From: kernel test robot <lkp@intel.com>
To: oe-kbuild@lists.linux.dev
Cc: lkp@intel.com
Subject: Re: [PATCH 3/6] arm64: dts: broadcom: bcm2712: Add pin controller nodes
Date: Wed, 13 Aug 2025 10:35:07 +0800 [thread overview]
Message-ID: <202508130908.mmjdJJFQ-lkp@intel.com> (raw)
::::::
:::::: Manual check reason: "dtcheck: binding changes may go via different trees"
::::::
BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
In-Reply-To: <df99c6a2eeac4bed76bcc6bd74e44a061963256e.1754924348.git.andrea.porta@suse.com>
References: <df99c6a2eeac4bed76bcc6bd74e44a061963256e.1754924348.git.andrea.porta@suse.com>
TO: Andrea della Porta <andrea.porta@suse.com>
TO: linus.walleij@linaro.org
TO: robh@kernel.org
TO: krzk+dt@kernel.org
TO: conor+dt@kernel.org
TO: florian.fainelli@broadcom.com
TO: wahrenst@gmx.net
TO: linux-gpio@vger.kernel.org
TO: devicetree@vger.kernel.org
TO: linux-arm-kernel@lists.infradead.org
TO: Catalin Marinas <catalin.marinas@arm.com>
TO: Will Deacon <will@kernel.org>
TO: iivanov@suse.de
TO: svarbanov@suse.de
TO: mbrugger@suse.com
TO: Jonathan Bell <jonathan@raspberrypi.com>
TO: Phil Elwell <phil@raspberrypi.com>
TO: Ulf Hansson <ulf.hansson@linaro.org>
TO: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
TO: Al Cooper <alcooperx@gmail.com>
TO: linux-mmc@vger.kernel.org
TO: Jiri Slaby <jirislaby@kernel.org>
TO: linux-serial@vger.kernel.org
CC: Andrea della Porta <andrea.porta@suse.com>
Hi Andrea,
kernel test robot noticed the following build warnings:
[auto build test WARNING on robh/for-next]
[also build test WARNING on tty/tty-testing tty/tty-next tty/tty-linus rockchip/for-next linus/master v6.17-rc1 next-20250812]
[cannot apply to arm/for-next arm/fixes arm64/for-next/core kvmarm/next shawnguo/for-next soc/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Andrea-della-Porta/dt-bindings-mmc-Add-support-for-capabilities-to-Broadcom-SDHCI-controller/20250811-232101
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link: https://lore.kernel.org/r/df99c6a2eeac4bed76bcc6bd74e44a061963256e.1754924348.git.andrea.porta%40suse.com
patch subject: [PATCH 3/6] arm64: dts: broadcom: bcm2712: Add pin controller nodes
:::::: branch date: 35 hours ago
:::::: commit date: 35 hours ago
config: arm64-randconfig-051-20250812 (https://download.01.org/0day-ci/archive/20250813/202508130908.mmjdJJFQ-lkp@intel.com/config)
compiler: clang version 22.0.0git (https://github.com/llvm/llvm-project 3769ce013be2879bf0b329c14a16f5cb766f26ce)
dtschema version: 2025.6.2.dev4+g8f79ddd
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250813/202508130908.mmjdJJFQ-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202508130908.mmjdJJFQ-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:504.4-507.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:504.4-507.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: soc@107c000000 (simple-bus): firmware: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: soc@107c000000 (simple-bus): power: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc@107c000000/pinctrl@7d504100: failed to match any schema with compatible: ['brcm,bcm2712c0-pinctrl']
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc@107c000000/pinctrl@7d510700: failed to match any schema with compatible: ['brcm,bcm2712c0-aon-pinctrl']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names:3: 'wakeup' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names:4: 'hpd-connected' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names: ['cec-tx', 'cec-rx', 'cec-low', 'hpd-connected', 'hpd-removed'] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupts: [[1], [2], [3], [7], [8]] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names:3: 'wakeup' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
--
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:504.4-507.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:504.4-507.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: soc@107c000000 (simple-bus): power: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: soc@107c000000 (simple-bus): firmware: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: /soc@107c000000/pinctrl@7d504100: failed to match any schema with compatible: ['brcm,bcm2712c0-pinctrl']
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: /soc@107c000000/pinctrl@7d510700: failed to match any schema with compatible: ['brcm,bcm2712c0-aon-pinctrl']
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names:3: 'wakeup' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names:4: 'hpd-connected' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names: ['cec-tx', 'cec-rx', 'cec-low', 'hpd-connected', 'hpd-removed'] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupts: [[1], [2], [3], [7], [8]] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names:3: 'wakeup' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
--
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:504.4-507.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:504.4-507.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:543.4-546.31: Warning (interrupt_map): /axi/pcie@1000120000:interrupt-map: Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: soc@107c000000 (simple-bus): firmware: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: soc@107c000000 (simple-bus): power: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: /soc@107c000000/pinctrl@7d504100: failed to match any schema with compatible: ['brcm,bcm2712c0-pinctrl']
>> arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: /soc@107c000000/pinctrl@7d510700: failed to match any schema with compatible: ['brcm,bcm2712c0-aon-pinctrl']
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names:3: 'wakeup' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names:4: 'hpd-connected' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names: ['cec-tx', 'cec-rx', 'cec-low', 'hpd-connected', 'hpd-removed'] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupts: [[1], [2], [3], [7], [8]] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names:3: 'wakeup' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next reply other threads:[~2025-08-13 2:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-13 2:35 kernel test robot [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-08-11 15:19 [PATCH 0/6] Add peripheral nodes to RaspberryPi 5 DT Andrea della Porta
2025-08-11 15:19 ` [PATCH 3/6] arm64: dts: broadcom: bcm2712: Add pin controller nodes Andrea della Porta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202508130908.mmjdJJFQ-lkp@intel.com \
--to=lkp@intel.com \
--cc=oe-kbuild@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.