From: Alex Elder <elder@riscstar.com>
To: mturquette@baylibre.com, sboyd@kernel.org
Cc: dlan@gentoo.org, heylenay@4d2.org, inochiama@outlook.com,
elder@riscstar.com, linux-clk@vger.kernel.org,
spacemit@lists.linux.dev, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, Guodong Xu <guodong@riscstar.com>
Subject: [PATCH] clk: spacemit: mark K1 pll1_d8 as critical
Date: Mon, 9 Jun 2025 15:08:21 -0500 [thread overview]
Message-ID: <20250609200822.468482-1-elder@riscstar.com> (raw)
The pll1_d8 clock is enabled by the boot loader, and is ultimately a
parent for numerous clocks, including those used by APB and AXI buses.
Guodong Xu discovered that this clock got disabled while responding to
getting -EPROBE_DEFER when requesting a reset controller.
The needed clock (CLK_DMA, along with its parents) had already been
enabled. To respond to the probe deferral return, the CLK_DMA clock
was disabled, and this led to parent clocks also reducing their enable
count. When the enable count for pll1_d8 was decremented it became 0,
which caused it to be disabled. This led to a system hang.
Marking that clock critical resolves this by preventing it from being
disabled.
Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to
be supplied for a CCU_FACTOR_GATE clock.
Fixes: 1b72c59db0add ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Tested-by: Guodong Xu <guodong@riscstar.com>
---
v2: Reworded the description to provide better detail
drivers/clk/spacemit/ccu-k1.c | 3 ++-
drivers/clk/spacemit/ccu_mix.h | 21 +++++++++++++--------
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index cdde37a052353..df65009a07bb1 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -170,7 +170,8 @@ CCU_FACTOR_GATE_DEFINE(pll1_d4, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(3), 4,
CCU_FACTOR_GATE_DEFINE(pll1_d5, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(4), 5, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d6, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(5), 6, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d7, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(6), 7, 1);
-CCU_FACTOR_GATE_DEFINE(pll1_d8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(7), 8, 1);
+CCU_FACTOR_GATE_FLAGS_DEFINE(pll1_d8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(7), 8, 1,
+ CLK_IS_CRITICAL);
CCU_FACTOR_GATE_DEFINE(pll1_d11_223p4, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(15), 11, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d13_189, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(16), 13, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d23_106p8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(20), 23, 1);
diff --git a/drivers/clk/spacemit/ccu_mix.h b/drivers/clk/spacemit/ccu_mix.h
index 51d19f5d6aacb..668c8139339e1 100644
--- a/drivers/clk/spacemit/ccu_mix.h
+++ b/drivers/clk/spacemit/ccu_mix.h
@@ -101,16 +101,21 @@ static struct ccu_mix _name = { \
} \
}
+#define CCU_FACTOR_GATE_FLAGS_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
+ _mul, _flags) \
+struct ccu_mix _name = { \
+ .gate = CCU_GATE_INIT(_mask_gate), \
+ .factor = CCU_FACTOR_INIT(_div, _mul), \
+ .common = { \
+ .reg_ctrl = _reg_ctrl, \
+ CCU_MIX_INITHW(_name, _parent, spacemit_ccu_factor_gate_ops, _flags) \
+ } \
+}
+
#define CCU_FACTOR_GATE_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
_mul) \
-static struct ccu_mix _name = { \
- .gate = CCU_GATE_INIT(_mask_gate), \
- .factor = CCU_FACTOR_INIT(_div, _mul), \
- .common = { \
- .reg_ctrl = _reg_ctrl, \
- CCU_MIX_INITHW(_name, _parent, spacemit_ccu_factor_gate_ops, 0) \
- } \
-}
+ CCU_FACTOR_GATE_FLAGS_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
+ _mul, 0)
#define CCU_MUX_GATE_DEFINE(_name, _parents, _reg_ctrl, _shift, _width, \
_mask_gate, _flags) \
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
--
2.45.2
WARNING: multiple messages have this Message-ID (diff)
From: Alex Elder <elder@riscstar.com>
To: mturquette@baylibre.com, sboyd@kernel.org
Cc: dlan@gentoo.org, heylenay@4d2.org, inochiama@outlook.com,
elder@riscstar.com, linux-clk@vger.kernel.org,
spacemit@lists.linux.dev, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, Guodong Xu <guodong@riscstar.com>
Subject: [PATCH] clk: spacemit: mark K1 pll1_d8 as critical
Date: Mon, 9 Jun 2025 15:08:21 -0500 [thread overview]
Message-ID: <20250609200822.468482-1-elder@riscstar.com> (raw)
The pll1_d8 clock is enabled by the boot loader, and is ultimately a
parent for numerous clocks, including those used by APB and AXI buses.
Guodong Xu discovered that this clock got disabled while responding to
getting -EPROBE_DEFER when requesting a reset controller.
The needed clock (CLK_DMA, along with its parents) had already been
enabled. To respond to the probe deferral return, the CLK_DMA clock
was disabled, and this led to parent clocks also reducing their enable
count. When the enable count for pll1_d8 was decremented it became 0,
which caused it to be disabled. This led to a system hang.
Marking that clock critical resolves this by preventing it from being
disabled.
Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to
be supplied for a CCU_FACTOR_GATE clock.
Fixes: 1b72c59db0add ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Tested-by: Guodong Xu <guodong@riscstar.com>
---
v2: Reworded the description to provide better detail
drivers/clk/spacemit/ccu-k1.c | 3 ++-
drivers/clk/spacemit/ccu_mix.h | 21 +++++++++++++--------
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index cdde37a052353..df65009a07bb1 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -170,7 +170,8 @@ CCU_FACTOR_GATE_DEFINE(pll1_d4, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(3), 4,
CCU_FACTOR_GATE_DEFINE(pll1_d5, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(4), 5, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d6, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(5), 6, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d7, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(6), 7, 1);
-CCU_FACTOR_GATE_DEFINE(pll1_d8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(7), 8, 1);
+CCU_FACTOR_GATE_FLAGS_DEFINE(pll1_d8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(7), 8, 1,
+ CLK_IS_CRITICAL);
CCU_FACTOR_GATE_DEFINE(pll1_d11_223p4, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(15), 11, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d13_189, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(16), 13, 1);
CCU_FACTOR_GATE_DEFINE(pll1_d23_106p8, CCU_PARENT_HW(pll1), APBS_PLL1_SWCR2, BIT(20), 23, 1);
diff --git a/drivers/clk/spacemit/ccu_mix.h b/drivers/clk/spacemit/ccu_mix.h
index 51d19f5d6aacb..668c8139339e1 100644
--- a/drivers/clk/spacemit/ccu_mix.h
+++ b/drivers/clk/spacemit/ccu_mix.h
@@ -101,16 +101,21 @@ static struct ccu_mix _name = { \
} \
}
+#define CCU_FACTOR_GATE_FLAGS_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
+ _mul, _flags) \
+struct ccu_mix _name = { \
+ .gate = CCU_GATE_INIT(_mask_gate), \
+ .factor = CCU_FACTOR_INIT(_div, _mul), \
+ .common = { \
+ .reg_ctrl = _reg_ctrl, \
+ CCU_MIX_INITHW(_name, _parent, spacemit_ccu_factor_gate_ops, _flags) \
+ } \
+}
+
#define CCU_FACTOR_GATE_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
_mul) \
-static struct ccu_mix _name = { \
- .gate = CCU_GATE_INIT(_mask_gate), \
- .factor = CCU_FACTOR_INIT(_div, _mul), \
- .common = { \
- .reg_ctrl = _reg_ctrl, \
- CCU_MIX_INITHW(_name, _parent, spacemit_ccu_factor_gate_ops, 0) \
- } \
-}
+ CCU_FACTOR_GATE_FLAGS_DEFINE(_name, _parent, _reg_ctrl, _mask_gate, _div, \
+ _mul, 0)
#define CCU_MUX_GATE_DEFINE(_name, _parents, _reg_ctrl, _shift, _width, \
_mask_gate, _flags) \
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
--
2.45.2
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2025-06-09 20:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-09 20:08 Alex Elder [this message]
2025-06-09 20:08 ` [PATCH] clk: spacemit: mark K1 pll1_d8 as critical Alex Elder
2025-06-09 20:14 ` Alex Elder
2025-06-09 20:14 ` Alex Elder
2025-06-10 2:24 ` Haylen Chu
2025-06-10 2:24 ` Haylen Chu
-- strict thread matches above, loose matches on Subject: below --
2025-06-07 20:27 Alex Elder
2025-06-07 20:27 ` Alex Elder
2025-06-08 0:24 ` Yixun Lan
2025-06-08 0:24 ` Yixun Lan
2025-06-08 2:46 ` Alex Elder
2025-06-08 2:46 ` Alex Elder
2025-06-08 4:46 ` Haylen Chu
2025-06-08 4:46 ` Haylen Chu
2025-06-08 12:56 ` Yixun Lan
2025-06-08 12:56 ` Yixun Lan
2025-06-08 18:31 ` Alex Elder
2025-06-08 18:31 ` Alex Elder
2025-06-09 4:21 ` Haylen Chu
2025-06-09 4:21 ` Haylen Chu
2025-06-08 19:30 ` kernel test robot
2025-06-08 19:30 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250609200822.468482-1-elder@riscstar.com \
--to=elder@riscstar.com \
--cc=dlan@gentoo.org \
--cc=guodong@riscstar.com \
--cc=heylenay@4d2.org \
--cc=inochiama@outlook.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.