From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org, "Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"David Lechner" <dlechner@baylibre.com>
Cc: Denis Ciocca <denis.ciocca@st.com>,
Vasileios Amoiridis <vassilisamir@gmail.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH 7/7] iio: st_sensors: Apply IWYU principles to includes
Date: Thu, 10 Jul 2025 18:11:07 +0100 [thread overview]
Message-ID: <20250710171107.443790-8-jic23@kernel.org> (raw)
In-Reply-To: <20250710171107.443790-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Motivated initially by the new W=1 warning for missing linux/export.h
includes, this is taking a fresh look at what should be included
across the various library and type specific bits of st_sensors.
It approximately follows include what you use principles but with some
fuzzy matching for things like dev_printk.h. If only dev_err()
etc are used in code and device.h does not otherwise need to be included
we only include linux/dev_printk.h. If device.h is needed for other reasons
only include that. That is we assume device.h will continue to
include dev_printk.h.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Note I haven't figure out what official path to PAGE_SIZE is but
the relevant code needs a rewrite anyway so I've left it for now.
drivers/iio/accel/st_accel_buffer.c | 6 ++++--
drivers/iio/accel/st_accel_core.c | 12 +++++++++---
drivers/iio/accel/st_accel_i2c.c | 5 ++++-
drivers/iio/accel/st_accel_spi.c | 3 ++-
.../iio/common/st_sensors/st_sensors_buffer.c | 15 ++++++++++-----
.../iio/common/st_sensors/st_sensors_core.c | 19 +++++++++++++++----
.../iio/common/st_sensors/st_sensors_core.h | 2 ++
.../iio/common/st_sensors/st_sensors_i2c.c | 8 ++++++--
.../iio/common/st_sensors/st_sensors_spi.c | 11 +++++++++--
.../common/st_sensors/st_sensors_trigger.c | 13 ++++++++++---
drivers/iio/gyro/st_gyro_buffer.c | 6 ++++--
drivers/iio/gyro/st_gyro_core.c | 11 ++++++++---
drivers/iio/gyro/st_gyro_i2c.c | 3 ++-
drivers/iio/gyro/st_gyro_spi.c | 3 ++-
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 5 ++++-
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 5 ++---
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 5 ++---
drivers/iio/magnetometer/st_magn_buffer.c | 5 +++--
drivers/iio/magnetometer/st_magn_core.c | 11 ++++++++---
drivers/iio/magnetometer/st_magn_i2c.c | 3 ++-
drivers/iio/magnetometer/st_magn_spi.c | 3 ++-
drivers/iio/pressure/st_pressure_buffer.c | 6 ++++--
drivers/iio/pressure/st_pressure_core.c | 9 ++++++---
drivers/iio/pressure/st_pressure_i2c.c | 3 ++-
drivers/iio/pressure/st_pressure_spi.c | 3 ++-
include/linux/iio/common/st_sensors_i2c.h | 5 ++---
include/linux/iio/common/st_sensors_spi.h | 5 ++---
27 files changed, 128 insertions(+), 57 deletions(-)
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index b2977ae19b69..53ed46db122d 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -7,9 +7,11 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
#include <linux/iio/iio.h>
-#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 99cb661fabb2..c1a44eca4e15 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -7,16 +7,22 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/module.h>
-#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
-#include <linux/acpi.h>
+#include <linux/stddef.h>
+
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
+#include <linux/platform_data/st_sensors_pdata.h>
#include <linux/iio/common/st_sensors.h>
#include "st_accel.h"
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index f24449500533..3f567c63c287 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -7,12 +7,15 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/i2c.h>
+
#include <linux/iio/iio.h>
+#include <linux/iio/common/st_sensors.h>
#include <linux/iio/common/st_sensors_i2c.h>
#include "st_accel.h"
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index d8ec0555f42a..7d9f56df3f75 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -7,7 +7,8 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
index 57f087c2216f..56943bc37592 100644
--- a/drivers/iio/common/st_sensors/st_sensors_buffer.c
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@@ -7,14 +7,19 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/align.h>
+#include <linux/bitmap.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/math.h>
+#include <linux/irqreturn.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-#include <linux/interrupt.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
-#include <linux/irqreturn.h>
-#include <linux/regmap.h>
#include <linux/iio/common/st_sensors.h>
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 8ce1dccfea4f..ab6e38f1f23a 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -7,16 +7,27 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
+#include <linux/array_size.h>
+#include <linux/bitops.h>
#include <linux/delay.h>
-#include <linux/iio/iio.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/math.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sprintf.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
#include <linux/unaligned.h>
+
+#include <linux/iio/iio.h>
+
+#include <linux/platform_data/st_sensors_pdata.h>
#include <linux/iio/common/st_sensors.h>
#include "st_sensors_core.h"
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.h b/drivers/iio/common/st_sensors/st_sensors_core.h
index 09f3e602a2e2..efd7cc1a97ed 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.h
+++ b/drivers/iio/common/st_sensors/st_sensors_core.h
@@ -4,6 +4,8 @@
*/
#ifndef __ST_SENSORS_CORE_H
#define __ST_SENSORS_CORE_H
+#include <linux/types.h>
+
struct iio_dev;
int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
u8 reg_addr, u8 mask, u8 data);
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
index 7156302fe997..e524845e4e09 100644
--- a/drivers/iio/common/st_sensors/st_sensors_i2c.c
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -7,12 +7,16 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/export.h>
#include <linux/i2c.h>
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/iio/iio.h>
#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
#include <linux/iio/common/st_sensors_i2c.h>
#define ST_SENSORS_I2C_MULTIREAD 0x80
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
index 0da27013943d..8310e235c019 100644
--- a/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -7,13 +7,20 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
#include <linux/module.h>
-#include <linux/iio/iio.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#include <linux/iio/iio.h>
+#include <linux/platform_data/st_sensors_pdata.h>
+#include <linux/iio/common/st_sensors.h>
#include <linux/iio/common/st_sensors_spi.h>
#define ST_SENSORS_SPI_MULTIREAD 0xc0
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 9d4bf822a15d..9746e5a30de0 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -7,11 +7,18 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/regmap.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
#include <linux/iio/common/st_sensors.h>
#include "st_sensors_core.h"
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
index 1ebfe7aa6c96..cb78552e17a1 100644
--- a/drivers/iio/gyro/st_gyro_buffer.c
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -7,9 +7,11 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
#include <linux/iio/iio.h>
-#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 7fd82cd707c7..ac6b35fb7aac 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -7,15 +7,20 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
+#include <linux/stddef.h>
#include <linux/sysfs.h>
+
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
+#include <linux/platform_data/st_sensors_pdata.h>
#include <linux/iio/common/st_sensors.h>
#include "st_gyro.h"
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index aef5ec8f9dee..d699518a18ab 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -7,7 +7,8 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/i2c.h>
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index f645da157372..61c03b72b57e 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -7,7 +7,8 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
index 8f4a67edb335..8af4ab21bd22 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
@@ -8,7 +8,8 @@
*/
#include <linux/array_size.h>
-#include <linux/dev_printk.h>
+#include <linux/device.h>
+#include <linux/export.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
@@ -18,6 +19,8 @@
#include "st_lsm9ds0.h"
+struct regmap;
+
static int st_lsm9ds0_probe_accel(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap)
{
const struct st_sensor_settings *settings;
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
index 4232a9d800fc..0eb0564801cb 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
@@ -7,15 +7,14 @@
* Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
*/
-#include <linux/device/devres.h>
+#include <linux/device.h>
#include <linux/err.h>
-#include <linux/gfp_types.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/regmap.h>
-#include <linux/iio/common/st_sensors_i2c.h>
+#include <linux/iio/common/st_sensors.h>
#include "st_lsm9ds0.h"
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
index acea8a0757d7..b72ad380aa2f 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
@@ -7,15 +7,14 @@
* Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
*/
-#include <linux/device/devres.h>
+#include <linux/device.h>
#include <linux/err.h>
-#include <linux/gfp_types.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
-#include <linux/iio/common/st_sensors_spi.h>
+#include <linux/iio/common/st_sensors.h>
#include "st_lsm9ds0.h"
diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c
index 79987f42e8d9..91f4b077a554 100644
--- a/drivers/iio/magnetometer/st_magn_buffer.c
+++ b/drivers/iio/magnetometer/st_magn_buffer.c
@@ -6,10 +6,11 @@
*
* Denis Ciocca <denis.ciocca@st.com>
*/
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
-#include <linux/kernel.h>
#include <linux/iio/iio.h>
-#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index ef348d316c00..7508a7cf74d4 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -6,15 +6,20 @@
*
* Denis Ciocca <denis.ciocca@st.com>
*/
-
-#include <linux/kernel.h>
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/module.h>
-#include <linux/mutex.h>
+#include <linux/stddef.h>
#include <linux/sysfs.h>
+
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
+#include <linux/platform_data/st_sensors_pdata.h>
#include <linux/iio/common/st_sensors.h>
#include "st_magn.h"
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index ed70e782af5e..e58fec268be1 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -7,7 +7,8 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/i2c.h>
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index 68816362bb95..2a6b0715bb85 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -7,7 +7,8 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
index 0dbf357c2c22..b83eb7bad11a 100644
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@@ -7,9 +7,11 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
#include <linux/iio/iio.h>
-#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index b70d1cee82f3..cb5cca094ca9 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -7,14 +7,17 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/module.h>
-#include <linux/mutex.h>
+#include <linux/stddef.h>
#include <linux/sysfs.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
-#include <linux/unaligned.h>
#include <linux/iio/common/st_sensors.h>
#include "st_pressure.h"
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 0f50bac1fb4d..c6ace6ec6e81 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -7,7 +7,8 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/i2c.h>
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 39827e6841ca..9df0b94f9ccf 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -7,7 +7,8 @@
* Denis Ciocca <denis.ciocca@st.com>
*/
-#include <linux/kernel.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
diff --git a/include/linux/iio/common/st_sensors_i2c.h b/include/linux/iio/common/st_sensors_i2c.h
index 5f15cf01036c..e9d9a477ef67 100644
--- a/include/linux/iio/common/st_sensors_i2c.h
+++ b/include/linux/iio/common/st_sensors_i2c.h
@@ -10,9 +10,8 @@
#ifndef ST_SENSORS_I2C_H
#define ST_SENSORS_I2C_H
-#include <linux/i2c.h>
-#include <linux/iio/common/st_sensors.h>
-
+struct iio_dev;
+struct i2c_client;
int st_sensors_i2c_configure(struct iio_dev *indio_dev,
struct i2c_client *client);
diff --git a/include/linux/iio/common/st_sensors_spi.h b/include/linux/iio/common/st_sensors_spi.h
index 90b25f087f06..0bd341330b80 100644
--- a/include/linux/iio/common/st_sensors_spi.h
+++ b/include/linux/iio/common/st_sensors_spi.h
@@ -10,9 +10,8 @@
#ifndef ST_SENSORS_SPI_H
#define ST_SENSORS_SPI_H
-#include <linux/spi/spi.h>
-#include <linux/iio/common/st_sensors.h>
-
+struct iio_dev;
+struct spi_device;
int st_sensors_spi_configure(struct iio_dev *indio_dev,
struct spi_device *spi);
--
2.50.0
next prev parent reply other threads:[~2025-07-10 17:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-10 17:11 [PATCH 0/7] IIO: More application of IWYU principles to includes Jonathan Cameron
2025-07-10 17:11 ` [PATCH 1/7] iio: pressure: bmp280: Apply iwyu " Jonathan Cameron
2025-07-10 19:09 ` Andy Shevchenko
2025-07-10 17:11 ` [PATCH 2/7] iio: pressure: zpa2326: " Jonathan Cameron
2025-07-10 17:11 ` [PATCH 3/7] iio: pressure: mpl115: " Jonathan Cameron
2025-07-10 17:11 ` [PATCH 4/7] iio: pressure: ms5611: " Jonathan Cameron
2025-07-10 17:11 ` [PATCH 5/7] iio: pressure: hsc030pa: Apply IWYU " Jonathan Cameron
2025-07-10 17:11 ` [PATCH 6/7] iio: pressure: mprls0025pa: " Jonathan Cameron
2025-07-10 17:11 ` Jonathan Cameron [this message]
2025-07-10 19:09 ` [PATCH 0/7] IIO: More application of " Andy Shevchenko
2025-07-10 19:28 ` David Lechner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250710171107.443790-8-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=andy@kernel.org \
--cc=denis.ciocca@st.com \
--cc=dlechner@baylibre.com \
--cc=linux-iio@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=vassilisamir@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.