* [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system
@ 2025-08-15 19:47 Eddie James
2025-08-15 19:47 ` [PATCH v4 1/4] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
` (4 more replies)
0 siblings, 5 replies; 11+ messages in thread
From: Eddie James @ 2025-08-15 19:47 UTC (permalink / raw)
To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames
The Balcones system is similar to Bonnell but with a POWER11 processor.
Changes since v3:
- Add max31785 to the max31790 document instead of to trivial-devices
- Fix minor formatting in dps310 document
Changes since v2:
- Fix a couple of incorrect i2c addresses
- Document dps310 and max31785 properly
- Drop the UCD binding documentation update, it's been fixed
Changes since v1:
- Add all the ucd9000 driver supported compatible strings
- Fix node ordering in Balcones device tree
- Improve commit message to explain addition of ibm-power11-dual.dtsi
Eddie James (4):
dt-bindings: arm: aspeed: add IBM Balcones board
dt-bindings: iio: Add Infineon DPS310 sensor documentation
dt-bindings: hwmon: Move max31785 compatibles to max31790 document
ARM: dts: aspeed: Add Balcones system
.../bindings/arm/aspeed/aspeed.yaml | 1 +
.../devicetree/bindings/hwmon/max31785.txt | 22 -
.../bindings/hwmon/maxim,max31790.yaml | 6 +-
.../iio/pressure/infineon,dps310.yaml | 44 +
.../devicetree/bindings/trivial-devices.yaml | 2 -
MAINTAINERS | 1 +
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++
.../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++
.../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +----------------
10 files changed, 1442 insertions(+), 792 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt
create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
--
2.50.1
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v4 1/4] dt-bindings: arm: aspeed: add IBM Balcones board 2025-08-15 19:47 [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system Eddie James @ 2025-08-15 19:47 ` Eddie James 2025-08-16 0:14 ` Rob Herring 2025-08-15 19:47 ` [PATCH v4 2/4] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James ` (3 subsequent siblings) 4 siblings, 1 reply; 11+ messages in thread From: Eddie James @ 2025-08-15 19:47 UTC (permalink / raw) To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames Document a new AST2600 BMC board for IBM P11 server. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index b3c9d3310d57..1283ef1a3520 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -92,6 +92,7 @@ properties: - facebook,minerva-cmc - facebook,santabarbara-bmc - facebook,yosemite4-bmc + - ibm,balcones-bmc - ibm,blueridge-bmc - ibm,everest-bmc - ibm,fuji-bmc -- 2.50.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v4 1/4] dt-bindings: arm: aspeed: add IBM Balcones board 2025-08-15 19:47 ` [PATCH v4 1/4] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James @ 2025-08-16 0:14 ` Rob Herring 0 siblings, 0 replies; 11+ messages in thread From: Rob Herring @ 2025-08-16 0:14 UTC (permalink / raw) To: Eddie James; +Cc: linux-aspeed, devicetree, andrew, conor+dt, krzk+dt On Fri, Aug 15, 2025 at 2:47 PM Eddie James <eajames@linux.ibm.com> wrote: > > Document a new AST2600 BMC board for IBM P11 server. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > --- > Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + > 1 file changed, 1 insertion(+) Reviewed-by: Rob Herring (Arm) <robh@kernel.org> ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v4 2/4] dt-bindings: iio: Add Infineon DPS310 sensor documentation 2025-08-15 19:47 [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system Eddie James 2025-08-15 19:47 ` [PATCH v4 1/4] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James @ 2025-08-15 19:47 ` Eddie James 2025-08-15 19:47 ` [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James ` (2 subsequent siblings) 4 siblings, 0 replies; 11+ messages in thread From: Eddie James @ 2025-08-15 19:47 UTC (permalink / raw) To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames The DPS310 is a barometric pressure and temperature sensor with an I2C interface. Remove it from trivial-devices.yaml and add its own documentation. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> --- .../iio/pressure/infineon,dps310.yaml | 44 +++++++++++++++++++ .../devicetree/bindings/trivial-devices.yaml | 2 - MAINTAINERS | 1 + 3 files changed, 45 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml new file mode 100644 index 000000000000..7c0782e2a821 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon DPS310 barometric pressure and temperature sensor + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: + The DPS310 is a barometric pressure and temperature sensor with an I2C + interface. + +properties: + compatible: + enum: + - infineon,dps310 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index f3dd18681aa6..3f2c5b815d0d 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -127,8 +127,6 @@ properties: - ibm,cffps2 # IBM On-Chip Controller hwmon device - ibm,p8-occ-hwmon - # Infineon barometric pressure and temperature sensor - - infineon,dps310 # Infineon IR36021 digital POL buck controller - infineon,ir36021 # Infineon IRPS5401 Voltage Regulator (PMIC) diff --git a/MAINTAINERS b/MAINTAINERS index 5eeeef7bf255..538fab167141 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12033,6 +12033,7 @@ INFINEON DPS310 Driver M: Eddie James <eajames@linux.ibm.com> L: linux-iio@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml F: drivers/iio/pressure/dps310.c INFINEON PEB2466 ASoC CODEC -- 2.50.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document 2025-08-15 19:47 [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system Eddie James 2025-08-15 19:47 ` [PATCH v4 1/4] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James 2025-08-15 19:47 ` [PATCH v4 2/4] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James @ 2025-08-15 19:47 ` Eddie James 2025-08-16 0:13 ` Rob Herring 2025-08-15 19:47 ` [PATCH v4 4/4] ARM: dts: aspeed: Add Balcones system Eddie James 2025-08-15 23:38 ` [PATCH v4 0/4] " Rob Herring (Arm) 4 siblings, 1 reply; 11+ messages in thread From: Eddie James @ 2025-08-15 19:47 UTC (permalink / raw) To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames The binding for the max31785 is the same as the max31790, so just add some compatible strings for the max31785 chip. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- .../devicetree/bindings/hwmon/max31785.txt | 22 ------------------- .../bindings/hwmon/maxim,max31790.yaml | 6 ++++- 2 files changed, 5 insertions(+), 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt deleted file mode 100644 index 106e08c56aaa..000000000000 --- a/Documentation/devicetree/bindings/hwmon/max31785.txt +++ /dev/null @@ -1,22 +0,0 @@ -Bindings for the Maxim MAX31785 Intelligent Fan Controller -========================================================== - -Reference: - -https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf - -The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan -management with temperature and remote voltage sensing. Various fan control -features are provided, including PWM frequency control, temperature hysteresis, -dual tachometer measurements, and fan health monitoring. - -Required properties: -- compatible : One of "maxim,max31785" or "maxim,max31785a" -- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55. - -Example: - - fans@52 { - compatible = "maxim,max31785"; - reg = <0x52>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml index b1ff496f87f9..b2dc813b1ab4 100644 --- a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml +++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml @@ -20,7 +20,11 @@ description: > properties: compatible: - const: maxim,max31790 + enum: + - maxim,max31785 + - maxim,max31785a + - maxim,max31785b + - maxim,max31790 reg: maxItems: 1 -- 2.50.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document 2025-08-15 19:47 ` [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James @ 2025-08-16 0:13 ` Rob Herring 0 siblings, 0 replies; 11+ messages in thread From: Rob Herring @ 2025-08-16 0:13 UTC (permalink / raw) To: Eddie James; +Cc: linux-aspeed, devicetree, andrew, conor+dt, krzk+dt On Fri, Aug 15, 2025 at 2:47 PM Eddie James <eajames@linux.ibm.com> wrote: > > The binding for the max31785 is the same as the max31790, so just add > some compatible strings for the max31785 chip. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > --- > .../devicetree/bindings/hwmon/max31785.txt | 22 ------------------- > .../bindings/hwmon/maxim,max31790.yaml | 6 ++++- > 2 files changed, 5 insertions(+), 23 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt Reviewed-by: Rob Herring (Arm) <robh@kernel.org> ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v4 4/4] ARM: dts: aspeed: Add Balcones system 2025-08-15 19:47 [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system Eddie James ` (2 preceding siblings ...) 2025-08-15 19:47 ` [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James @ 2025-08-15 19:47 ` Eddie James 2025-08-15 23:38 ` [PATCH v4 0/4] " Rob Herring (Arm) 4 siblings, 0 replies; 11+ messages in thread From: Eddie James @ 2025-08-15 19:47 UTC (permalink / raw) To: linux-aspeed; +Cc: devicetree, andrew, conor+dt, krzk+dt, robh, eajames The Balcones system is similar to Bonnell but with a POWER11 processor. Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI tree is needed. Therefore, split up the quad chip FSI tree. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++ .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++ .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +---------------- 4 files changed, 1391 insertions(+), 767 deletions(-) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index 8062c685f7e8..9c2c44bfeb9a 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-facebook-yosemite4.dtb \ + aspeed-bmc-ibm-balcones.dtb \ aspeed-bmc-ibm-blueridge.dtb \ aspeed-bmc-ibm-bonnell.dtb \ aspeed-bmc-ibm-everest.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts new file mode 100644 index 000000000000..63fcb7a7619a --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts @@ -0,0 +1,609 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2025 IBM Corp. +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include "aspeed-g6.dtsi" +#include "ibm-power11-dual.dtsi" + +/ { + model = "Balcones"; + compatible = "ibm,balcones-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + i2c16 = &i2c11mux0chn0; + i2c17 = &i2c11mux0chn1; + i2c18 = &i2c11mux0chn2; + i2c19 = &i2c11mux0chn3; + }; + + chosen { + stdout-path = &uart5; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-fan0-presence { + gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>; + label = "fan0-presence"; + linux,code = <6>; + }; + + event-fan1-presence { + gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>; + label = "fan1-presence"; + linux,code = <7>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; + + leds { + compatible = "gpio-leds"; + + led-fan0 { + gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>; + }; + + led-fan1 { + gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>; + }; + + led-rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + led-rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + event_log: region@b3d00000 { + reg = <0xb3d00000 0x100000>; + no-map; + }; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + reg = <0xb4000000 0x04000000>; /* 64M */ + no-map; + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + no-map; + }; + }; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emmc { + clk-phase-mmc-hs200 = <180>, <180>; + status = "okay"; +}; + +&emmc_controller { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","checkstop","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","fan-ctlr-reset","rtc-battery-voltage-read-enable", + "reset-cause-pinhole","","","","", + /*G0-G7*/ "fan0","fan1","","","","","","", + /*H0-H7*/ "","","rear-enc-id0","rear-enc-fault0","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","", + "","","", + /*S0-S7*/ "presence-ps0","presence-ps1","","","power-ffs-sync-history","","", + "", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; + + usb-power-hog { + gpio-hog; + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&i2c0 { + status = "okay"; + + gpio@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", + "RUSSEL_FW_I2C_ENABLE_N", + "RUSSEL_OPPANEL_PRESENCE_N", + "BLYTH_OPPANEL_PRESENCE_N", + "CPU_TPM_CARD_PRESENT_N", + "", + "", + "DASD_BP_PRESENT_N"; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + pmic@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c3 { + status = "okay"; + + power-supply@5a { + compatible = "acbel,fsg032"; + reg = <0x5a>; + }; + + power-supply@5b { + compatible = "acbel,fsg032"; + reg = <0x5b>; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + led-controller@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard2-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard2-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + multi-master; + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + pwm@53 { + compatible = "maxim,max31785a"; + reg = <0x53>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "front-sys-id0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "front-check-log0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "front-enc-fault1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "front-sys-pwron0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + lcd-controller@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + pressure-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; +}; + +&i2c8 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", + "APSS_RESET_N", + "", + "N_MODE_CPU_N", + "", + "", + "P10_DCM_PRESENT", + ""; + }; + + led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", + "", + "SLOT2_PRSNT_EN_RSVD", + "", + "", + "", + "", + "SLOT2_EXPANDER_PRSNT_N", + "", + "", + "", + "", + "", + "", + "", + ""; + }; +}; + +&i2c9 { + status = "okay"; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + gpio@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "BOOT_RCVRY_TWI", + "BOOT_RCVRY_UART", + "", + "", + "", + "", + "", + "PE_SWITCH_RSTB_N"; + }; + + temperature-sensor@4c { + compatible = "ti,tmp435"; + reg = <0x4c>; + }; + + i2c-mux@75 { + compatible = "nxp,pca9849"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c11mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c11mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c11mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c11mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c12 { + status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + memory-region = <&event_log>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&kcs2 { + aspeed,lpc-io-reg = <0xca8 0xcac>; + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; +}; + +&lpc_ctrl { + memory-region = <&flash_memory>; + status = "okay"; +}; + +&mac2 { + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + use-ncsi; + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&uart2 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi new file mode 100644 index 000000000000..6db02d475380 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2025 IBM Corp. + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + + sbefifo100 = &sbefifo100; + sbefifo101 = &sbefifo101; + sbefifo110 = &sbefifo110; + sbefifo111 = &sbefifo111; + sbefifo112 = &sbefifo112; + sbefifo113 = &sbefifo113; + sbefifo114 = &sbefifo114; + sbefifo115 = &sbefifo115; + sbefifo202 = &sbefifo202; + sbefifo203 = &sbefifo203; + sbefifo210 = &sbefifo210; + sbefifo211 = &sbefifo211; + sbefifo214 = &sbefifo214; + sbefifo215 = &sbefifo215; + sbefifo216 = &sbefifo216; + sbefifo217 = &sbefifo217; + + scom100 = &scom100; + scom101 = &scom101; + scom110 = &scom110; + scom111 = &scom111; + scom112 = &scom112; + scom113 = &scom113; + scom114 = &scom114; + scom115 = &scom115; + scom202 = &scom202; + scom203 = &scom203; + scom210 = &scom210; + scom211 = &scom211; + scom214 = &scom214; + scom215 = &scom215; + scom216 = &scom216; + scom217 = &scom217; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + }; +}; + +&fsim0 { + bus-frequency = <100000000>; + #address-cells = <2>; + #size-cells = <0>; + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + status = "okay"; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom100: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo100: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom101: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo101: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom110: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo110: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom111: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo111: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom112: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo112: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom113: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo113: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom114: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo114: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom115: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo115: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub0: fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom202: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo202: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom203: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo203: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom210: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo210: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom211: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo211: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom214: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo214: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom215: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo215: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom216: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo216: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom217: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo217: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi index 68c941a194b6..7aa4113d3026 100644 --- a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi +++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi @@ -1,24 +1,10 @@ // SPDX-License-Identifier: GPL-2.0-or-later // Copyright 2024 IBM Corp. +#include "ibm-power11-dual.dtsi" + / { aliases { - i2c100 = &cfam0_i2c0; - i2c101 = &cfam0_i2c1; - i2c110 = &cfam0_i2c10; - i2c111 = &cfam0_i2c11; - i2c112 = &cfam0_i2c12; - i2c113 = &cfam0_i2c13; - i2c114 = &cfam0_i2c14; - i2c115 = &cfam0_i2c15; - i2c202 = &cfam1_i2c2; - i2c203 = &cfam1_i2c3; - i2c210 = &cfam1_i2c10; - i2c211 = &cfam1_i2c11; - i2c214 = &cfam1_i2c14; - i2c215 = &cfam1_i2c15; - i2c216 = &cfam1_i2c16; - i2c217 = &cfam1_i2c17; i2c300 = &cfam2_i2c0; i2c301 = &cfam2_i2c1; i2c310 = &cfam2_i2c10; @@ -36,22 +22,6 @@ aliases { i2c416 = &cfam3_i2c16; i2c417 = &cfam3_i2c17; - sbefifo100 = &sbefifo100; - sbefifo101 = &sbefifo101; - sbefifo110 = &sbefifo110; - sbefifo111 = &sbefifo111; - sbefifo112 = &sbefifo112; - sbefifo113 = &sbefifo113; - sbefifo114 = &sbefifo114; - sbefifo115 = &sbefifo115; - sbefifo202 = &sbefifo202; - sbefifo203 = &sbefifo203; - sbefifo210 = &sbefifo210; - sbefifo211 = &sbefifo211; - sbefifo214 = &sbefifo214; - sbefifo215 = &sbefifo215; - sbefifo216 = &sbefifo216; - sbefifo217 = &sbefifo217; sbefifo300 = &sbefifo300; sbefifo301 = &sbefifo301; sbefifo310 = &sbefifo310; @@ -69,22 +39,6 @@ aliases { sbefifo416 = &sbefifo416; sbefifo417 = &sbefifo417; - scom100 = &scom100; - scom101 = &scom101; - scom110 = &scom110; - scom111 = &scom111; - scom112 = &scom112; - scom113 = &scom113; - scom114 = &scom114; - scom115 = &scom115; - scom202 = &scom202; - scom203 = &scom203; - scom210 = &scom210; - scom211 = &scom211; - scom214 = &scom214; - scom215 = &scom215; - scom216 = &scom216; - scom217 = &scom217; scom300 = &scom300; scom301 = &scom301; scom310 = &scom310; @@ -102,14 +56,6 @@ aliases { scom416 = &scom416; scom417 = &scom417; - spi10 = &cfam0_spi0; - spi11 = &cfam0_spi1; - spi12 = &cfam0_spi2; - spi13 = &cfam0_spi3; - spi20 = &cfam1_spi0; - spi21 = &cfam1_spi1; - spi22 = &cfam1_spi2; - spi23 = &cfam1_spi3; spi30 = &cfam2_spi0; spi31 = &cfam2_spi1; spi32 = &cfam2_spi2; @@ -121,718 +67,7 @@ aliases { }; }; -&fsim0 { - #address-cells = <2>; - #size-cells = <0>; - status = "okay"; - bus-frequency = <100000000>; - cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom@1000 { - compatible = "ibm,p9-scom"; - reg = <0x1000 0x400>; - }; - - i2c@1800 { - compatible = "ibm,i2c-fsi"; - reg = <0x1800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam0_i2c0: i2c-bus@0 { - reg = <0>; /* OMI01 */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom100: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo100: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c1: i2c-bus@1 { - reg = <1>; /* OMI23 */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom101: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo101: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c10: i2c-bus@a { - reg = <10>; /* OP3A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom110: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo110: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c11: i2c-bus@b { - reg = <11>; /* OP3B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom111: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo111: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c12: i2c-bus@c { - reg = <12>; /* OP4A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom112: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo112: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c13: i2c-bus@d { - reg = <13>; /* OP4B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom113: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo113: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c14: i2c-bus@e { - reg = <14>; /* OP5A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom114: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo114: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c15: i2c-bus@f { - reg = <15>; /* OP5B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom115: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo115: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - }; - - fsi2spi@1c00 { - compatible = "ibm,fsi2spi"; - reg = <0x1c00 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam0_spi0: spi@0 { - compatible = "ibm,spi-fsi"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam0_spi1: spi@20 { - compatible = "ibm,spi-fsi"; - reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam0_spi2: spi@40 { - compatible = "ibm,spi-fsi"; - reg = <0x40>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam0_spi3: spi@60 { - compatible = "ibm,spi-fsi"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - }; - - sbefifo@2400 { - compatible = "ibm,p9-sbefifo"; - reg = <0x2400 0x400>; - - occ { - compatible = "ibm,p10-occ"; - - hwmon { - compatible = "ibm,p10-occ-hwmon"; - ibm,no-poll-on-init; - }; - }; - }; - - fsi_hub0: fsi@3400 { - compatible = "ibm,p9-fsi-controller"; - reg = <0x3400 0x400>; - #address-cells = <2>; - #size-cells = <0>; - }; - }; -}; - &fsi_hub0 { - cfam@1,0 { - reg = <1 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <1>; - - scom@1000 { - compatible = "ibm,p9-scom"; - reg = <0x1000 0x400>; - }; - - i2c@1800 { - compatible = "ibm,i2c-fsi"; - reg = <0x1800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam1_i2c2: i2c-bus@2 { - reg = <2>; /* OMI45 */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom202: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo202: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c3: i2c-bus@3 { - reg = <3>; /* OMI67 */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom203: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo203: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c10: i2c-bus@a { - reg = <10>; /* OP3A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom210: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo210: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c11: i2c-bus@b { - reg = <11>; /* OP3B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom211: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo211: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c14: i2c-bus@e { - reg = <14>; /* OP5A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom214: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo214: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c15: i2c-bus@f { - reg = <15>; /* OP5B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom215: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo215: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c16: i2c-bus@10 { - reg = <16>; /* OP6A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom216: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo216: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c17: i2c-bus@11 { - reg = <17>; /* OP6B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom217: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo217: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - }; - - fsi2spi@1c00 { - compatible = "ibm,fsi2spi"; - reg = <0x1c00 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam1_spi0: spi@0 { - compatible = "ibm,spi-fsi"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam1_spi1: spi@20 { - compatible = "ibm,spi-fsi"; - reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam1_spi2: spi@40 { - compatible = "ibm,spi-fsi"; - reg = <0x40>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam1_spi3: spi@60 { - compatible = "ibm,spi-fsi"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - }; - - sbefifo@2400 { - compatible = "ibm,p9-sbefifo"; - reg = <0x2400 0x400>; - - occ { - compatible = "ibm,p10-occ"; - - hwmon { - compatible = "ibm,p10-occ-hwmon"; - ibm,no-poll-on-init; - }; - }; - }; - - fsi@3400 { - compatible = "ibm,p9-fsi-controller"; - reg = <0x3400 0x400>; - #address-cells = <2>; - #size-cells = <0>; - no-scan-on-init; - }; - }; - cfam@2,0 { reg = <2 0>; #address-cells = <1>; -- 2.50.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system 2025-08-15 19:47 [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system Eddie James ` (3 preceding siblings ...) 2025-08-15 19:47 ` [PATCH v4 4/4] ARM: dts: aspeed: Add Balcones system Eddie James @ 2025-08-15 23:38 ` Rob Herring (Arm) 2025-08-20 19:40 ` Eddie James 4 siblings, 1 reply; 11+ messages in thread From: Rob Herring (Arm) @ 2025-08-15 23:38 UTC (permalink / raw) To: Eddie James; +Cc: linux-aspeed, conor+dt, devicetree, andrew, krzk+dt On Fri, 15 Aug 2025 14:47:26 -0500, Eddie James wrote: > The Balcones system is similar to Bonnell but with a POWER11 processor. > > Changes since v3: > - Add max31785 to the max31790 document instead of to trivial-devices > - Fix minor formatting in dps310 document > > Changes since v2: > - Fix a couple of incorrect i2c addresses > - Document dps310 and max31785 properly > - Drop the UCD binding documentation update, it's been fixed > > Changes since v1: > - Add all the ucd9000 driver supported compatible strings > - Fix node ordering in Balcones device tree > - Improve commit message to explain addition of ibm-power11-dual.dtsi > > Eddie James (4): > dt-bindings: arm: aspeed: add IBM Balcones board > dt-bindings: iio: Add Infineon DPS310 sensor documentation > dt-bindings: hwmon: Move max31785 compatibles to max31790 document > ARM: dts: aspeed: Add Balcones system > > .../bindings/arm/aspeed/aspeed.yaml | 1 + > .../devicetree/bindings/hwmon/max31785.txt | 22 - > .../bindings/hwmon/maxim,max31790.yaml | 6 +- > .../iio/pressure/infineon,dps310.yaml | 44 + > .../devicetree/bindings/trivial-devices.yaml | 2 - > MAINTAINERS | 1 + > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++ > .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++ > .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +---------------- > 10 files changed, 1442 insertions(+), 792 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt > create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts > create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi > > -- > 2.50.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Base: attempting to guess base-commit... Base: tags/next-20250815 (exact match) If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250815194730.41695-1-eajames@linux.ibm.com: arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$' from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pwm@52 (maxim,max31785a): '#address-cells', '#size-cells' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /: failed to match any schema with compatible: ['ibm,bonnell-bmc', 'aspeed,ast2600'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system 2025-08-15 23:38 ` [PATCH v4 0/4] " Rob Herring (Arm) @ 2025-08-20 19:40 ` Eddie James 2025-09-03 5:19 ` Andrew Jeffery 0 siblings, 1 reply; 11+ messages in thread From: Eddie James @ 2025-08-20 19:40 UTC (permalink / raw) To: Rob Herring (Arm); +Cc: linux-aspeed, conor+dt, devicetree, andrew, krzk+dt On 8/15/25 6:38 PM, Rob Herring (Arm) wrote: > On Fri, 15 Aug 2025 14:47:26 -0500, Eddie James wrote: >> The Balcones system is similar to Bonnell but with a POWER11 processor. >> >> Changes since v3: >> - Add max31785 to the max31790 document instead of to trivial-devices >> - Fix minor formatting in dps310 document >> >> Changes since v2: >> - Fix a couple of incorrect i2c addresses >> - Document dps310 and max31785 properly >> - Drop the UCD binding documentation update, it's been fixed >> >> Changes since v1: >> - Add all the ucd9000 driver supported compatible strings >> - Fix node ordering in Balcones device tree >> - Improve commit message to explain addition of ibm-power11-dual.dtsi >> >> Eddie James (4): >> dt-bindings: arm: aspeed: add IBM Balcones board >> dt-bindings: iio: Add Infineon DPS310 sensor documentation >> dt-bindings: hwmon: Move max31785 compatibles to max31790 document >> ARM: dts: aspeed: Add Balcones system >> >> .../bindings/arm/aspeed/aspeed.yaml | 1 + >> .../devicetree/bindings/hwmon/max31785.txt | 22 - >> .../bindings/hwmon/maxim,max31790.yaml | 6 +- >> .../iio/pressure/infineon,dps310.yaml | 44 + >> .../devicetree/bindings/trivial-devices.yaml | 2 - >> MAINTAINERS | 1 + >> arch/arm/boot/dts/aspeed/Makefile | 1 + >> .../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++ >> .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++ >> .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +---------------- >> 10 files changed, 1442 insertions(+), 792 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt >> create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml >> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts >> create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi >> >> -- >> 2.50.1 >> >> >> Andrew, are these warnings acceptable? Thanks, Eddie > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > This patch series was applied (using b4) to base: > Base: attempting to guess base-commit... > Base: tags/next-20250815 (exact match) > > If this is not the correct base, please add 'base-commit' tag > (or use b4 which does this automatically) > > New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250815194730.41695-1-eajames@linux.ibm.com: > > arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long > from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$' > from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object' > from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long > from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long > from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pwm@52 (maxim,max31785a): '#address-cells', '#size-cells' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /: failed to match any schema with compatible: ['ibm,bonnell-bmc', 'aspeed,ast2600'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' > from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# > > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system 2025-08-20 19:40 ` Eddie James @ 2025-09-03 5:19 ` Andrew Jeffery 0 siblings, 0 replies; 11+ messages in thread From: Andrew Jeffery @ 2025-09-03 5:19 UTC (permalink / raw) To: Eddie James, Rob Herring (Arm) Cc: linux-aspeed, conor+dt, devicetree, krzk+dt Hi Eddie, On Wed, 2025-08-20 at 14:40 -0500, Eddie James wrote: > > On 8/15/25 6:38 PM, Rob Herring (Arm) wrote: > > On Fri, 15 Aug 2025 14:47:26 -0500, Eddie James wrote: > > > The Balcones system is similar to Bonnell but with a POWER11 processor. > > > > > > Changes since v3: > > > - Add max31785 to the max31790 document instead of to trivial-devices > > > - Fix minor formatting in dps310 document > > > > > > Changes since v2: > > > - Fix a couple of incorrect i2c addresses > > > - Document dps310 and max31785 properly > > > - Drop the UCD binding documentation update, it's been fixed > > > > > > Changes since v1: > > > - Add all the ucd9000 driver supported compatible strings > > > - Fix node ordering in Balcones device tree > > > - Improve commit message to explain addition of ibm-power11-dual.dtsi > > > > > > Eddie James (4): > > > dt-bindings: arm: aspeed: add IBM Balcones board > > > dt-bindings: iio: Add Infineon DPS310 sensor documentation > > > dt-bindings: hwmon: Move max31785 compatibles to max31790 document > > > ARM: dts: aspeed: Add Balcones system > > > > > > .../bindings/arm/aspeed/aspeed.yaml | 1 + > > > .../devicetree/bindings/hwmon/max31785.txt | 22 - > > > .../bindings/hwmon/maxim,max31790.yaml | 6 +- > > > .../iio/pressure/infineon,dps310.yaml | 44 + > > > .../devicetree/bindings/trivial-devices.yaml | 2 - > > > MAINTAINERS | 1 + > > > arch/arm/boot/dts/aspeed/Makefile | 1 + > > > .../dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++ > > > .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++ > > > .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +---------------- > > > 10 files changed, 1442 insertions(+), 792 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/hwmon/max31785.txt > > > create mode 100644 Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml > > > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts > > > create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi > > > > > > -- > > > 2.50.1 > > > > > > > > > > > Andrew, are these warnings acceptable? > Please fix (at least) the maxim,max31785a-related warnings (rename child nodes). Andrew ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document @ 2025-08-17 15:09 kernel test robot 0 siblings, 0 replies; 11+ messages in thread From: kernel test robot @ 2025-08-17 15:09 UTC (permalink / raw) To: oe-kbuild; +Cc: lkp :::::: :::::: Manual check reason: "dtcheck: binding changes may go via different trees" :::::: BCC: lkp@intel.com CC: oe-kbuild-all@lists.linux.dev In-Reply-To: <20250815194730.41695-4-eajames@linux.ibm.com> References: <20250815194730.41695-4-eajames@linux.ibm.com> TO: Eddie James <eajames@linux.ibm.com> TO: linux-aspeed@lists.ozlabs.org CC: devicetree@vger.kernel.org CC: andrew@codeconstruct.com.au CC: conor+dt@kernel.org CC: krzk+dt@kernel.org CC: robh@kernel.org CC: eajames@linux.ibm.com Hi Eddie, kernel test robot noticed the following build warnings: [auto build test WARNING on robh/for-next] [also build test WARNING on groeck-staging/hwmon-next jic23-iio/togreg linus/master v6.17-rc1 next-20250815] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Eddie-James/dt-bindings-arm-aspeed-add-IBM-Balcones-board/20250816-035100 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next patch link: https://lore.kernel.org/r/20250815194730.41695-4-eajames%40linux.ibm.com patch subject: [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document :::::: branch date: 2 days ago :::::: commit date: 2 days ago config: arm-randconfig-051-20250816 (https://download.01.org/0day-ci/archive/20250817/202508172243.9dmmYpJP-lkp@intel.com/config) compiler: arm-linux-gnueabi-gcc (GCC) 8.5.0 dtschema version: 2025.6.2.dev4+g8f79ddd reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250817/202508172243.9dmmYpJP-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/r/202508172243.9dmmYpJP-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: tca9554@20 (ti,tca9554): '#address-cells', '#size-cells' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@0: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@1: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: tca9554@20 (ti,tca9554): '#address-cells', '#size-cells' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: pca9849@75 (nxp,pca9849): $nodename:0: 'pca9849@75' does not match '^(i2c-?)?mux' from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: pca9849@75 (nxp,pca9849): Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' were unexpected) from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long -- arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: pca9552@32 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: pca9552@33 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: pca9552@30 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: pca9552@34 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: pca9552@35 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/bus@1e78a000/i2c@780/i2c-mux@70/i2c@3/max31785@52/fan@0: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/bus@1e78a000/i2c@780/i2c-mux@70/i2c@3/max31785@52/fan@1: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/bus@1e78a000/i2c@780/i2c-mux@70/i2c@3/max31785@52/fan@2: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/bus@1e78a000/i2c@780/i2c-mux@70/i2c@3/max31785@52/fan@3: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: pca9552@60 (nxp,pca9552): 'led@10', 'led@11', 'led@12', 'led@13' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] -- arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: i2c-mux@70 (nxp,pca9546): Unevaluated properties are not allowed ('reset-gpio' was unexpected) from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pwm@52 (maxim,max31785a): '#address-cells', '#size-cells' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] -- arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: tca9554@20 (ti,tca9554): '#address-cells', '#size-cells' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: pca9552@31 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: pca9552@32 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: pca9552@33 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@0: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@1: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@2: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@3: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@4: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@5: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] -- arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: tca9554@20 (ti,tca9554): '#address-cells', '#size-cells' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: pca9552@31 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: pca9552@32 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: pca9552@33 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@0: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@1: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@2: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@3: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@4: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@5: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] -- arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: tca9554@20 (ti,tca9554): '#address-cells', '#size-cells' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: pca9552@31 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: pca9552@32 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: pca9552@33 (ibm,pca9552): 'led@10', 'led@11', 'led@12', 'led@13', 'led@14', 'led@15' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3', 'fan@4', 'fan@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@0: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@1: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@2: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@3: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@4: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/bus@1e78a000/i2c@400/max31785@52/fan@5: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] -- arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: bmp280@77 (bosch,bmp280): '#io-channel-cells' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: bmp280@77 (bosch,bmp280): 'vddd-supply' is a required property from schema $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: bmp280@77 (bosch,bmp280): 'vdda-supply' is a required property from schema $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells', 'fan@0', 'fan@1', 'fan@2', 'fan@3' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan@0: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan@1: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan@2: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@200/max31785@52/fan@3: failed to match any schema with compatible: ['pmbus-fan'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: pca9552@60 (nxp,pca9552): 'gpio@0', 'gpio@1', 'gpio@10', 'gpio@11', 'gpio@12', 'gpio@13', 'gpio@14', 'gpio@15', 'gpio@2', 'gpio@3', 'gpio@4', 'gpio@5', 'gpio@6', 'gpio@7', 'gpio@8', 'gpio@9' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@280/ir35221@70: failed to match any schema with compatible: ['infineon,ir35221'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@280/ir35221@71: failed to match any schema with compatible: ['infineon,ir35221'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dtb: /ahb/apb/bus@1e78a000/i2c@300/ir35221@70: failed to match any schema with compatible: ['infineon,ir35221'] -- arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2500-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2500-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: bmp280@77 (bosch,bmp280): '#io-channel-cells' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: bmp280@77 (bosch,bmp280): 'vddd-supply' is a required property from schema $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: bmp280@77 (bosch,bmp280): 'vdda-supply' is a required property from schema $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: max31785@52 (maxim,max31785a): '#address-cells', '#size-cells' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: pca9552@60 (nxp,pca9552): 'gpio@0', 'gpio@1', 'gpio@10', 'gpio@11', 'gpio@12', 'gpio@13', 'gpio@14', 'gpio@15', 'gpio@2', 'gpio@3', 'gpio@4', 'gpio@5', 'gpio@6', 'gpio@7', 'gpio@8', 'gpio@9' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: /ahb/apb/bus@1e78a000/i2c@140/ir35221@70: failed to match any schema with compatible: ['infineon,ir35221'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: /ahb/apb/bus@1e78a000/i2c@140/ir35221@71: failed to match any schema with compatible: ['infineon,ir35221'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: /ahb/apb/bus@1e78a000/i2c@180/ir35221@70: failed to match any schema with compatible: ['infineon,ir35221'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: /ahb/apb/bus@1e78a000/i2c@180/ir35221@71: failed to match any schema with compatible: ['infineon,ir35221'] arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: pca9552@60 (nxp,pca9552): 'gpio@0', 'gpio@1', 'gpio@10', 'gpio@11', 'gpio@12', 'gpio@13', 'gpio@14', 'gpio@15', 'gpio@2', 'gpio@3', 'gpio@4', 'gpio@5', 'gpio@6', 'gpio@7', 'gpio@8', 'gpio@9' do not match any of the regexes: '^led@[0-9a-f]$', '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dtb: leds (gpio-leds): 'fan0', 'fan1', 'fan2', 'fan3', 'front-fault', 'front-id', 'front-power', 'power-button', 'rear-fault', 'rear-id', 'rear-power' do not match any of the regexes: '(^led-[0-9a-f]$|led)', '^pinctrl-[0-9]+$' -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2025-09-03 5:19 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-08-15 19:47 [PATCH v4 0/4] ARM: dts: aspeed: Add Balcones system Eddie James 2025-08-15 19:47 ` [PATCH v4 1/4] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James 2025-08-16 0:14 ` Rob Herring 2025-08-15 19:47 ` [PATCH v4 2/4] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James 2025-08-15 19:47 ` [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James 2025-08-16 0:13 ` Rob Herring 2025-08-15 19:47 ` [PATCH v4 4/4] ARM: dts: aspeed: Add Balcones system Eddie James 2025-08-15 23:38 ` [PATCH v4 0/4] " Rob Herring (Arm) 2025-08-20 19:40 ` Eddie James 2025-09-03 5:19 ` Andrew Jeffery -- strict thread matches above, loose matches on Subject: below -- 2025-08-17 15:09 [PATCH v4 3/4] dt-bindings: hwmon: Move max31785 compatibles to max31790 document kernel test robot
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.