com \
--cc=Ray.Wu@amd.com \
--cc=Yihan.Zhu@amd.com \
--cc=alex.hung@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=aurabindo.pillai@amd.com \
--cc=chiahsuan.chung@amd.com \
--cc=daniel.wheeler@amd.com \
--cc=harry.wentland@amd.com \
--cc=jerry.zuo@amd.com \
--cc=jun.lei@amd.com \
--cc=roman.li@amd.com \
--cc=sunpeng.li@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.