From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
broonie@kernel.org, lee@kernel.org, lgirdwood@gmail.com,
sre@kernel.org, heiko@sntech.de, conor+dt@kernel.org,
krzk+dt@kernel.org, robh@kernel.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH v8 5/5] arm64: dts: rockchip: Add USB and charger to Gameforce Ace
Date: Thu, 4 Sep 2025 11:05:30 -0500 [thread overview]
Message-ID: <20250904160530.66178-6-macroalpha82@gmail.com> (raw)
In-Reply-To: <20250904160530.66178-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add support for the BQ25703A charger manager and boost regulator to
the Gameforce Ace. Add the USB-C port and PHY as well as they all
depend on each other for operation.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
.../dts/rockchip/rk3588s-gameforce-ace.dts | 122 ++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
index 55fc7cbef58d..f5894672fcbd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
@@ -612,6 +612,56 @@ &i2c6 {
pinctrl-0 = <&i2c6m3_xfer>;
status = "okay";
+ fusb302: typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&usbc0_int>;
+ pinctrl-names = "default";
+ vbus-supply = <&usb_otg_vbus>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
+ PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+
rtc_hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
@@ -640,8 +690,34 @@ battery@62 {
0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>;
cellwise,monitor-interval-ms = <5000>;
monitored-battery = <&battery>;
+ power-supplies = <&bq25703>;
status = "okay";
};
+
+ bq25703: charger@6b {
+ compatible = "ti,bq25703a";
+ reg = <0x6b>;
+ input-current-limit-microamp = <5000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD5 IRQ_TYPE_LEVEL_LOW>;
+ monitored-battery = <&battery>;
+ pinctrl-0 = <&charger_int_h>;
+ pinctrl-names = "default";
+ power-supplies = <&fusb302>;
+
+ regulators {
+ usb_otg_vbus: vbus {
+ enable-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&boost_enable_h>;
+ pinctrl-names = "default";
+ regulator-max-microamp = <960000>;
+ regulator-max-microvolt = <5088000>;
+ regulator-min-microamp = <512000>;
+ regulator-min-microvolt = <4992000>;
+ regulator-name = "usb_otg_vbus";
+ };
+ };
+ };
};
&i2c7 {
@@ -853,6 +929,12 @@ usbc0_int: usbc0-int {
rockchip,pins =
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
};
+
+ usbc_sbu_dc: usbc-sbu-dc {
+ rockchip,pins =
+ <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
vcc3v3-lcd {
@@ -1286,6 +1368,46 @@ bluetooth {
};
};
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ pinctrl-0 = <&usbc_sbu_dc>;
+ pinctrl-names = "default";
+ sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};
+
&vop {
status = "okay";
};
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
broonie@kernel.org, lee@kernel.org, lgirdwood@gmail.com,
sre@kernel.org, heiko@sntech.de, conor+dt@kernel.org,
krzk+dt@kernel.org, robh@kernel.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH v8 5/5] arm64: dts: rockchip: Add USB and charger to Gameforce Ace
Date: Thu, 4 Sep 2025 11:05:30 -0500 [thread overview]
Message-ID: <20250904160530.66178-6-macroalpha82@gmail.com> (raw)
In-Reply-To: <20250904160530.66178-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add support for the BQ25703A charger manager and boost regulator to
the Gameforce Ace. Add the USB-C port and PHY as well as they all
depend on each other for operation.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
.../dts/rockchip/rk3588s-gameforce-ace.dts | 122 ++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
index 55fc7cbef58d..f5894672fcbd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
@@ -612,6 +612,56 @@ &i2c6 {
pinctrl-0 = <&i2c6m3_xfer>;
status = "okay";
+ fusb302: typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&usbc0_int>;
+ pinctrl-names = "default";
+ vbus-supply = <&usb_otg_vbus>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
+ PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+
rtc_hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
@@ -640,8 +690,34 @@ battery@62 {
0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>;
cellwise,monitor-interval-ms = <5000>;
monitored-battery = <&battery>;
+ power-supplies = <&bq25703>;
status = "okay";
};
+
+ bq25703: charger@6b {
+ compatible = "ti,bq25703a";
+ reg = <0x6b>;
+ input-current-limit-microamp = <5000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD5 IRQ_TYPE_LEVEL_LOW>;
+ monitored-battery = <&battery>;
+ pinctrl-0 = <&charger_int_h>;
+ pinctrl-names = "default";
+ power-supplies = <&fusb302>;
+
+ regulators {
+ usb_otg_vbus: vbus {
+ enable-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&boost_enable_h>;
+ pinctrl-names = "default";
+ regulator-max-microamp = <960000>;
+ regulator-max-microvolt = <5088000>;
+ regulator-min-microamp = <512000>;
+ regulator-min-microvolt = <4992000>;
+ regulator-name = "usb_otg_vbus";
+ };
+ };
+ };
};
&i2c7 {
@@ -853,6 +929,12 @@ usbc0_int: usbc0-int {
rockchip,pins =
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
};
+
+ usbc_sbu_dc: usbc-sbu-dc {
+ rockchip,pins =
+ <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
vcc3v3-lcd {
@@ -1286,6 +1368,46 @@ bluetooth {
};
};
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ pinctrl-0 = <&usbc_sbu_dc>;
+ pinctrl-names = "default";
+ sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};
+
&vop {
status = "okay";
};
--
2.43.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-09-04 16:08 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-04 16:05 [PATCH v8 0/5] Add Texas Instruments BQ25703A Charger Chris Morgan
2025-09-04 16:05 ` Chris Morgan
2025-09-04 16:05 ` [PATCH v8 1/5] dt-bindings: mfd: ti,bq25703a: Add TI " Chris Morgan
2025-09-04 16:05 ` Chris Morgan
2025-09-04 16:05 ` [PATCH v8 2/5] mfd: bq257xx: Add support for BQ25703A core driver Chris Morgan
2025-09-04 16:05 ` Chris Morgan
2025-09-04 16:05 ` [PATCH v8 3/5] power: supply: bq257xx: Add support for BQ257XX charger Chris Morgan
2025-09-04 16:05 ` Chris Morgan
2025-09-04 16:05 ` [PATCH v8 4/5] regulator: bq257xx: Add bq257xx boost regulator driver Chris Morgan
2025-09-04 16:05 ` Chris Morgan
2025-09-04 16:05 ` Chris Morgan [this message]
2025-09-04 16:05 ` [PATCH v8 5/5] arm64: dts: rockchip: Add USB and charger to Gameforce Ace Chris Morgan
2025-09-11 14:56 ` (subset) [PATCH v8 0/5] Add Texas Instruments BQ25703A Charger Lee Jones
2025-09-11 14:59 ` Lee Jones
2025-09-11 14:59 ` Lee Jones
2025-09-29 16:18 ` Rob Herring
2025-09-29 16:18 ` Rob Herring
2025-10-01 9:49 ` Lee Jones
2025-10-01 9:49 ` Lee Jones
2025-10-09 12:47 ` Lee Jones
2025-10-09 12:47 ` Lee Jones
2025-09-11 15:51 ` [GIT PULL] Immutable branch between MFD, Power and Regulator due for the v6.18 merge window Lee Jones
2025-09-11 15:51 ` Lee Jones
2025-09-12 7:36 ` (subset) [PATCH v8 0/5] Add Texas Instruments BQ25703A Charger Heiko Stuebner
2025-09-12 7:36 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250904160530.66178-6-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.