All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 0/2] reset: bcm6345: add support for internal ephy resets on bcm63xx
@ 2025-07-15 23:46 Kyle Hendry
  2025-07-15 23:46 ` [PATCH v2 1/2] reset: bcm6345: add support for bcm63xx ephy control register Kyle Hendry
  2025-07-15 23:46 ` [PATCH v2 2/2] dt-bindings: reset: add compatible for bcm63xx ephy control Kyle Hendry
  0 siblings, 2 replies; 3+ messages in thread
From: Kyle Hendry @ 2025-07-15 23:46 UTC (permalink / raw)
  To: Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Fernández Rojas
  Cc: Kyle Hendry, devicetree, linux-kernel

bcm63xx SoCs have a register in the gpio controller that controls some
of the phy functionality. Some of the bits reset individual phys and 
need a driver to set. 

The other fields in the register configure phy power and will be set
by the network device driver. 

v2:
- Drop SoC specific patches since bits are sequential

v1: https://lore.kernel.org/all/20250709024740.194520-1-kylehendrydev@gmail.com/

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>

Kyle Hendry (2):
  reset: bcm6345: add support for bcm63xx ephy control register
  dt-bindings: reset: add compatible for bcm63xx ephy control

 .../devicetree/bindings/reset/brcm,bcm6345-reset.yaml         | 4 +++-
 drivers/reset/reset-bcm6345.c                                 | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

-- 
2.43.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2025-07-15 23:46 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-07-15 23:46 [PATCH v2 0/2] reset: bcm6345: add support for internal ephy resets on bcm63xx Kyle Hendry
2025-07-15 23:46 ` [PATCH v2 1/2] reset: bcm6345: add support for bcm63xx ephy control register Kyle Hendry
2025-07-15 23:46 ` [PATCH v2 2/2] dt-bindings: reset: add compatible for bcm63xx ephy control Kyle Hendry

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.