Re: [v3,00/15] media: mt9m114: Changes to make it work with atomisp devices

[Hans de Goede <hansg@kernel.org>]

Hi All,
On 29-Jun-25 11:28 PM, Patchwork Integration wrote:
> Dear Hans de Goede:
> 
> Thanks for your patches! Unfortunately the Media CI robot has not been
> able to test them.
> 
> Make sure that the whole series 20250629205626.68341-1-hansg@kernel.org is
> available at lore. And that it can be cherry-picked on top the "next"
> branch of "https://gitlab.freedesktop.org/linux-media/media-committers.git".
> 
> You can try something like this:
>     git fetch https://gitlab.freedesktop.org/linux-media/media-committers.git next
>     git checkout FETCH_HEAD
>     b4 shazam 20250629205626.68341-1-hansg@kernel.org

My bad, this is based on top of:

https://git.linuxtv.org/sailus/media_tree.git/log/?h=fixes

since that has some pending mt9m114 patches. I should have
added a base-commit to the cover-letter.

Regards,

Hans















> Error message:
> Trying branch next c0b1da281d84d33281fc49289f0c7f8aada450ff...
> Running in OFFLINE mode
> Analyzing 16 messages in the thread
> Checking attestation on all messages, may take a moment...
> ---
>   [PATCH v3 1/15] media: aptina-pll: Debug log p1 min and max values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-2-hansg@kernel.org
>   [PATCH v3 2/15] media: mt9m114: Add support for clock-frequency property
>     + Link: https://lore.kernel.org/r/20250629205626.68341-3-hansg@kernel.org
>   [PATCH v3 3/15] media: mt9m114: Use aptina-PLL helper to get PLL values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-4-hansg@kernel.org
>   [PATCH v3 4/15] media: mt9m114: Lower minimum vblank value
>     + Link: https://lore.kernel.org/r/20250629205626.68341-5-hansg@kernel.org
>   [PATCH v3 5/15] media: mt9m114: Fix default hblank and vblank values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-6-hansg@kernel.org
>   [PATCH v3 6/15] media: mt9m114: Tweak default hblank and vblank for more accurate fps
>     + Link: https://lore.kernel.org/r/20250629205626.68341-7-hansg@kernel.org
>   [PATCH v3 7/15] media: mt9m114: Avoid a reset low spike during probe()
>     + Link: https://lore.kernel.org/r/20250629205626.68341-8-hansg@kernel.org
>   [PATCH v3 8/15] media: mt9m114: Put sensor in reset on power down
>     + Link: https://lore.kernel.org/r/20250629205626.68341-9-hansg@kernel.org
>   [PATCH v3 9/15] media: mt9m114: Add and use mt9m114_ifp_get_border() helper function
>     + Link: https://lore.kernel.org/r/20250629205626.68341-10-hansg@kernel.org
>   [PATCH v3 10/15] media: mt9m114: Adjust IFP selections and src format when src pixelfmt changes to/from RAW10
>     + Link: https://lore.kernel.org/r/20250629205626.68341-11-hansg@kernel.org
>   [PATCH v3 11/15] media: mt9m114: Update src pad sel and format when sink pad format changes
>     + Link: https://lore.kernel.org/r/20250629205626.68341-12-hansg@kernel.org
>   [PATCH v3 12/15] media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler
>     + Link: https://lore.kernel.org/r/20250629205626.68341-13-hansg@kernel.org
>   [PATCH v3 13/15] media: mt9m114: Drop start-, stop-streaming sequence from initialize
>     + Link: https://lore.kernel.org/r/20250629205626.68341-14-hansg@kernel.org
>   [PATCH v3 14/15] media: mt9m114: Return -EPROBE_DEFER if no endpoint is found
>     + Link: https://lore.kernel.org/r/20250629205626.68341-15-hansg@kernel.org
>   [PATCH v3 15/15] media: mt9m114: Add ACPI enumeration support
>     + Link: https://lore.kernel.org/r/20250629205626.68341-16-hansg@kernel.org
> ---
> Total patches: 15
> ---
> Applying: media: aptina-pll: Debug log p1 min and max values
> Applying: media: mt9m114: Add support for clock-frequency property
> Patch failed at 0002 media: mt9m114: Add support for clock-frequency property
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> error: patch failed: drivers/media/i2c/mt9m114.c:2279
> error: drivers/media/i2c/mt9m114.c: patch does not apply
> hint: Use 'git am --show-current-patch=diff' to see the failed patch
> 
> Trying branch fixes 19272b37aa4f83ca52bdf9c16d5d81bdd1354494...
> Running in OFFLINE mode
> Analyzing 16 messages in the thread
> Checking attestation on all messages, may take a moment...
> ---
>   [PATCH v3 1/15] media: aptina-pll: Debug log p1 min and max values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-2-hansg@kernel.org
>   [PATCH v3 2/15] media: mt9m114: Add support for clock-frequency property
>     + Link: https://lore.kernel.org/r/20250629205626.68341-3-hansg@kernel.org
>   [PATCH v3 3/15] media: mt9m114: Use aptina-PLL helper to get PLL values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-4-hansg@kernel.org
>   [PATCH v3 4/15] media: mt9m114: Lower minimum vblank value
>     + Link: https://lore.kernel.org/r/20250629205626.68341-5-hansg@kernel.org
>   [PATCH v3 5/15] media: mt9m114: Fix default hblank and vblank values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-6-hansg@kernel.org
>   [PATCH v3 6/15] media: mt9m114: Tweak default hblank and vblank for more accurate fps
>     + Link: https://lore.kernel.org/r/20250629205626.68341-7-hansg@kernel.org
>   [PATCH v3 7/15] media: mt9m114: Avoid a reset low spike during probe()
>     + Link: https://lore.kernel.org/r/20250629205626.68341-8-hansg@kernel.org
>   [PATCH v3 8/15] media: mt9m114: Put sensor in reset on power down
>     + Link: https://lore.kernel.org/r/20250629205626.68341-9-hansg@kernel.org
>   [PATCH v3 9/15] media: mt9m114: Add and use mt9m114_ifp_get_border() helper function
>     + Link: https://lore.kernel.org/r/20250629205626.68341-10-hansg@kernel.org
>   [PATCH v3 10/15] media: mt9m114: Adjust IFP selections and src format when src pixelfmt changes to/from RAW10
>     + Link: https://lore.kernel.org/r/20250629205626.68341-11-hansg@kernel.org
>   [PATCH v3 11/15] media: mt9m114: Update src pad sel and format when sink pad format changes
>     + Link: https://lore.kernel.org/r/20250629205626.68341-12-hansg@kernel.org
>   [PATCH v3 12/15] media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler
>     + Link: https://lore.kernel.org/r/20250629205626.68341-13-hansg@kernel.org
>   [PATCH v3 13/15] media: mt9m114: Drop start-, stop-streaming sequence from initialize
>     + Link: https://lore.kernel.org/r/20250629205626.68341-14-hansg@kernel.org
>   [PATCH v3 14/15] media: mt9m114: Return -EPROBE_DEFER if no endpoint is found
>     + Link: https://lore.kernel.org/r/20250629205626.68341-15-hansg@kernel.org
>   [PATCH v3 15/15] media: mt9m114: Add ACPI enumeration support
>     + Link: https://lore.kernel.org/r/20250629205626.68341-16-hansg@kernel.org
> ---
> Total patches: 15
> ---
> Applying: media: aptina-pll: Debug log p1 min and max values
> Applying: media: mt9m114: Add support for clock-frequency property
> Patch failed at 0002 media: mt9m114: Add support for clock-frequency property
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> error: patch failed: drivers/media/i2c/mt9m114.c:2279
> error: drivers/media/i2c/mt9m114.c: patch does not apply
> hint: Use 'git am --show-current-patch=diff' to see the failed patch
> 
> Trying branch None 27b0a9c2a67d483a9d4a941882b779a199ff281e...
> Running in OFFLINE mode
> Analyzing 16 messages in the thread
> Checking attestation on all messages, may take a moment...
> ---
>   [PATCH v3 1/15] media: aptina-pll: Debug log p1 min and max values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-2-hansg@kernel.org
>   [PATCH v3 2/15] media: mt9m114: Add support for clock-frequency property
>     + Link: https://lore.kernel.org/r/20250629205626.68341-3-hansg@kernel.org
>   [PATCH v3 3/15] media: mt9m114: Use aptina-PLL helper to get PLL values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-4-hansg@kernel.org
>   [PATCH v3 4/15] media: mt9m114: Lower minimum vblank value
>     + Link: https://lore.kernel.org/r/20250629205626.68341-5-hansg@kernel.org
>   [PATCH v3 5/15] media: mt9m114: Fix default hblank and vblank values
>     + Link: https://lore.kernel.org/r/20250629205626.68341-6-hansg@kernel.org
>   [PATCH v3 6/15] media: mt9m114: Tweak default hblank and vblank for more accurate fps
>     + Link: https://lore.kernel.org/r/20250629205626.68341-7-hansg@kernel.org
>   [PATCH v3 7/15] media: mt9m114: Avoid a reset low spike during probe()
>     + Link: https://lore.kernel.org/r/20250629205626.68341-8-hansg@kernel.org
>   [PATCH v3 8/15] media: mt9m114: Put sensor in reset on power down
>     + Link: https://lore.kernel.org/r/20250629205626.68341-9-hansg@kernel.org
>   [PATCH v3 9/15] media: mt9m114: Add and use mt9m114_ifp_get_border() helper function
>     + Link: https://lore.kernel.org/r/20250629205626.68341-10-hansg@kernel.org
>   [PATCH v3 10/15] media: mt9m114: Adjust IFP selections and src format when src pixelfmt changes to/from RAW10
>     + Link: https://lore.kernel.org/r/20250629205626.68341-11-hansg@kernel.org
>   [PATCH v3 11/15] media: mt9m114: Update src pad sel and format when sink pad format changes
>     + Link: https://lore.kernel.org/r/20250629205626.68341-12-hansg@kernel.org
>   [PATCH v3 12/15] media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler
>     + Link: https://lore.kernel.org/r/20250629205626.68341-13-hansg@kernel.org
>   [PATCH v3 13/15] media: mt9m114: Drop start-, stop-streaming sequence from initialize
>     + Link: https://lore.kernel.org/r/20250629205626.68341-14-hansg@kernel.org
>   [PATCH v3 14/15] media: mt9m114: Return -EPROBE_DEFER if no endpoint is found
>     + Link: https://lore.kernel.org/r/20250629205626.68341-15-hansg@kernel.org
>   [PATCH v3 15/15] media: mt9m114: Add ACPI enumeration support
>     + Link: https://lore.kernel.org/r/20250629205626.68341-16-hansg@kernel.org
> ---
> Total patches: 15
> ---
> Applying: media: aptina-pll: Debug log p1 min and max values
> Applying: media: mt9m114: Add support for clock-frequency property
> Patch failed at 0002 media: mt9m114: Add support for clock-frequency property
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> error: drivers/media/i2c/mt9m114.c: does not exist in index
> hint: Use 'git am --show-current-patch=diff' to see the failed patch
> 
> 
> 
> Best regards, and Happy Hacking!
> Media CI robot on behalf of the linux-media community.
> 
> ---
> Check the latest rules for contributing your patches at:
> https://docs.kernel.org/driver-api/media/maintainer-entry-profile.html
> 
> If you believe that the CI is wrong, kindly open an issue at
> https://gitlab.freedesktop.org/linux-media/media-ci/-/issues or reply-all
> to this message.
>