[PATCH v2 10/10] scsi: pm80xx: Use pm80xx_get_local_phy_id() to access phy array

[Niklas Cassel <cassel@kernel.org>]

While the current code is perfectly fine (because we verify that the
device is directly attached before using attached_phy to index the
pm8001_ha->phy array), let's use the pm80xx_get_local_phy_id() helper
anyway, to reduce the chance that someone will copy paste this pattern to
other parts of the driver.

Note that in this specific case, we still need to keep the check that the
device is not behind an expander, because we do not want to clear
attached_phy of the expander if a device behind the expander disappears
(as that would disable all the other devices behind the expander).

However, if it is the expander itself that disappears, attached_phy will
be cleared, just like it would for any other directly attached device.

Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
 drivers/scsi/pm8001/pm8001_sas.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index c5354263b45e..6a8d35aea93a 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -780,8 +780,11 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
 		 * The phy array only contains local phys. Thus, we cannot clear
 		 * phy_attached for a device behind an expander.
 		 */
-		if (!dev_parent_is_expander(dev))
-			pm8001_ha->phy[pm8001_dev->attached_phy].phy_attached = 0;
+		if (!dev_parent_is_expander(dev)) {
+			u32 phy_id = pm80xx_get_local_phy_id(dev);
+
+			pm8001_ha->phy[phy_id].phy_attached = 0;
+		}
 		pm8001_free_dev(pm8001_dev);
 	} else {
 		pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n");
-- 
2.50.1