[PATCH net v3 1/2] net: ethernet: mtk_ppe: add RCU lock around dev_fill_forward_path

[PATCH net v3 1/2] net: ethernet: mtk_ppe: add RCU lock around dev_fill_forward_path

[Qingfang Deng]

Ensure ndo_fill_forward_path() is called with RCU lock held.

Fixes: 2830e314778d ("net: ethernet: mtk-ppe: fix traffic offload with bridged wlan")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
---
v3:
 Reorder the patch to be first.
v2:
 New patch
 drivers/net/ethernet/mediatek/mtk_ppe_offload.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
index c855fb799ce1..e9bd32741983 100644
--- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
@@ -101,7 +101,9 @@ mtk_flow_get_wdma_info(struct net_device *dev, const u8 *addr, struct mtk_wdma_i
 	if (!IS_ENABLED(CONFIG_NET_MEDIATEK_SOC_WED))
 		return -1;
 
+	rcu_read_lock();
 	err = dev_fill_forward_path(dev, addr, &stack);
+	rcu_read_unlock();
 	if (err)
 		return err;
 
-- 
2.43.0

[PATCH net v3 2/2] ppp: fix race conditions in ppp_fill_forward_path

[Qingfang Deng]

ppp_fill_forward_path() has two race conditions:

1. The ppp->channels list can change between list_empty() and
   list_first_entry(), as ppp_lock() is not held. If the only channel
   is deleted in ppp_disconnect_channel(), list_first_entry() may
   access an empty head or a freed entry, and trigger a panic.

2. pch->chan can be NULL. When ppp_unregister_channel() is called,
   pch->chan is set to NULL before pch is removed from ppp->channels.

Fix these by using a lockless RCU approach:
- Use list_first_or_null_rcu() to safely test and access the first list
  entry.
- Convert list modifications on ppp->channels to their RCU variants and
  add synchronize_net() after removal.
- Check for a NULL pch->chan before dereferencing it.

Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
---
v3:
 Reorder the patch to be after the mtk_ppe patch.
v2:
 Use synchronize_net() instead of synchronize_rcu().
 Use READ_ONCE() to access pch->chan, and WRITE_ONCE() to set it to NULL.

 drivers/net/ppp/ppp_generic.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 8c98cbd4b06d..824c8dc4120b 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -33,6 +33,7 @@
 #include <linux/ppp_channel.h>
 #include <linux/ppp-comp.h>
 #include <linux/skbuff.h>
+#include <linux/rculist.h>
 #include <linux/rtnetlink.h>
 #include <linux/if_arp.h>
 #include <linux/ip.h>
@@ -1598,11 +1599,14 @@ static int ppp_fill_forward_path(struct net_device_path_ctx *ctx,
 	if (ppp->flags & SC_MULTILINK)
 		return -EOPNOTSUPP;
 
-	if (list_empty(&ppp->channels))
+	pch = list_first_or_null_rcu(&ppp->channels, struct channel, clist);
+	if (!pch)
+		return -ENODEV;
+
+	chan = READ_ONCE(pch->chan);
+	if (!chan)
 		return -ENODEV;
 
-	pch = list_first_entry(&ppp->channels, struct channel, clist);
-	chan = pch->chan;
 	if (!chan->ops->fill_forward_path)
 		return -EOPNOTSUPP;
 
@@ -2994,7 +2998,7 @@ ppp_unregister_channel(struct ppp_channel *chan)
 	 */
 	down_write(&pch->chan_sem);
 	spin_lock_bh(&pch->downl);
-	pch->chan = NULL;
+	WRITE_ONCE(pch->chan, NULL);
 	spin_unlock_bh(&pch->downl);
 	up_write(&pch->chan_sem);
 	ppp_disconnect_channel(pch);
@@ -3515,7 +3519,7 @@ ppp_connect_channel(struct channel *pch, int unit)
 	hdrlen = pch->file.hdrlen + 2;	/* for protocol bytes */
 	if (hdrlen > ppp->dev->hard_header_len)
 		ppp->dev->hard_header_len = hdrlen;
-	list_add_tail(&pch->clist, &ppp->channels);
+	list_add_tail_rcu(&pch->clist, &ppp->channels);
 	++ppp->n_channels;
 	pch->ppp = ppp;
 	refcount_inc(&ppp->file.refcnt);
@@ -3545,10 +3549,11 @@ ppp_disconnect_channel(struct channel *pch)
 	if (ppp) {
 		/* remove it from the ppp unit's list */
 		ppp_lock(ppp);
-		list_del(&pch->clist);
+		list_del_rcu(&pch->clist);
 		if (--ppp->n_channels == 0)
 			wake_up_interruptible(&ppp->file.rwait);
 		ppp_unlock(ppp);
+		synchronize_net();
 		if (refcount_dec_and_test(&ppp->file.refcnt))
 			ppp_destroy_interface(ppp);
 		err = 0;
-- 
2.43.0

Re: [PATCH net v3 1/2] net: ethernet: mtk_ppe: add RCU lock around dev_fill_forward_path

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (main)
by Paolo Abeni <pabeni@redhat.com>:

On Thu, 14 Aug 2025 09:25:57 +0800 you wrote:
> Ensure ndo_fill_forward_path() is called with RCU lock held.
> 
> Fixes: 2830e314778d ("net: ethernet: mtk-ppe: fix traffic offload with bridged wlan")
> Signed-off-by: Qingfang Deng <dqfext@gmail.com>
> ---
> v3:
>  Reorder the patch to be first.
> v2:
>  New patch
>  drivers/net/ethernet/mediatek/mtk_ppe_offload.c | 2 ++
>  1 file changed, 2 insertions(+)

Here is the summary with links:
  - [net,v3,1/2] net: ethernet: mtk_ppe: add RCU lock around dev_fill_forward_path
    https://git.kernel.org/netdev/net/c/62c30c544359
  - [net,v3,2/2] ppp: fix race conditions in ppp_fill_forward_path
    https://git.kernel.org/netdev/net/c/0417adf367a0

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html