All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hansg@kernel.org>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans de Goede <hansg@kernel.org>,
	Mathis Foerst <mathis.foerst@mt.com>,
	linux-media@vger.kernel.org
Subject: [PATCH v3 09/15] media: mt9m114: Add and use mt9m114_ifp_get_border() helper function
Date: Sun, 29 Jun 2025 22:56:19 +0200	[thread overview]
Message-ID: <20250629205626.68341-10-hansg@kernel.org> (raw)
In-Reply-To: <20250629205626.68341-1-hansg@kernel.org>

Normally the IFP removes a 4 pixel border all around its sink format
size for demosaicing. But in RAW10 mode it does not do this.

Add a new mt9m114_ifp_get_border() helper function to get the border size
(4 or 0) and use this where applicable instead of hardcoding a border
of 4 pixels everywhere.

Signed-off-by: Hans de Goede <hansg@kernel.org>
---
Changes in v3:
- New patch in v3 of this patch-set
---
 drivers/media/i2c/mt9m114.c | 54 ++++++++++++++++++++++++++-----------
 1 file changed, 38 insertions(+), 16 deletions(-)

diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c
index d4aad77b095b..020caae95a3d 100644
--- a/drivers/media/i2c/mt9m114.c
+++ b/drivers/media/i2c/mt9m114.c
@@ -843,6 +843,18 @@ static int mt9m114_configure_pa(struct mt9m114 *sensor,
 	return ret;
 }
 
+/*
+ * For src pad fmts other then RAW10 the IFP removes a 4 pixel border from its
+ * sink pad format size for demosaicing.
+ */
+static int mt9m114_ifp_get_border(struct v4l2_subdev_state *state)
+{
+	const struct v4l2_mbus_framefmt *format =
+		v4l2_subdev_state_get_format(state, 1);
+
+	return format->code == MEDIA_BUS_FMT_SGRBG10_1X10 ? 0 : 4;
+}
+
 static int mt9m114_configure_ifp(struct mt9m114 *sensor,
 				 struct v4l2_subdev_state *state)
 {
@@ -850,6 +862,7 @@ static int mt9m114_configure_ifp(struct mt9m114 *sensor,
 	const struct v4l2_mbus_framefmt *format;
 	const struct v4l2_rect *crop;
 	const struct v4l2_rect *compose;
+	unsigned int border;
 	u64 output_format;
 	int ret = 0;
 
@@ -864,15 +877,18 @@ static int mt9m114_configure_ifp(struct mt9m114 *sensor,
 		return ret;
 
 	/*
+	 * For src pad fmts other then RAW10 adjust cropping coordinates for
 	 * Color pipeline (IFP) cropping and scaling. Subtract 4 from the left
 	 * and top coordinates to compensate for the lines and columns removed
 	 * by demosaicing that are taken into account in the crop rectangle but
 	 * not in the hardware.
 	 */
+	border = mt9m114_ifp_get_border(state);
+
 	cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_XOFFSET,
-		  crop->left - 4, &ret);
+		  crop->left - border, &ret);
 	cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_YOFFSET,
-		  crop->top - 4, &ret);
+		  crop->top - border, &ret);
 	cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_WIDTH,
 		  crop->width, &ret);
 	cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_HEIGHT,
@@ -1845,6 +1861,7 @@ static int mt9m114_ifp_get_selection(struct v4l2_subdev *sd,
 {
 	const struct v4l2_mbus_framefmt *format;
 	const struct v4l2_rect *crop;
+	unsigned int border;
 	int ret = 0;
 
 	/* Crop and compose are only supported on the sink pad. */
@@ -1859,15 +1876,17 @@ static int mt9m114_ifp_get_selection(struct v4l2_subdev *sd,
 	case V4L2_SEL_TGT_CROP_DEFAULT:
 	case V4L2_SEL_TGT_CROP_BOUNDS:
 		/*
-		 * The crop default and bounds are equal to the sink
-		 * format size minus 4 pixels on each side for demosaicing.
+		 * Crop defaults and bounds are equal to the sink format size.
+		 * For src pad fmts other then RAW10 this gets reduced by 4
+		 * pixels on each side for demosaicing.
 		 */
 		format = v4l2_subdev_state_get_format(state, 0);
+		border = mt9m114_ifp_get_border(state);
 
-		sel->r.left = 4;
-		sel->r.top = 4;
-		sel->r.width = format->width - 8;
-		sel->r.height = format->height - 8;
+		sel->r.left = border;
+		sel->r.top = border;
+		sel->r.width = format->width - 2 * border;
+		sel->r.height = format->height - 2 * border;
 		break;
 
 	case V4L2_SEL_TGT_COMPOSE:
@@ -1902,6 +1921,7 @@ static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
 	struct v4l2_mbus_framefmt *format;
 	struct v4l2_rect *crop;
 	struct v4l2_rect *compose;
+	unsigned int border;
 
 	if (sel->target != V4L2_SEL_TGT_CROP &&
 	    sel->target != V4L2_SEL_TGT_COMPOSE)
@@ -1917,21 +1937,23 @@ static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
 
 	if (sel->target == V4L2_SEL_TGT_CROP) {
 		/*
-		 * Clamp the crop rectangle. Demosaicing removes 4 pixels on
-		 * each side of the image.
+		 * Clamp the crop rectangle. For src pad fmts other then RAW10
+		 * demosaicing removes 4 pixels on each side of the image.
 		 */
-		crop->left = clamp_t(unsigned int, ALIGN(sel->r.left, 2), 4,
-				     format->width - 4 -
+		border = mt9m114_ifp_get_border(state);
+
+		crop->left = clamp_t(unsigned int, ALIGN(sel->r.left, 2), border,
+				     format->width - border -
 				     MT9M114_SCALER_CROPPED_INPUT_WIDTH);
-		crop->top = clamp_t(unsigned int, ALIGN(sel->r.top, 2), 4,
-				    format->height - 4 -
+		crop->top = clamp_t(unsigned int, ALIGN(sel->r.top, 2), border,
+				    format->height - border -
 				    MT9M114_SCALER_CROPPED_INPUT_HEIGHT);
 		crop->width = clamp_t(unsigned int, ALIGN(sel->r.width, 2),
 				      MT9M114_SCALER_CROPPED_INPUT_WIDTH,
-				      format->width - 4 - crop->left);
+				      format->width - border - crop->left);
 		crop->height = clamp_t(unsigned int, ALIGN(sel->r.height, 2),
 				       MT9M114_SCALER_CROPPED_INPUT_HEIGHT,
-				       format->height - 4 - crop->top);
+				       format->height - border - crop->top);
 
 		sel->r = *crop;
 
-- 
2.49.0


  parent reply	other threads:[~2025-06-29 20:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-29 20:56 [PATCH v3 00/15] media: mt9m114: Changes to make it work with atomisp devices Hans de Goede
2025-06-29 20:56 ` [PATCH v3 01/15] media: aptina-pll: Debug log p1 min and max values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 02/15] media: mt9m114: Add support for clock-frequency property Hans de Goede
2025-06-29 20:56 ` [PATCH v3 03/15] media: mt9m114: Use aptina-PLL helper to get PLL values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 04/15] media: mt9m114: Lower minimum vblank value Hans de Goede
2025-06-29 20:56 ` [PATCH v3 05/15] media: mt9m114: Fix default hblank and vblank values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 06/15] media: mt9m114: Tweak default hblank and vblank for more accurate fps Hans de Goede
2025-06-29 20:56 ` [PATCH v3 07/15] media: mt9m114: Avoid a reset low spike during probe() Hans de Goede
2025-06-29 20:56 ` [PATCH v3 08/15] media: mt9m114: Put sensor in reset on power down Hans de Goede
2025-06-29 20:56 ` Hans de Goede [this message]
2025-07-02  0:17   ` [PATCH v3 09/15] media: mt9m114: Add and use mt9m114_ifp_get_border() helper function Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 10/15] media: mt9m114: Adjust IFP selections and src format when src pixelfmt changes to/from RAW10 Hans de Goede
2025-07-02  0:32   ` Laurent Pinchart
2025-12-23 13:33     ` Hans de Goede
2025-06-29 20:56 ` [PATCH v3 11/15] media: mt9m114: Update src pad sel and format when sink pad format changes Hans de Goede
2025-07-02  0:36   ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 12/15] media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler Hans de Goede
2025-07-02  0:42   ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 13/15] media: mt9m114: Drop start-, stop-streaming sequence from initialize Hans de Goede
2025-07-02  1:08   ` Laurent Pinchart
2025-12-23 13:37     ` Hans de Goede
2025-12-23 16:50       ` Laurent Pinchart
2025-12-23 16:57         ` Hans de Goede
2025-06-29 20:56 ` [PATCH v3 14/15] media: mt9m114: Return -EPROBE_DEFER if no endpoint is found Hans de Goede
2025-07-02  0:53   ` Laurent Pinchart
2025-12-24 12:12     ` Hans de Goede
2025-12-27 14:54       ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 15/15] media: mt9m114: Add ACPI enumeration support Hans de Goede
     [not found] ` <6861b00f.050a0220.379e4a.5185@mx.google.com>
2025-06-30  7:34   ` [v3,00/15] media: mt9m114: Changes to make it work with atomisp devices Hans de Goede
2025-06-30 22:28 ` [PATCH v3 00/15] " Laurent Pinchart
2025-07-01 13:21   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250629205626.68341-10-hansg@kernel.org \
    --to=hansg@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mathis.foerst@mt.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.