[PATCH 1/1] staging: sm750fb: convert CamelCase function names to snake_case

[khalid.datamax@gmail.com]

From: Khalid Faisal <khalid.datamax@gmail.com>

This patch converts function names in the sm750fb driver from CamelCase to
snake_case to comply with Linux kernel coding style.

No functional changes.

Signed-off-by: Khalid Faisal <khalid.datamax@gmail.com>
---
 drivers/staging/sm750fb/ddk750_dvi.c    | 16 +++++------
 drivers/staging/sm750fb/ddk750_sii164.c | 38 ++++++++++++-------------
 drivers/staging/sm750fb/ddk750_sii164.h | 16 +++++------
 3 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 8b81e8642..6fef1ab48 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -16,15 +16,15 @@ static struct dvi_ctrl_device dcft_supported_dvi_controller[] = {
 	{
 		.init = sii164_init_chip,
 		.get_vendor_id = sii164_get_vendor_id,
-		.get_device_id = sii164GetDeviceID,
+		.get_device_id = sii164_get_device_id,
 #ifdef SII164_FULL_FUNCTIONS
-		.reset_chip = sii164ResetChip,
-		.get_chip_string = sii164GetChipString,
-		.set_power = sii164SetPower,
-		.enable_hot_plug_detection = sii164EnableHotPlugDetection,
-		.is_connected = sii164IsConnected,
-		.check_interrupt = sii164CheckInterrupt,
-		.clear_interrupt = sii164ClearInterrupt,
+		.reset_chip = sii164_reset_chip,
+		.get_chip_string = sii164_get_chip_string,
+		.set_power = sii164_set_power,
+		.enable_hot_plug_detection = sii164_enable_hot_plug_detection,
+		.is_connected = sii164_is_connected,
+		.check_interrupt = sii164_check_interrupt,
+		.clear_interrupt = sii164_clear_interrupt,
 #endif
 	},
 #endif
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 2532b6024..d6bfd7c4e 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -48,13 +48,13 @@ unsigned short sii164_get_vendor_id(void)
 }
 
 /*
- *  sii164GetDeviceID
+ *  sii164_get_device_id
  *      This function gets the device ID of the DVI controller chip.
  *
  *  Output:
  *      Device ID
  */
-unsigned short sii164GetDeviceID(void)
+unsigned short sii164_get_device_id(void)
 {
 	unsigned short deviceID;
 
@@ -141,7 +141,7 @@ long sii164_init_chip(unsigned char edge_select,
 
 	/* Check if SII164 Chip exists */
 	if ((sii164_get_vendor_id() == SII164_VENDOR_ID) &&
-	    (sii164GetDeviceID() == SII164_DEVICE_ID)) {
+	    (sii164_get_device_id() == SII164_DEVICE_ID)) {
 		/*
 		 *  Initialize SII164 controller chip.
 		 */
@@ -250,36 +250,36 @@ long sii164_init_chip(unsigned char edge_select,
 #ifdef SII164_FULL_FUNCTIONS
 
 /*
- *  sii164ResetChip
+ *  sii164_reset_chip
  *      This function resets the DVI Controller Chip.
  */
-void sii164ResetChip(void)
+void sii164_reset_chip(void)
 {
 	/* Power down */
-	sii164SetPower(0);
-	sii164SetPower(1);
+	sii164_set_power(0);
+	sii164_set_power(1);
 }
 
 /*
- * sii164GetChipString
+ * sii164_get_chip_string
  *      This function returns a char string name of the current DVI Controller
  *      chip.
  *
  *      It's convenient for application need to display the chip name.
  */
-char *sii164GetChipString(void)
+char *sii164_get_chip_string(void)
 {
 	return gDviCtrlChipName;
 }
 
 /*
- *  sii164SetPower
+ *  sii164_set_power
  *      This function sets the power configuration of the DVI Controller Chip.
  *
  *  Input:
  *      powerUp - Flag to set the power down or up
  */
-void sii164SetPower(unsigned char powerUp)
+void sii164_set_power(unsigned char powerUp)
 {
 	unsigned char config;
 
@@ -329,12 +329,12 @@ void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode)
 }
 
 /*
- *  sii164EnableHotPlugDetection
+ *  sii164_enable_hot_plug_detection
  *      This function enables the Hot Plug detection.
  *
  *  enableHotPlug   - Enable (=1) / disable (=0) Hot Plug detection
  */
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug)
+void sii164_enable_hot_plug_detection(unsigned char enableHotPlug)
 {
 	unsigned char detectReg;
 
@@ -350,14 +350,14 @@ void sii164EnableHotPlugDetection(unsigned char enableHotPlug)
 }
 
 /*
- *  sii164IsConnected
+ *  sii164_is_connected
  *      Check if the DVI Monitor is connected.
  *
  *  Output:
  *      0   - Not Connected
  *      1   - Connected
  */
-unsigned char sii164IsConnected(void)
+unsigned char sii164_is_connected(void)
 {
 	unsigned char hotPlugValue;
 
@@ -370,14 +370,14 @@ unsigned char sii164IsConnected(void)
 }
 
 /*
- *  sii164CheckInterrupt
+ *  sii164_check_interrupt
  *      Checks if interrupt has occurred.
  *
  *  Output:
  *      0   - No interrupt
  *      1   - Interrupt occurs
  */
-unsigned char sii164CheckInterrupt(void)
+unsigned char sii164_check_interrupt(void)
 {
 	unsigned char detectReg;
 
@@ -390,10 +390,10 @@ unsigned char sii164CheckInterrupt(void)
 }
 
 /*
- *  sii164ClearInterrupt
+ *  sii164_clear_interrupt
  *      Clear the hot plug interrupt.
  */
-void sii164ClearInterrupt(void)
+void sii164_clear_interrupt(void)
 {
 	unsigned char detectReg;
 
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index 71a7c1cb4..005473ca2 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -28,16 +28,16 @@ long sii164_init_chip(unsigned char edgeSelect,
 		      unsigned char pllFilterValue);
 
 unsigned short sii164_get_vendor_id(void);
-unsigned short sii164GetDeviceID(void);
+unsigned short sii164_get_device_id(void);
 
 #ifdef SII164_FULL_FUNCTIONS
-void sii164ResetChip(void);
-char *sii164GetChipString(void);
-void sii164SetPower(unsigned char powerUp);
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug);
-unsigned char sii164IsConnected(void);
-unsigned char sii164CheckInterrupt(void);
-void sii164ClearInterrupt(void);
+void sii164_reset_chip(void);
+char *sii164_get_chip_string(void);
+void sii164_set_power(unsigned char powerUp);
+void sii164_enable_hot_plug_detection(unsigned char enableHotPlug);
+unsigned char sii164_is_connected(void);
+unsigned char sii164_check_interrupt(void);
+void sii164_clear_interrupt(void);
 #endif
 /*
  * below register definition is used for
-- 
2.43.0