FAILED: patch "[PATCH] ASoC: fsl_sai: Force a software reset when starting in" failed to apply to 6.6-stable tree

FAILED: patch "[PATCH] ASoC: fsl_sai: Force a software reset when starting in" failed to apply to 6.6-stable tree

[gregkh]

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x dc78f7e59169d3f0e6c3c95d23dc8e55e95741e2
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025071256-clobber-annotate-b978@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From dc78f7e59169d3f0e6c3c95d23dc8e55e95741e2 Mon Sep 17 00:00:00 2001
From: Arun Raghavan <arun@asymptotic.io>
Date: Thu, 26 Jun 2025 09:08:25 -0400
Subject: [PATCH] ASoC: fsl_sai: Force a software reset when starting in
 consumer mode

On an imx8mm platform with an external clock provider, when running the
receiver (arecord) and triggering an xrun with xrun_injection, we see a
channel swap/offset. This happens sometimes when running only the
receiver, but occurs reliably if a transmitter (aplay) is also
concurrently running.

It seems that the SAI loses track of frame sync during the trigger stop
-> trigger start cycle that occurs during an xrun. Doing just a FIFO
reset in this case does not suffice, and only a software reset seems to
get it back on track.

This looks like the same h/w bug that is already handled for the
producer case, so we now do the reset unconditionally on config disable.

Signed-off-by: Arun Raghavan <arun@asymptotic.io>
Reported-by: Pieterjan Camerlynck <p.camerlynck@televic.com>
Fixes: 3e3f8bd56955 ("ASoC: fsl_sai: fix no frame clk in master mode")
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index af1a168d35e3..50af6b725670 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -803,13 +803,15 @@ static void fsl_sai_config_disable(struct fsl_sai *sai, int dir)
 	 * anymore. Add software reset to fix this issue.
 	 * This is a hardware bug, and will be fix in the
 	 * next sai version.
+	 *
+	 * In consumer mode, this can happen even after a
+	 * single open/close, especially if both tx and rx
+	 * are running concurrently.
 	 */
-	if (!sai->is_consumer_mode[tx]) {
-		/* Software Reset */
-		regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR);
-		/* Clear SR bit to finish the reset */
-		regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0);
-	}
+	/* Software Reset */
+	regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR);
+	/* Clear SR bit to finish the reset */
+	regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0);
 }
 
 static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,

[PATCH 6.6.y] ASoC: fsl_sai: Force a software reset when starting in consumer mode

[Arun Raghavan]

From: Arun Raghavan <arun@asymptotic.io>

commit dc78f7e59169d3f0e6c3c95d23dc8e55e95741e2 upstream.

On an imx8mm platform with an external clock provider, when running the
receiver (arecord) and triggering an xrun with xrun_injection, we see a
channel swap/offset. This happens sometimes when running only the
receiver, but occurs reliably if a transmitter (aplay) is also
concurrently running.

It seems that the SAI loses track of frame sync during the trigger stop
-> trigger start cycle that occurs during an xrun. Doing just a FIFO
reset in this case does not suffice, and only a software reset seems to
get it back on track.

This looks like the same h/w bug that is already handled for the
producer case, so we now do the reset unconditionally on config disable.

Signed-off-by: Arun Raghavan <arun@asymptotic.io>
Reported-by: Pieterjan Camerlynck <p.camerlynck@televic.com>
Fixes: 3e3f8bd56955 ("ASoC: fsl_sai: fix no frame clk in master mode")
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/fsl/fsl_sai.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index aa15f56ca139..886f5c29939b 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -762,13 +762,15 @@ static void fsl_sai_config_disable(struct fsl_sai *sai, int dir)
 	 * anymore. Add software reset to fix this issue.
 	 * This is a hardware bug, and will be fix in the
 	 * next sai version.
+	 *
+	 * In consumer mode, this can happen even after a
+	 * single open/close, especially if both tx and rx
+	 * are running concurrently.
 	 */
-	if (!sai->is_consumer_mode) {
-		/* Software Reset */
-		regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR);
-		/* Clear SR bit to finish the reset */
-		regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0);
-	}
+	/* Software Reset */
+	regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR);
+	/* Clear SR bit to finish the reset */
+	regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0);
 }
 
 static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
-- 
2.50.1