* FAILED: patch "[PATCH] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event" failed to apply to 5.10-stable tree
@ 2025-08-12 15:21 gregkh
2025-08-13 13:44 ` [PATCH 5.10.y] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: gregkh @ 2025-08-12 15:21 UTC (permalink / raw)
To: john.ernberg, kuba; +Cc: stable
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025081258-value-bobbing-e1b7@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f Mon Sep 17 00:00:00 2001
From: John Ernberg <john.ernberg@actia.se>
Date: Wed, 23 Jul 2025 10:25:35 +0000
Subject: [PATCH] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff00 ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index c04e715a4c2a..bc1d8631ffe0 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1122,6 +1122,9 @@ static void __handle_link_change(struct usbnet *dev)
* tx queue is stopped by netcore after link becomes off
*/
} else {
+ if (test_and_clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags))
+ netif_carrier_on(dev->net);
+
/* submitting URBs for reading packets */
tasklet_schedule(&dev->bh);
}
@@ -2009,10 +2012,12 @@ EXPORT_SYMBOL(usbnet_manage_power);
void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset)
{
/* update link after link is reseted */
- if (link && !need_reset)
- netif_carrier_on(dev->net);
- else
+ if (link && !need_reset) {
+ set_bit(EVENT_LINK_CARRIER_ON, &dev->flags);
+ } else {
+ clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags);
netif_carrier_off(dev->net);
+ }
if (need_reset && link)
usbnet_defer_kevent(dev, EVENT_LINK_RESET);
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 0b9f1e598e3a..4bc6bb01a0eb 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -76,6 +76,7 @@ struct usbnet {
# define EVENT_LINK_CHANGE 11
# define EVENT_SET_RX_MODE 12
# define EVENT_NO_IP_ALIGN 13
+# define EVENT_LINK_CARRIER_ON 14
/* This one is special, as it indicates that the device is going away
* there are cyclic dependencies between tasklet, timer and bh
* that must be broken
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH 5.10.y] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event
2025-08-12 15:21 FAILED: patch "[PATCH] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event" failed to apply to 5.10-stable tree gregkh
@ 2025-08-13 13:44 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2025-08-13 13:44 UTC (permalink / raw)
To: stable; +Cc: John Ernberg, Jakub Kicinski, Sasha Levin
From: John Ernberg <john.ernberg@actia.se>
[ Upstream commit 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f ]
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff00 ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ adjust context in header ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/usb/usbnet.c | 11 ++++++++---
include/linux/usb/usbnet.h | 1 +
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index ad425e09c75f..22d6ec405175 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1080,6 +1080,9 @@ static void __handle_link_change(struct usbnet *dev)
* tx queue is stopped by netcore after link becomes off
*/
} else {
+ if (test_and_clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags))
+ netif_carrier_on(dev->net);
+
/* submitting URBs for reading packets */
tasklet_schedule(&dev->bh);
}
@@ -1960,10 +1963,12 @@ EXPORT_SYMBOL(usbnet_manage_power);
void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset)
{
/* update link after link is reseted */
- if (link && !need_reset)
- netif_carrier_on(dev->net);
- else
+ if (link && !need_reset) {
+ set_bit(EVENT_LINK_CARRIER_ON, &dev->flags);
+ } else {
+ clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags);
netif_carrier_off(dev->net);
+ }
if (need_reset && link)
usbnet_defer_kevent(dev, EVENT_LINK_RESET);
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 8110c29fab42..6aaef1a3e16c 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -83,6 +83,7 @@ struct usbnet {
# define EVENT_LINK_CHANGE 11
# define EVENT_SET_RX_MODE 12
# define EVENT_NO_IP_ALIGN 13
+# define EVENT_LINK_CARRIER_ON 14
u32 rx_speed; /* in bps - NOT Mbps */
u32 tx_speed; /* in bps - NOT Mbps */
};
--
2.39.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-08-13 13:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-08-12 15:21 FAILED: patch "[PATCH] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event" failed to apply to 5.10-stable tree gregkh
2025-08-13 13:44 ` [PATCH 5.10.y] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event Sasha Levin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.